Plasmonic 강화된 라이트 - 트래핑과 다결정 실리콘 박막 태양 전지

Summary

유리에 다결정 실리콘 박막 태양 전지는 crystallisation, 결함 패시베이션 및 metallisation 다음 붕소 및 인 도핑된 실리콘 레이어 증착에 의해 조작된다. 가벼운 트래핑 Plasmonic은 ~ 45 % photocurrent 향상의 결과로 확산 반사판으로 공을 실리콘 전지 표면에 자세의 nanoparticles을 형성하여 소개하고 있습니다.

Abstract

One of major approaches to cheaper solar cells is reducing the amount of semiconductor material used for their fabrication and making cells thinner. To compensate for lower light absorption such physically thin devices have to incorporate light-trapping which increases their optical thickness. Light scattering by textured surfaces is a common technique but it cannot be universally applied to all solar cell technologies. Some cells, for example those made of evaporated silicon, are planar as produced and they require an alternative light-trapping means suitable for planar devices. Metal nanoparticles formed on planar silicon cell surface and capable of light scattering due to surface plasmon resonance is an effective approach.

The paper presents a fabrication procedure of evaporated polycrystalline silicon solar cells with plasmonic light-trapping and demonstrates how the cell quantum efficiency improves due to presence of metal nanoparticles.

To fabricate the cells a film consisting of alternative boron and phosphorous doped silicon layers is deposited on glass substrate by electron beam evaporation. An Initially amorphous film is crystallised and electronic defects are mitigated by annealing and hydrogen passivation. Metal grid contacts are applied to the layers of opposite polarity to extract electricity generated by the cell. Typically, such a ~2 μm thick cell has a short-circuit current density (Jsc) of 14-16 mA/cm², which can be increased up to 17-18 mA/cm² (~25% higher) after application of a simple diffuse back reflector made of a white paint.

To implement plasmonic light-trapping a silver nanoparticle array is formed on the metallised cell silicon surface. A precursor silver film is deposited on the cell by thermal evaporation and annealed at 23°C to form silver nanoparticles. Nanoparticle size and coverage, which affect plasmonic light-scattering, can be tuned for enhanced cell performance by varying the precursor film thickness and its annealing conditions. An optimised nanoparticle array alone results in cell Jsc enhancement of about 28%, similar to the effect of the diffuse reflector. The photocurrent can be further increased by coating the nanoparticles by a low refractive index dielectric, like MgF₂, and applying the diffused reflector. The complete plasmonic cell structure comprises the polycrystalline silicon film, a silver nanoparticle array, a layer of MgF₂, and a diffuse reflector. The Jsc for such cell is 21-23 mA/cm², up to 45% higher than Jsc of the original cell without light-trapping or ~25% higher than Jsc for the cell with the diffuse reflector only.

Introduction

Light-trapping in silicon solar cells is commonly achieved via light scattering at textured interfaces. Scattered light travels through a cell at oblique angles for a longer distance and when such angles exceed the critical angle at the cell interfaces the light is permanently trapped in the cell by total internal reflection (Animation 1: Light-trapping). Although this scheme works well for most solar cells, there are developing technologies where ultra-thin Si layers are produced planar (e.g. layer-transfer technologies and epitaxial c-Si layers) ¹ and or when such layers are not compatible with textures substrates (e.g. evaporated silicon) ². For such originally planar Si layer alternative light trapping approaches, such as diffuse white paint reflector ³, silicon plasma texturing ⁴ or high refractive index nanoparticle reflector ⁵ have been suggested.

Metal nanoparticles can effectively scatter incident light into a higher refractive index material, like silicon, due to the surface plasmon resonance effect ⁶. They also can be easily formed on the planar silicon cell surface thus offering a light-trapping approach alternative to texturing. For a nanoparticle located at the air-silicon interface the scattered light fraction coupled into silicon exceeds 95% and a large faction of that light is scattered at angles above critical providing nearly ideal light-trapping condition (Animation 2: Plasmons on NP). The resonance can be tuned to the wavelength region, which is most important for a particular cell material and design, by varying the nanoparticle average size, surface coverage and local dielectric environment ^6,7. Theoretical design principles of plasmonic nanoparticle solar cells have been suggested ⁸. In practice, Ag nanoparticle array is an ideal light-trapping partner for poly-Si thin-film solar cells because most of these design principle are naturally met. The simplest way of forming nanoparticles by thermal annealing of a thin precursor Ag film results in a random array with a relatively wide size and shape distribution, which is particularly suitable for light-trapping because such an array has a wide resonance peak, covering the wavelength range of 700-900 nm, important for poly-Si solar cell performance. The nanoparticle array can only be located on the rear poly-Si cell surface thus avoiding destructive interference between incident and scattered light which occurs for front-located nanoparticles ⁹. Moreover, poly-Si thin-film cells do not requires a passivating layer and the flat base-shaped nanoparticles (that naturally result from thermal annealing of a metal film) can be directly placed on silicon further increases plasmonic scattering efficiency due to surface plasmon-polariton resonance ¹⁰.

The cell with the plasmonic nanoparticle array as described above can have a photocurrent about 28% higher than the original cell. However, the array still transmits a significant amount of light which escapes through the rear of the cell and does not contribute into the current. This loss can be mitigated by adding a rear reflector to allow catching transmitted light and re-directing it back to the cell. Providing sufficient distance between the reflector and the nanoparticles (a few hundred nanometers) the reflected light will then experience one more plasmonic scattering event while passing through the nanoparticle array on re-entering the cell and the reflector itself can be made diffuse – both effects further facilitating light scattering and hence light-trapping. Importantly, the Ag nanoparticles have to be encapsulated with an inert and low refractive index dielectric, like MgF₂ or SiO₂, from the rear reflector to avoid mechanical and chemical damage ⁷. Low refractive index for this cladding layer is required to maintain a high coupling fraction into silicon and larger scattering angles, which are ensured by the high optical contrast between the media on both sides of the nanoparticle, silicon and dielectric ⁶. The photocurrent of the plasmonic cell with the diffuse rear reflector can be up to 45% higher than the current of the original cell or up to 25% higher than the current of an equivalent cell with the diffuse reflector only.

Protocol

1. 다결정 실리콘 태양 전지의 제작 (애니메이션 3) 실리콘 필름 증착 ~ 100에서 그것을 베이킹하여 e-빔 증발 도구를 준비 ° C <3E-8 토르의 기본 압력에 도달하기 위해 하룻밤 사이에. 150 ° C 대기 온도 프리셋 샘플 히터. 5×5 cm 2 (또는 10 x10 cm 2) 기판의 borosilicate 유리 (SCHOTT Borofloat33)와 ~ 실리콘 질화물의 80 nm의 (N 2와 SiH 4 혼합 가스?…

Discussion

증발 다결정 실리콘 태양 전지와 광 산란 plasmonic nanoparticles는 가벼운 트래핑을위한 이상적인 파트너입니다. 이러한 세포는 평면이며, 따라서 그들은 거친 표면의 광 산란에 의존 수 없으며 plasmonic nanoparticles 쉽게 질감 표면에 형성 할 수 있습니다. 세포는 광 산란 가장 효과적인 plasmonic위한 최상의 nanoparticle 위치에서 일어나는 직접적으로 노출된 실리콘과 단 하나, 후면 표면 있습니다. 그것이 결…

Materials

Name of the reagent	Company	Catalogue number	Comments
Silver granular	Sigma-Aldrich	303372	99.99%
MgF2, random crystals, optical grade	Sigma-Aldrich	378836	>=99.99%
Dulux one-coat ceiling paint	Dulux		R>90% (500-1100 nm)