Summary

Investigación de velocimetría de imágenes de partículas de hemodinámica a través de Aortic Phantom

Published: February 25, 2022
doi:

Summary

El presente protocolo describe las mediciones de velocimetría de imagen de partículas (PIV) realizadas para investigar el flujo sinusal a través de la configuración in vitro de la válvula aórtica transcatéter (TAV). También se determinan los parámetros hemodinámicos basados en la velocidad.

Abstract

Recientemente se han notificado casos de disfunción de la válvula aórtica y accidente cerebrovascular en pacientes con implante de válvula aórtica transcatéter (TAVI). Se ha sospechado trombo en el seno aórtico y neoseno debido a cambios hemodinámicos. Los experimentos in vitro ayudan a investigar las características hemodinámicas en los casos en que una evaluación in vivo resulta ser limitada. Los experimentos in vitro también son más robustos y los parámetros variables se controlan fácilmente. La velocimetría de imagen de partículas (PIV) es un método de velocimetría popular para estudios in vitro . Proporciona un campo de velocidad de alta resolución tal que incluso se observan características de flujo a pequeña escala. El propósito de este estudio es mostrar cómo se utiliza la PIV para investigar el campo de flujo en el seno aórtico después de TAVI. Se describe la configuración in vitro del fantasma aórtico, TAVI para PIV, y el proceso de adquisición de datos y el análisis de flujo posterior al procesamiento. Se derivan los parámetros hemodinámicos, incluida la velocidad, la estasis de flujo, el vórtice, la vorticidad y la residencia de partículas. Los resultados confirman que los experimentos in vitro y la PIV ayudan a investigar las características hemodinámicas en el seno aórtico.

Introduction

La estenosis aórtica es una enfermedad común en los adultos mayores, y es cuando la válvula aórtica no se abre, lo que reduce el flujo sanguíneo. El problema es causado por el engrosamiento o calcificación de la válvula aórtica1. Por lo tanto, es un tratamiento necesario para mejorar el flujo sanguíneo y disminuir la carga en el corazón. Se trata remodelando la válvula aórtica o reemplazándola por una válvula artificial. Este estudio se centra en la implantación de la válvula aórtica transcatéter (TAVI), reemplazando la válvula aórtica que funciona mal por una artificial utilizando un catéter.

TAVI se ha recomendado para pacientes con problemas en cirugía, y la mortalidad también ha sido baja2. Recientemente, se ha informado que el trombo en pacientes después de TAVI causó disfunción valvular y accidente cerebrovascular 3,4. Se sospecha trombo en el seno aórtico y neoseno, siendo su causa probablemente los cambios en la hemodinámica causados por TAVI. Se realiza sin retirar los folíolos nativos; estas valvas pueden alterar el flujo sinusal y elevar el riesgo de trombosis5.

Es difícil determinar cómo se ve afectado el flujo sanguíneo por TAVI y cómo se induce la trombosis en los pacientes. Es deseable dilucidar la relación entre el flujo sanguíneo y la formación de trombos in vivo. Sin embargo, la falta de técnicas prácticas para medir el flujo sanguíneo hace que esto sea problemático. Por otro lado, las técnicas in vitro tienen la ventaja de permitir monitorear los cambios en el flujo sanguíneo al limitar los parámetros que deben investigarse. La configuración in vitro y la velocimetría de imagen de partículas (PIV) se han utilizado para identificar la velocidad en los campos médicos 6,7,8. Por lo tanto, in vitro y PIV son suficientes para determinar los parámetros que se informarán imitando la condición del paciente: la frecuencia cardíaca y la presión, la viscosidad y la geometría de los senos paranasales, y permitiendo controlar estos parámetros.

En este estudio, la configuración in vitro y la PIV se utilizan para investigar el flujo en el seno aórtico después de TAVI. El fantasma aórtico y TAVI para el PIV y el proceso de adquisición de datos y el análisis de flujo posterior al procesamiento se describen en este protocolo. Se derivan varios parámetros hemodinámicos, incluyendo la velocidad, la estasis, el vórtice, la vorticidad y la residencia de partículas. Los resultados demuestran que la configuración in vitro y la PIV ayudan a investigar las características hemodinámicas en el seno aórtico.

Protocol

1. Configuración in vitro Prepare la configuración experimental en una mesa óptica, que incluya una bomba de pistón, un dispositivo de adquisición de datos (DAQ) y una computadora con el software de ingeniería de sistemas requerido y un software de control de motores (consulte la Tabla de materiales) (Figura 1).NOTA: La bomba de pistón ha sido previamente probada y calibrada y consta de un motor, un controlador de motor y un act…

Representative Results

Los campos de velocidad mostraron una estructura de flujo sinusal diferente dependiendo del diámetro de la válvula en la Figura 4. Para TAV (23 mm), la velocidad fue superior a 0,05 m/s entre TAV y STJ desde la sístole temprana hasta la sístole máxima que TAV se abrió utilizando el chorro de reenvío. La alta velocidad se distribuyó en un rango estrecho cerca del stent en la sístole tardía. La velocidad en la diástole fue inferior a 0,025 m/s, y aparecieron dos vórtices con baja v…

Discussion

El flujo sinusal cambió debido a la diferente geometría sinusal después de TAVI. El vórtice se formó por la abertura de la válvula aórtica y la interacción con el chorro delantero de la sístole22. En el estudio de la válvula quirúrgica artificial sin valvas nativas, el vórtice observado en la región sinusal en la sístole fue normal23. Este estudio forma el vórtice presentado en la diástole al reducir el chorro hacia adelante y entrar en el seno. El flujo sin…

Divulgations

The authors have nothing to disclose.

Acknowledgements

Esta investigación fue apoyada por el Programa de Investigación en Ciencias Básicas de la Fundación Nacional de Investigación de Corea, que está financiado por el Ministerio de Educación (NRF-2021R1I1A3040346 y NRF-2020R1A4A1019475). Este estudio también fue apoyado por la Beca de Investigación 2018 (PoINT) de la Universidad Nacional de Kangwon.

Materials

3D Printer Prusa Research Original Prusa i3 MK2; FDM printer
Aluminum bar (square) APSPRO KHP-3030, KHP-6060 Dimension: 30 mm x 30 mm, 60 mm x 60 mm
Bulb pump Skyhope MHL-1
Camera controlling software Phantom PCC 3.4 software The software controll the high speed camera
Check valve HANJU STEEL PIPE Check valve; 1/2 inch (15A)
Digital Aqusition device National Instruments USB-6001
Glycerin ANU Korea It used for making a working fluid
High-speed camera Phantom Phantom VEO 710E-L
Laser Changchun New Industries Optoelectronics Technology MGL-W-532; CW Nd:YAG Laser
Linear actuator THOMSON PC-40; it converts the rotational motion to lenear motion
Macro lens Nikon VR Micro-NIKKOR 105mm, f/1.4
Motor KOLLMORGEN AKM33H-ANCNR-00; DC servo motor
Motor controlling software KOLLMORGEN Kollmorgen software; the software controll the motor driver
Motor driver KOLLMORGEN AKD-B00606-NBAN-0000
Open-source electronic prototypic platform Arduino A000066 Arduino Uno R3. It used for making a external trigger
Optic table SMTECH 1800 (W) x 900 (B) x 800 (H)
Particle Dantec Dynamics 80A6011 Hollow Glass Sphere. Mean diameter:10 µm, Density: 1090 kg/m3
PIVlab PIVlab Open source algorithm based on MATLAB
https://kr.mathworks.com/matlabcentral/fileexchange/27659-pivlab-particle-image-velocimetry-piv-tool-with-gui
Pressure gauge OMEGA PX309-015A5V. Measurement range: 0~15psi
Refractometer ATAGO 2350 R-5000. Hand held refractometer; measurement range: 1.333-1.520
Resistance valve HANJU STEEL PIPE Ball valve; 1/2 inch (15A)
Saline DAI HAN PHARM It is used for making a working fluid and for preserving the TAV
Silicone hose HSW Inner diameter 26mm, Outter diameter 30mm; Inlet length 5m, Outlet length 1.5m
System enginnering software National Instruments LabVIEW software. The software controlls the DAQ.
Transcatheter Aortic Valve, TAV (23 mm) and TAV (26 mm) Edwards Lifesciences SAPIEN3 23mm, SAPIEN3 26mm. It is supported by Seoul Asan Medical
Viscosmeter Brookfiled DVELV; Measurement range: 1-2×109 cp

References

  1. Carabello, B. A., Paulus, W. J. Aortic stenosis. The Lancet. 373 (9667), 956-966 (2009).
  2. Jakobsen, L., et al. Short-and long-term mortality and stroke risk after transcatheter aortic valve implantation. The American Journal of Cardiology. 121 (1), 78-85 (2018).
  3. Koo, H. J., et al. Computed tomography features of cuspal thrombosis and subvalvular tissue ingrowth after transcatheter aortic valve implantation. The American Journal of Cardiology. 125 (4), 597-606 (2020).
  4. Midha, P. A., et al. The fluid mechanics of transcatheter heart valve leaflet thrombosis in the neosinus. Circulation. 136 (17), 1598-1609 (2017).
  5. Abubakar, H., Ahmed, A. S., Subahi, A., Yassin, A. S. Thrombus in the Right Coronary Sinus of Valsalva Originating From the Left Atrial Appendage Causing Embolic Inferior Wall Myocardial Infarction. Journal of Investigative Medicine High Impact Case Reports. 6, 2324709618792023 (2018).
  6. Charonko, J., Karri, S., Schmieg, J., Prabhu, S., Vlachos, P. In vitro, time-resolved PIV comparison of the effect of stent design on wall shear stress. Annals of Biomedical Engineering. 37 (7), 1310-1321 (2009).
  7. Hariharan, P., et al. Inter-laboratory characterization of the velocity field in the FDA blood pump model using particle image velocimetry (PIV). Cardiovascular Engineering and Technology. 9 (4), 623-640 (2018).
  8. Lim, W., Chew, Y., Chew, T., Low, H. Pulsatile flow studies of a porcine bioprosthetic aortic valve in vitro: PIV measurements and shear-induced blood damage. Journal of Biomechanics. 34 (11), 1417-1427 (2001).
  9. Kim, J., Lee, Y., Choi, S., Ha, H. Pulsatile flow pump based on an iterative controlled piston pump actuator as an in-vitro cardiovascular flow model. Medical Engineering & Physics. 77, 118-124 (2020).
  10. Moore, B. L., Dasi, L. P. Coronary flow impacts aortic leaflet mechanics and aortic sinus hemodynamics. Annals of Biomedical Engineering. 43 (9), 2231-2241 (2015).
  11. Evans, B. . Practical 3D printers: The science and art of 3D printing. , (2012).
  12. Yudi, M. B., Sharma, S. K., Tang, G. H., Kini, A. Coronary angiography and percutaneous coronary intervention after transcatheter aortic valve replacement. Journal of the American College of Cardiology. 71 (12), 1360-1378 (2018).
  13. Adrian, R. J., Westerweel, J. . Particle Image Velocimetry. , (2011).
  14. Deen, N. G., et al. On image pre-processing for PIV of single-and two-phase flows over reflecting objects. Experiments in Fluids. 49 (2), 525-530 (2010).
  15. Thielicke, W., Stamhuis, E. PIVlab-towards user-friendly, affordable and accurate digital particle image velocimetry in MATLAB. Journal of Open Research Software. 2 (1), (2014).
  16. Pizer, S. M., et al. Adaptive histogram equalization and its variations. Computer Vision, Graphics, and Image Processing. 39 (3), 355-368 (1987).
  17. Garcia, D. Robust smoothing of gridded data in one and higher dimensions with missing values. Computational Statistics & Data Analysis. 54 (4), 1167-1178 (2010).
  18. Elger, D. F., LeBret, B. A., Crowe, C. T., Roberson, J. A. . Engineering Fluid Mechanics. , (2020).
  19. Raghav, V., Sastry, S., Saikrishnan, N. Experimental assessment of flow fields associated with heart valve prostheses using particle image velocimetry (PIV): recommendations for best practices. Cardiovascular Engineering and Technology. 9 (3), 273-287 (2018).
  20. Ncho, B., Sadri, V., Ortner, J., Kollapaneni, S., Yoganathan, A. In-Vitro Assessment of the Effects of Transcatheter Aortic Valve Leaflet Design on Neo-Sinus Geometry and Flow. Annals of Biomedical Engineering. 49 (3), 1046-1057 (2021).
  21. Graftieaux, L., Michard, M., Grosjean, N. Combining PIV, POD and vortex identification algorithms for the study of unsteady turbulent swirling flows. Measurement Science and Technology. 12 (9), 1422 (2001).
  22. Yap, C. H., Saikrishnan, N., Tamilselvan, G., Yoganathan, A. P. Experimental measurement of dynamic fluid shear stress on the aortic surface of the aortic valve leaflet. Biomechanics and Modeling in Mechanobiology. 11 (1), 171-182 (2012).
  23. Toninato, R., Salmon, J., Susin, F. M., Ducci, A., Burriesci, G. Physiological vortices in the sinuses of Valsalva: an in vitro approach for bio-prosthetic valves. Journal of Biomechanics. 49 (13), 2635-2643 (2016).
  24. Raghav, V., Midha, P., Sharma, R., Babaliaros, V., Yoganathan, A. Transcatheter aortic valve thrombosis: a review of potential mechanisms. Journal of the Royal Society Interface. 18 (184), 20210599 (2021).
  25. Ramanathan, T., Skinner, H. Coronary blood flow. Continuing Education in Anaesthesia, Critical Care & Pain. 5 (2), 61-64 (2005).
  26. Nobach, H., Bodenschatz, E. Limitations of accuracy in PIV due to individual variations of particle image intensities. Experiments in Fluids. 47 (1), 27-38 (2009).
  27. Gülan, U., et al. Performance analysis of the transcatheter aortic valve implantation on blood flow hemodynamics: An optical imaging-based in vitro study. Artificial Organs. 43 (10), 282-293 (2019).
check_url/fr/63492?article_type=t

Play Video

Citer Cet Article
Kang, J., Ha, H. Particle Image Velocimetry Investigation of Hemodynamics via Aortic Phantom. J. Vis. Exp. (180), e63492, doi:10.3791/63492 (2022).

View Video