Summary

Framställning av Carbon Nanosheets vid rumstemperatur

Published: March 08, 2016
doi:

Summary

We present the synthesis of an amphiphilic hexayne and its use in the preparation of carbon nanosheets at the air-water interface from a self-assembled monolayer of these reactive, carbon-rich molecular precursors.

Abstract

Amphiphilic molecules equipped with a reactive, carbon-rich “oligoyne” segment consisting of conjugated carbon-carbon triple bonds self-assemble into defined aggregates in aqueous media and at the air-water interface. In the aggregated state, the oligoynes can then be carbonized under mild conditions while preserving the morphology and the embedded chemical functionalization. This novel approach provides direct access to functionalized carbon nanomaterials. In this article, we present a synthetic approach that allows us to prepare hexayne carboxylate amphiphiles as carbon-rich siblings of typical fatty acid esters through a series of repeated bromination and Negishi-type cross-coupling reactions. The obtained compounds are designed to self-assemble into monolayers at the air-water interface, and we show how this can be achieved in a Langmuir trough. Thus, compression of the molecules at the air-water interface triggers the film formation and leads to a densely packed layer of the molecules. The complete carbonization of the films at the air-water interface is then accomplished by cross-linking of the hexayne layer at room temperature, using UV irradiation as a mild external stimulus. The changes in the layer during this process can be monitored with the help of infrared reflection-absorption spectroscopy and Brewster angle microscopy. Moreover, a transfer of the carbonized films onto solid substrates by the Langmuir-Blodgett technique has enabled us to prove that they were carbon nanosheets with lateral dimensions on the order of centimeters.

Introduction

Tvådimensionella kol nanostrukturer dra till sig betydande uppmärksamhet på grund av de rapporterade utestående elektriska, termiska, liksom mekaniska egenskaper 1-5. Dessa material förväntas främja den tekniska utvecklingen inom polymerkompositer 6, energilagringsanordningar 7, och molekylär elektronik 8-10. Trots intensiva forskningsinsatser under de senaste åren har dock tillgång till större mängder väldefinierade kol nanomaterial är fortfarande begränsad, vilket försvårar genomförandet av storskaliga i tekniska tillämpningar 11,12.

Carbon nanomaterial är tillgängliga med antingen uppifrån och ner eller underifrånperspektiv. Typiska metoder såsom peeling tekniker 13 eller högenergetiska processer på ytor 14-16 erbjuder möjligheten att erhålla material med en hög grad av strukturell perfektion och mycket bra prestanda. Emellertid isolering och rening av the produkter är fortsatt utmanande och storskalig produktion av definierade nanostrukturerade material är svårt 12. Å andra sidan kan ett underifrånperspektiv användas som förlitar sig på användningen av molekylära prekursorer, deras arrangemang i definierade strukturer, och en efterföljande karbonisering som ger kol nanostrukturer 17-23. I detta fall, prekursorerna själva är mer komplexa och deras framställning kräver ofta flera syntessteg. Dessa metoder kan erbjuda en hög grad av kontroll över de kemiska och fysikaliska egenskaperna hos de resulterande materialen och kan ge en direkt tillgång till skräddarsydda material. Emellertid är omvandling av prekursorerna till kol- nanomaterial vanligen utförs vid temperaturer över 800 ° C, vilket leder till en förlust av den inbäddade kemisk funktionalisering 24-27.

De ovan nämnda begränsningarna har tagits upp i vår grupp med användning av högreaktiva oligoynes att Can omvandlas till kol nanomaterial vid rumstemperatur 28,29. I synnerhet, amfifiler innefattande en hydrofil huvudgrupp och en hexayne segment är åtkomliga genom en sekvens av bromering och palladiummedierad Negishi korskopplingsreaktioner 30,31. Omvandlingen av dessa prekursormolekyler till målstrukturen sker vid eller under rumstemperatur vid bestrålning med UV-ljus. Den höga reaktiviteten hos de oligoyne amfifilerna gör användningen av mjuka mallar, till exempel luft-vattengränsytan eller gränsytor vätska-vätska, möjlig. I tidigare undersökningar har vi framgångsrikt beredda vesiklar från lösningar av hexayne glykosid amfifiler 28. Tvärbindning av dessa vesiklar uppnåddes under milda betingelser genom UV-bestrålning av proverna. Dessutom har vi nyligen beredd självmonterade monolager från hexaynes med metylkarboxylatdelen huvudgrupp och en hydrofob alkyl- svans vid luft-vatten-gränssnitt i en Langmuir tråg. Den tätt packed molekylära prekursorer ades sedan rakt omvandlas till självbärande kol nanosheets vid rumstemperatur genom UV-bestrålning. I besläktade tillvägagångssätt definierade molekylära prekursorer har nyligen använts för framställningen av två-dimensionellt utökade nanosheets vid luft-vatten-gränsytan 32 till 38.

Syftet med detta arbete är att ge en kortfattad, praktisk översikt över den totala syntesen och tillverkningssteg som möjliggör framställning av kol nanosheets från hexayne amfifiler. Fokus ligger på den experimentella tillvägagångssätt och preparativa frågor.

Protocol

Varning: Se till att konsultera relevant material säkerhetsdatablad (SDB) före användning av kemiska föreningar. Några av de kemikalier som används i dessa synteser är akut toxiska och karcinogena. Beredda nanomaterial kan ha ytterligare risker jämfört med deras bulk motsvarighet. Det är absolut nödvändigt att använda alla lämpliga säkerhetsåtgärder när du utför reaktioner (rök huva) och personlig skyddsutrustning (skyddsglasögon, handskar, laboratorierock, fullängds byxor, sluten tå skor). Om ing…

Representative Results

Den 13 C-kärnmagnetisk resonans (NMR) -spektrum av det beredda prekursormolekylen 3 visar de 12 sp -hybridiserade kolatomerna i hexayne segmentet med de motsvarande kemiska förskjutningar av δ = 82-60 ppm (figur 1b). Dessutom är signalerna vid δ = 173 ppm och vid δ = 52 ppm tilldelad till karbonyl och metylkolet av estern, respektive. Signalerna mellan δ = 33-14 ppm tillskrivs de alifatiska kolen i dodecyl återstod. Motsvarand…

Discussion

Den önskade hexayne amfifilen (3) är rakt framställas genom den sekventiella brome 52,53 och Pd-katalyserad töjning 30,31 av alkynen segmentet, följt av en slutlig deprotektionsreaktion av tritylphenyl estern (2) (figur 1a) 29. Den framgångsrika syntesen bekräftas av den 13 C-NMR-spektrum (figur 1b) samt UV-Vis-absorptionsspektrum (Figur 1c) 31,54. Detta visar den enkla naturen genom vilka högre oligoyne hom…

Divulgations

The authors have nothing to disclose.

Acknowledgements

Funding from the European Research Council (ERC Grant 239831) and a Humboldt Fellowship (BS) is gratefully acknowledged.

Materials

Methyllithium lithium bromide complex (2.2M solution in diethylether) Acros 18129-1000 air-sensitive, flammable
Zinc chloride (0.7M solution in THF) Acros 38945-1000 air-sensitive, flammable
1,1'-Bis(diphenylphosphino)ferrocene]
dichloropalladium(II), DCM adduct 
Boron Molecular BM187
N-Bromosuccinimide Acros 10745 light-sensitive
Silver fluoride Fluorochem 002862-10g light-sensitive
n-Butyllithium (2.5M solution in hexanes) Acros 21335-1000 air-sensitive, flammable
Sodium methanolate Acros 17312-0050
Tetrahydrofuran (unstabilized, for HPLC) Fisher Chemicals T/0706/PB17 This solvent was dried as well as degassed using a solvent purification system (Innovative Technology, Inc, Amesbury, MA, USA)
Toluene (for HPLC) Fisher Chemicals T/2306/17 This solvent was dried as well as degassed using a solvent purification system (Innovative Technology, Inc, Amesbury, MA, USA)
Acetonitrile (for HPLC) Fisher Chemicals A/0627/17 This solvent was dried as well as degassed using a solvent purification system (Innovative Technology, Inc, Amesbury, MA, USA)
Dichloromethane (Extra Dry over Molecular Sieve) Acros 34846-0010
Chloroforme (p.a.) VWR International 1.02445.1000
Pentane Reactolab 99050 Purchased as reagent grade and distilled once prior to use
Heptane Reactolab 99733 Purchased as reagent grade and distilled once prior to use
Dichloromethane Reactolab 99375 Purchased as reagent grade and distilled once prior to use
Diethylether Reactolab 99362 Purchased as reagent grade and distilled once prior to use
Geduran silica gel (Si 60, 40-60µm) Merck 1115671000
Langmuir trough R&K, Potsdam
Thermostat  E1 Medingen
Hamilton syringe  Model 1810 RN SYR
Vertex 70 FT-IR spectrometer  Bruker
External air/water reflection unit (XA-511)  Bruker
UV lamp (250 W, Ga-doped metal halide bulb) UV-Light Technology
Brewster angle microscope (BAM1+)  NFT Göttingen
Sapphire substrates Stecher Ceramics
Quantifoil holey carbon TEM grids Electron Microscopy Sciences
Nuclear magnetic resonance spectrometer (Bruker Avance III 400) Bruker
JASCO V-670 UV/Vis spectrometer JASCO
Scanning Electron Microscope (Zeiss Merlin FE-SEM) Zeiss

References

  1. Geim, A. K., Novoselov, K. S. The rise of graphene. Nature Mater. 6 (3), 183-191 (2007).
  2. Lee, C., Wei, X., Kysar, J. W., Hone, J. Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene. Science. 321 (5887), 385-388 (2008).
  3. Lee, J. H., Loya, P. E., Lou, J., Thomas, E. L. Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration. Science. 346 (6213), 1092-1096 (2014).
  4. Castro Neto, A. H., Guinea, F., Peres, N. M. R., Novoselov, K. S., Geim, A. K. The electronic properties of graphene. Rev. Mod. Phys. 81 (1), 109-162 (2009).
  5. Lau, C. N., Bao, W., Velasco, J. Properties of suspended graphene membranes. Mater. Today. 15 (6), 238-245 (2012).
  6. Ramanathan, T., et al. Functionalized graphene sheets for polymer nanocomposites. Nature Nanotechnol. 3 (6), 327-331 (2008).
  7. Fan, Z., Yan, J., Ning, G., Wei, T., Zhi, L., Wei, F. Porous graphene networks as high performance anode materials for lithium ion batteries. Carbon. 60, 558-561 (2013).
  8. Fiori, G., et al. Electronics based on two-dimensional materials. Nature Nanotechnol. 9 (10), 768-779 (2014).
  9. Burghard, M., Klauk, H., Kern, K. Carbon-Based Field-Effect Transistors for Nanoelectronics. Adv. Mater. 21 (25-26), 2586-2600 (2009).
  10. Avouris, P., Chen, Z., Perebeinos, V. Carbon-based electronics. Nature Nanotechnol. 2 (10), 605-615 (2007).
  11. Zurutuza, A., Marinelli, C. Challenges and opportunities in graphene commercialization. Nature Nanotechnol. 9 (10), 730-734 (2014).
  12. Novoselov, K. S., Fal’ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., Kim, K. A roadmap for graphene. Nature. 490 (7419), 192-200 (2013).
  13. Novoselov, K. S., et al. Electric field effect in atomically thin carbon films. Science. 306 (5696), 666-669 (2004).
  14. Li, X., et al. Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils. Science. 324 (5932), 1312-1314 (2009).
  15. Sun, Z., Yan, Z., Yao, J., Beitler, E., Zhu, Y., Tour, J. M. Growth of graphene from solid carbon sources. Nature. 468 (7323), 549-552 (2010).
  16. Lee, J. H., et al. Wafer-scale growth of single-crystal monolayer graphene on reusable hydrogen-terminated germanium. Science. 344 (6181), 286-289 (2014).
  17. Scott, L. T., et al. A rational chemical synthesis of C60. Science. 295 (5559), 1500-1503 (2002).
  18. Hoheisel, T. N., Schrettl, S., Szilluweit, R., Frauenrath, H. Nanostructured Carbonaceous Materials from Molecular Precursors. Angew. Chem. Int. Ed. 49 (37), 6496-6515 (2010).
  19. Schrettl, S., Frauenrath, H. Elements for a Rational Polymer Approach towards Carbon Nanostructures. Angew. Chem. Int. Ed. 51 (27), 6569-6571 (2012).
  20. Müllen, K. Evolution of Graphene Molecules: Structural and Functional Complexity as Driving Forces behind Nanoscience. ACS Nano. 8 (7), 6531-6541 (2014).
  21. Chen, L., Hernandez, Y., Feng, X., Müllen, K. From Nanographene and Graphene Nanoribbons to Graphene Sheets: Chemical Synthesis. Angew. Chem. Int. Ed. 51 (31), 7640-7654 (2012).
  22. Paraknowitsch, J. P., Thomas, A. Functional Carbon Materials From Ionic Liquid Precursors. Macromol. Chem. Phys. 213 (10-11), 1132-1145 (2012).
  23. Titirici, M. M., et al. Sustainable carbon materials. Chem. Soc. Rev. 44 (1), 250-290 (2015).
  24. Angelova, P., et al. A universal scheme to convert aromatic molecular monolayers into functional carbon nanomembranes. ACS Nano. 7 (8), 6489-6497 (2013).
  25. Zhi, L., Wu, J., Li, J., Kolb, U., Müllen, K. Carbonization of Disclike Molecules in Porous Alumina Membranes : Toward Carbon Nanotubes with Controlled Graphene-Layer Orientation. Angew. Chem. Int. Ed. 44 (14), 2120-2123 (2005).
  26. Zhi, L., et al. From Well-Defined Carbon-Rich Precursors to Monodisperse Carbon Particles with Hierarchic Structures. Adv. Mater. 19 (14), 1849-1853 (2007).
  27. Matei, D. G., et al. Functional single-layer graphene sheets from aromatic monolayers. Adv. Mater. 25 (30), 4146-4151 (2013).
  28. Szilluweit, R., et al. Low-temperature preparation of tailored carbon nanostructures in water. Nano Lett. 12 (5), 2573-2578 (2012).
  29. Schrettl, S., et al. Functional carbon nanosheets prepared from hexayne amphiphile monolayers at room temperature. Nature Chem. 6 (6), 468-476 (2014).
  30. Hoheisel, T. N., Frauenrath, H. A Convenient Negishi Protocol for the Synthesis of Glycosylated Oligo(ethynylene)s. Org. Lett. 10 (20), 4525-4528 (2008).
  31. Schrettl, S., et al. Facile synthesis of oligoyne amphiphiles and their rotaxanes. Chem. Sci. 6 (1), 564-574 (2015).
  32. Sakamoto, J., van Heijst, J., Lukin, O., Schlüter, A. D. Two-Dimensional Polymers: Just a Dream of Synthetic Chemists?. Angew. Chem. Int. Ed. 48 (6), 1030-1069 (2009).
  33. Bauer, T., et al. Synthesis of Free-Standing, Monolayered Organometallic Sheets at the Air/Water Interface. Angew. Chem. Int. Ed. 50 (34), 7879-7884 (2011).
  34. Payamyar, P., et al. Synthesis of a Covalent Monolayer Sheet by Photochemical Anthracene Dimerization at the Air/Water Interface and its Mechanical Characterization by AFM Indentation. Adv. Mater. 26 (13), 2052-2058 (2014).
  35. Zheng, Z., et al. Synthesis of Two-Dimensional Analogues of Copolymers by Site-to-Site Transmetalation of Organometallic Monolayer Sheets. J. Am. Chem. Soc. 136 (16), 6103-6110 (2014).
  36. Sakamoto, R., et al. A photofunctional bottom-up bis(dipyrrinato)zinc(II) complex nanosheet. Nature Commun. 6, 6713 (2015).
  37. van Heijst, J., Corda, M., Lukin, O. Compounds bearing multiple photoreactive chalcone units: Synthesis and study towards 2D polymerization in Langmuir monolayers. Polymer. 70, 1-7 (2015).
  38. Murray, D. J., et al. Large area synthesis of a nanoporous two-dimensional polymer at the air/water interface. J. Am. Chem. Soc. 137 (10), 3450-3453 (2015).
  39. Li, J. J., Limberakis, C., Pflum, D. A. . Modern Organic Synthesis in the Laboratory. , (2007).
  40. Chai, C., Armarego, W. L. F. . Purification of Laboratory Chemicals. , (2003).
  41. Hoheisel, T. N., et al. A multistep single-crystal-to-single-crystal bromodiacetylene dimerization. Nature Chem. 5 (4), 327-334 (2013).
  42. Brzozowska, A. M., Duits, M. H. G., Mugele, F. Stability of stearic acid monolayers on Artificial Sea Water. Colloids Surf., A. 407, 38-48 (2012).
  43. Davies, J. T., Rideal, E. K. . Interfacial Phenomena. , (1963).
  44. Mendelsohn, R., Flach, C. R. Infrared Reflection-Absorption Spectrometry of Monolayer Films at the Air-Water Interface. Handbook of Vibrational Spectroscopy. , 1028-1041 (2002).
  45. Mendelsohn, R., Mao, G., Flach, C. R. Infrared reflection-absorption spectroscopy: Principles and applications to lipid-protein interaction in Langmuir films. Biochim. Biophys. Acta Biomembr. 1798 (4), 788-800 (2010).
  46. Hoenig, D., Moebius, D. Direct visualization of monolayers at the air-water interface by Brewster angle microscopy. J. Phys. Chem. 95 (12), 4590-4592 (1991).
  47. Hénon, S., Meunier, J. Microscope at the Brewster angle: Direct observation of first-order phase transitions in monolayers. Rev. Sci. Instrum. 62 (4), 936-939 (1991).
  48. Kirby, K. W., Shanmugasundaram, K., Bojan, V., Ruzyllo, J. Interactions of Sapphire Surfaces with Standard Cleaning Solutions. ECS Trans. 11 (2), 343-349 (2007).
  49. Blodgett, K. B. Films Built by Depositing Successive Monomolecular Layers on a Solid Surface. J. Am. Chem. Soc. 57 (6), 1007-1022 (1935).
  50. Langmuir, I., Schaefer, V. J. Activities of Urease and Pepsin Monolayers. J. Am. Chem. Soc. 60 (6), 1351-1360 (1938).
  51. Mendelsohn, R., Brauner, J. W., Gericke, A. External infrared reflection absorption spectrometry of monolayer films at the air-water interface. Annu. Rev. Phys. Chem. 46 (1), 305-334 (1995).
  52. Hofmeister, H., Annen, K., Laurent, H., Wiechert, R. A Novel Entry to 17a-Bromo- and 17a-Iodoethynyl Steroids. Angew. Chem. Int. Ed. Engl. 23 (9), 727-729 (1984).
  53. Kim, S., Kim, S., Lee, T., Ko, H., Kim, D. A New, Iterative Strategy for the Synthesis of Unsymmetrical Polyynes: Application to the Total Synthesis of 15,16-Dihydrominquartynoic Acid. Org. Lett. 6 (20), 3601-3604 (2004).
  54. Chalifoux, W. A., Tykwinski, R. R. Synthesis of polyynes to model the sp-carbon allotrope carbyne. Nature Chem. 2 (11), 967-971 (2010).
  55. Kaganer, V. M., Möhwald, H., Dutta, P. Structure and phase transitions in Langmuir monolayers. Rev. Mod. Phys. 71 (3), 779-819 (1999).
  56. Eda, G., et al. Blue photoluminescence from chemically derived graphene oxide. Adv. Mater. 22 (4), 505-509 (2010).
  57. Kumar, P. V., Bardhan, N. M., Tongay, S., Wu, J., Belcher, A. M., Grossman, J. C. Scalable enhancement of graphene oxide properties by thermally driven phase transformation. Nature Chem. 6 (2), 151-158 (2014).
  58. Chernick, E. T., Tykwinski, R. R. Carbon-rich nanostructures: the conversion of acetylenes into materials. J. Phys. Org. Chem. 26 (9), 742-749 (2013).
  59. Rondeau-Gagné, S., Morin, J. F. Preparation of carbon nanomaterials from molecular precursors. Chem. Soc. Rev. 43 (1), 85-98 (2014).
check_url/fr/53505?article_type=t

Play Video

Citer Cet Article
Schrettl, S., Schulte, B., Stefaniu, C., Oliveira, J., Brezesinski, G., Frauenrath, H. Preparation of Carbon Nanosheets at Room Temperature. J. Vis. Exp. (109), e53505, doi:10.3791/53505 (2016).

View Video