Suppressing Hepatitis B Virus Replication Using Viral Antigen-Specific T Cells

Published: May 31, 2024

Abstract

Source: Xiong, X., et al. Stem Cell-Derived Viral Ag-Specific T Lymphocytes Suppress HBV Replication in Mice. J. Vis. Exp. (2019).

The video demonstrates an assay using human induced pluripotent stem cell (iPSC)-derived CD8+ T cells to inhibit hepatitis B virus (HBV) replication in mice. These T cells, engineered with HBV-specific receptors, are transferred into transgenic mice. Replication-competent HBV genome plasmids are then injected directly into the liver, enabling viral DNA uptake. Once viral antigens are expressed and presented by hybrid MHC-I molecules, the engineered T cells recognize and bind to these complexes. This triggers the release of cytotoxic molecules, resulting in the destruction of HBV-infected liver cells and suppression of viral replication.

Protocol

All procedures involving animal models have been reviewed by the local
institutional animal care committee and the JoVE veterinary review board. All procedures involving sample collection have been performed in accordance with the institute's IRB guidelines.

1. Generation of viral Ag-specific CD8+ T cells from iPSCs (iPSC-CD8+ T cells)

  1. Creation of the retroviral constructs
    NOTE: T-cell receptor (TCR) α and β genes are linked with 2A self-cleaving sequence. The retroviral vector MSCV-IRES-DsRed (MiDR) is DsRed+.
    1. Sub-clone HBs183-191 (FLLTRILTI)-specific A2-restricted human-murine hybrid TCR (s183 TCR) genes (Vα34 and Vβ28) into the MiDR to create the s183 MiDR construct (Figure 1A).
  2. Retroviral transduction
    NOTE:
    The Platinum-E (Plat-E) cells are used for packaging retroviruses (carrying s183 TCR genes), which will be used for retroviral transduction. The Plat-E cells are effective retrovirus packaging cells underlying the 293T cells, which were developed by means of unique packaging constructs via the EF1α promoter to express retroviral structure protein, including gag, pol, and ecotropic env.
    1. On a 100 mm culture dish, seed 3 x 106 Plat-E cells in 8 mL of DMEM culture medium containing 10% fetal calf serum (FCS) in an incubator at 37 °C with 5% CO2, 1 day before transfection.
    2. On day 0, transfect the s183 MiDR construct into the Plat-E cells using a DNA transfection reagent.
    3. On day 1, seed 1 x 106 iPSCs (green fluorescent protein [GFP]+) into a gelatin pre-coated culture plate.
    4. On days 2–3, collect retroviruses-containing supernatant from Plat-E cell culture to transduce iPSCs with the s183 TCR in the presence of 1,6-dibromohexane solution.
    5. On day 4, trypsinize the s183 TCR gene-transduced iPSCs, centrifuge at 400 x g for 5 min, and seed 3 × 105 iPSCs in a 100 mm culture dish pre-coated with 3 x 106 irradiated SNL76/7 (irSNL76/7) feeder cells.
    6. On day 5 or 6 of confluence, trypsinize the cells, centrifuge at 400 x g for 5 min, and process for cell sorting. Gating on live cells, sort GFP and DsRED double-positive cells (the s183 TCR gene-transduced iPSCs) using a high-speed cell sorter. Similar to step 1.2.5, co-culture the sorted cells on irSNL76/7 feeder cells for future use.
  3. Differentiation of HBV-specific iPSC-CD8+ T cells
    NOTE: The OP9-DL1/DL4 stromal cells overexpress both Notch ligands DL1 and DL4, and co-culturing iPSCs with the iPSCs can promote Notch signaling-mediated T cell differentiation.
    1. Grow s183 TCR gene-transduced iPSCs (s183/iPSCs) in the OP9-DL1-DL4 cell monolayer in α-minimum essential medium (MEM) media containing 20% fetal bovine serum (FBS). Include murine FMS‐like tyrosine kinase 3 (Flt3) ligand (mFlt-3L; final concentration = 5 ng/mL) in the culture.
    2. On day 0, seed 0.5–1.0 x 105 S183/iPSCs in a 10 cm culture dish previously grown with OP9-DL1-DL4 cells. Validate that the OP9-DL1-DL4 cells are in a condition of 80%–90% confluency.
    3. On day 5, rinse the iPSCs with 10 mL of phosphate-buffered saline (PBS), aspirate off the PBS, add this to 4 mL of 0.25% trypsin, and incubate in a 37 °C incubator for 10 min. Afterward, add a supplementary 8 mL of iPSC media to end trypsin digestion. Accumulate all the digestive solutions containing the cells and centrifuge at 400 x g for 5 min at 15–30 °C.
    4. Aspirate the supernatant and resuspend cells in 10 mL of iPSC media. Transfer the cell suspension to a new 10 cm Petri plate and incubate in an incubator for 30 min at 37 °C.
    5. After 30 min, collect the iPSC media containing the floating cells. Pass the cell suspension through a 70 μm cell strainer and calculate the cell number.
    6. Seed 5 x 105 cells in the culture dish previously grown OP9-DL1-DL4 cells with a condition of 80%–90% confluent, as described in step 1.3.1.
      NOTE: For T cell differentiation, each 2–3 days, the iPSC-derived cells need to re-seed with a fresh layer of the OP9-DL1-DL4 cells.
  4. Evaluation
    1. Morphological changes of differentiating iPSCs
      1. Observe cells under a microscope on various days.
        NOTE: By day 5, colonies have mesoderm-like characteristics, exhibiting a classic spindle-shaped morphology resembling human dermal fibroblasts and sustained growth in vitro. By day 8, small round clusters of cells begin to appear.
    2. Analysis of differentiating iPSCs by flow cytometry
      1. On various days of co-culture, analyze iPSC-derived cells as described previously (Figure 1B,C).
    3. Functional analysis of differentiating iPSCs
      1. On day 28 of co-culture, collect iPSC-CD8+ T cells from cultures by harvesting the floating cells, trypsinize the leftover cells with 0.25% trypsin, re-suspend in 8 mL of iPSC media, centrifuge for 5 min at 400 x g at 15–30 °C, remove the media, then resuspend the cells in 10 mL of media.
      2. Keep the re-suspended cells in a fresh 10 cm dish in a 37 °C incubator for 30 min and assemble the floating cells. Then rinse the cells one time with a cold PBS.
      3. Incubate 3 x 106 T cell-depleted splenocytes (CD4CD8) from spleens of H-2 class I knockout, HLA-A2.1-transgenic (HHD) mice with 5 µM s183 peptide (FLLTRILTI) in 200 μL of media at 4 °C for 30 min.
      4. Produce a mixture of iPSC-CD8+ T cells with splenocytes pulsed with s183 peptide (T cells: splenocytes = 1:4; use 0.75 x 106 T cells). Incubate the mixture of cells at 37 °C in a CO2 incubator for 40 h. During the last 7 h, add 4 µL of diluted brefeldin A into the culture (final concentration of 1,000x, which will be diluted in 1x culture media) to block transport processes during cell activation.
      5. Stain the cells and perform flow cytometric analysis of intracellular Interferon-gamma (IFN-γ) as described previously (Figure 2).

2. Induction of HBV replication through hydrodynamic delivery of HBV plasmid

NOTE: pAAV/HBV1.2 construct was generated as described previously. The HBV 1.2 complete DNA is incorporated in the vector pAAV.

  1. Hydrodynamic deliveries of HBV plasmid through the tail vein
    1. Heat HHD mice using a heat lamp for 5 min in the cage in order to dilate the tail vein.
    2. Detain the animal by means of a restrainer, and clean mouse tails with 70% ethanol spray.
    3. Delivery of plasmid into the liver.
    4. Measure the mouse's body weight by using a measuring scale.
    5. Dilute 10 μg of HBV plasmid in the 8% equivalent of body mass PBS (e.g., 1.6 mL for a 20 g mouse). Load diluted plasmid in a 3 mL syringe with a 26 G × 1⁄2″ (0.45 × 12 mm) hypodermic needle.
    6. Locate one of the two lateral tail veins in the middle third of the tail and position the needle into either lateral vein. Administer the injection containing HBV plasmid through the tail vein within 3 – 5 s.
  2. Quantification of viremia from blood serum of infected mice
    NOTE: HBV replication occurs from day 3–35 in the mouse serum. The DNA replication peaks on day 7 and reduces gradually. The HBV DNA is not cleared from the serum until day 35.
    1. Collection of blood serum from infected mice
      1. Collect approximately 0.1 mL of blood in a microcentrifuge tube from each mouse on 3, 5, 7, and 10 days post-infection by retro-orbital bleeding in a 1.5 mL microcentrifuge tube, then incubate at room temperature (RT) for 20 min.
      2. Centrifuge the sample at 6,000 x g for 15 min at 4 °C and collect the serum supernatant after centrifugation.
    2. Purify the DNA from the blood serum using a commercially available DNA extraction kit following the manufacturer's recommendations. Briefly, lyse the cells in a silica-based column, perform the washes, and extract DNA by adding 100% ethanol to the elution column and centrifuging at 6000 x g for 1 min. Elute the DNA in 50 µL of RNase-free water.
    3. Use 100 ng of HBV DNA from the elution for real-time PCR analysis. Use the following primers and probes: forward 5' TAGGAGGCTGTAGGCATAAATTGG 3'; reverse 5' GCACAGCTTGGAGGCTTGT 3'; probe 5' TCACCTCTGCCTAATC 3'.
      1. Use the HBV genome containing plasmid (pAAV/HBV1.2) for the standard curve and perform real-time PCR in a total volume of 10 μL (Figure 3).
    4. Set up the PCR reaction in a total volume of 10 μL, as shown in Table 1.
    5. Set up the PCR program in the thermocycler, as shown in Table 2. The programmed temperature transition rate is 20 °C/s for denaturation/annealing and 5 °C/s for extension. Measure the fluorescence at the end of the annealing phase for each cycle for real-time PCR monitoring.

3. Reduction of HBV replication by ACT of viral Ag-specific iPSC-CD8+ T cells

  1. Adoptive cell transfer (ACT)
    1. Differentiate s183/iPSCs (1.3.7) upon the OP9-DL1-DL4 stromal cells in the presence of mFlt-3L and mIL-7 for 8 days, as described in section 1.3.
    2. On day 22, collect iPSC-CD8+ T cells from the 10 cm plate with trypsin, then wash and resuspend each 10 cm plate in 10 mL of fresh media. Add the cells to a fresh 10 cm plate and return to the incubator for 30 min, as done in section 1.3. After 30 min, collect floating cells.
    3. Use a 70 μm nylon strainer to pass cells to eliminate cell clusters and count the cell number. Adapt the cells to a concentration of 1.5 x 107 cells/mL in cold PBS solution and use a 70 μm nylon strainer to pass cells to eliminate cell clusters again if needed. Keep cells on ice until the ACT.
    4. Inject 200 μL cell suspension (3 x 106 cells) into 4–6 week-old HHD mice through the tail vein.
  2. Induction of HBV replication
    1. On day 14 after cell transfer, perform the hydrodynamic delivery of HBV plasmid through the tail vein as described in section 2.1.

Table 1: PCR reaction volume

DNA template 2 ml
DNA master hybridization mixture ((Taq DNA polymerase, PCR reaction buffer, 10 mM MgCl2, and dNTP mixture) 1 ml
25 mM MgCl2 0.8 ml
0.3 μM the probe 3 ml
5 μM of each primer 3.2 ml
Total 10 ml

Table 2: PCR program

Denaturation Temperature
95 °C
Time
5 s
Annealing 53 °C 10 s
Extension 72 °C 20 s
5 °C

Representative Results

Figure 1
Figure 1: Generation of HBV viral Ag-specific iPSC-CD8+ T cells.

Mouse iPSCs are transduced with the following retroviral constructs: HBs183-91 TCR (MiDR-s183 TCR) or OVA257–264 TCR (MiDR-OVA TCR), and the transduced iPSCs are co-cultured with OP9-DL1/DL4 stromal cells for T lineage differentiation. (A) Schematic representation of the retroviral construct MiDR-s183 TCR expressing s183-specific TCR. Ψ = packaging signal; 2A = picornavirus self-cleaving 2A sequence; LTR = long terminal repeats. (B) Morphology of T cell differentiation on days 0, 7, 14, and 22. (C) Flow cytometric analysis for the iPSC-derived cells on day 28. CD3+CD8+ cells (left) are gated as indicated and analyzed for the expression of CD8 and TCRVβ28 (right). Data shown are representative of three individual experiments. The values represent mean ± SD (**p < 0.01; paired t-tests).

Figure 2
Figure 2: Functional analysis of the HBV viral Ag-specific iPSC-CD8+ T cells.

On day 28 of in vitro co-culture, the SP CD8+s183 TCR pentamer+ iPSC-T cells are sorted. The iPSC-T cells and CD8+ T cells transduced with MiDR-s183 TCR are stimulated by T-depleted splenocytes (APCs) from HHD mice and pulsed with s183 peptide (FLLTRILTI). (A) Intracellular staining of IFN-ϒ after 7 h (gated on CD8+ cells) (T/APCs = 1:4). (B) ELISA of IFN-γ after 40 h. Data shown are representative of three individual experiments. The values represent mean ± SD (n.s., p > 0.05; paired t-tests).

Figure 3
Figure 3: Induction of HBV replication in HHD mice by hydrodynamic injection.

HHD mice are i.v. administrated with HBV plasmid via hydrodynamic tail vein injection. 10 μg of the plasmid is injected with 8% of total body mass PBS. On indicated time points after injection, the serum is isolated from the blood and DNA is extracted for real-time PCR. Data shown are representative of three individual experiments. The values represent mean ± SD. Data are representative of five mice per group of three independent experiments. 

Divulgations

The authors have nothing to disclose.

Materials

HHD mice Institut Pasteur, Paris, France H-2 class I knockout, HLA-A2.1-transgenic (HHD) mice
iPS-MEF-Ng-20D-17 RIKEN Cell Bank APS0001
SNL76/7 ATCC SCRC-1049
OP9 ATCC CRL-2749
pAAV/HBV1.2 plasmid Dr. Dr. Pei-Jer Chen (National Taiwan University Hospital, Taiwan) HBV DNA construct
HBs183-91(s183) (FLLTRILTI)-specific TCR genes Dr. Adam J Gehring (Toronto General Hospital Research Institute, Toronto, Canada) FLLTRILTI-specific A2-restricted human-murine hybrid TCR genes (Vα34 and Vβ28)
OVA257–264-specific TCR genes Dr. Dario A. Vignali (University of Pittsburgh, PA) SIINFEKL-specific H-2Kb-restricted TCR genes
Anti-CD3 (17A2) antibody Biolegend 100236
Anti-CD44 (IM7) antibody BD Pharmingen 103012
Anti-CD4 (GK1.5) antibody Biolegend 100408
Anti-CD8 (53-6.7) antibody Biolegend 100732
Anti-IFN-γ (XMG1.2) antibody Biolegend 505810
Anti-TNF-a (MP6-XT22) antibody Biolegend 506306
α-MEM Invitrogen A10490-01
Anti-HBs antibody Thermo Fisher MA5-13059
ACK Lysis buffer Lonza 10-548E
Brefeldin A Sigma B7651
DMEM Invitrogen ABCD1234
FBS Hyclone SH3007.01
FACSAria Fusion cell sorter BD 656700
Gelatin MilliporeSigma G9391
GeneJammer Agilent 204130
HLA-A201-HBs183-91-PE pentamer Proimmune F027-4A – 27
HRP Anti-Mouse Secondary Antibody Invitrogen A27025
mFlt-3L Peprotech 250-31L
mIL-7 Peprotech 217-17
Nuclease S7 Roche 10107921001
Paraformaldehyde MilliporeSigma P6148-500G Caution: Allergenic, Carcenogenic, Toxic
Permeabilization buffer Biolegend 421002
Polybrene MilliporeSigma 107689
ProLong™ Gold Antifade Mountant with DAPI Invitrogen P36931
QIAamp MinElute Virus Spin Kit Qiagen 57704

Tags

This article has been published
Video Coming Soon
Keep me updated:

.

Citer Cet Article
Suppressing Hepatitis B Virus Replication Using Viral Antigen-Specific T Cells. J. Vis. Exp. (Pending Publication), e22236, doi: (2024).

View Video