Journal
/
Ingénierie
/
Micro-masonry for 3D Additive Micromanufacturing
Journal JoVE
Ingénierie
Un abonnement à JoVE est nécessaire pour voir ce contenu.  Connectez-vous ou commencez votre essai gratuit.
Journal JoVE Ingénierie
Micro-masonry for 3D Additive Micromanufacturing

Micro-masonry for 3D Additive Micromanufacturing

DOI:
10.3791/51974-v

•

08:45 min

•

August 01, 2014

•

,
1Mechanical Science and Engineering,University of Illinois at Urbana-Champaign

Chapitres

  • 00:05Titre
  • 02:02Prepare Retrievable Donor Substrate
  • 04:04Printing and Bonding Process
  • 06:09Results: Microscale Structures and Devices Assembled by Micro-masonry
  • 07:48Conclusion

Summary

Traduction automatique

Traduction automatique

This paper introduces a 3D additive micromanufacturing strategy (termed ‘micro-masonry’) for the flexible fabrication of microelectromechanical system (MEMS) structures and devices. This approach involves transfer printing-based assembly of micro/nanoscale materials in conjunction with rapid thermal annealing-enabled material bonding techniques.

Tags

Micro-masonry3D Additive MicromanufacturingTransfer PrintingMicro/nanoscale MaterialsHeterogeneous Material IntegrationFlexible And Stretchable DevicesMEMSSurface Contact AreaMechanical BondingThermal And Electrical Connection

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

check_url/fr/51974?article_type=v

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques
check_url/fr/51974?article_type=v

Scalable Nanohelices for Predictive Studies and Enhanced 3D Visualization
check_url/fr/51974?article_type=v

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis
check_url/fr/51974?article_type=v

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles
check_url/fr/51974?article_type=v

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence
check_url/fr/51974?article_type=v

3D Printing of Biomolecular Models for Research and Pedagogy
check_url/fr/51974?article_type=v

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
check_url/fr/51974?article_type=v

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars
check_url/fr/51974?article_type=v

Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM – T3DP)
check_url/fr/51974?article_type=v

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography

Read Article