Journal
/
Ingénierie
/
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
Journal JoVE
Ingénierie
Un abonnement à JoVE est nécessaire pour voir ce contenu.  Connectez-vous ou commencez votre essai gratuit.
Journal JoVE Ingénierie
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

DOI:
10.3791/56925-v

•

08:29 min

•

August 10, 2018

•

, , ,
1Department of Engineering Physics,McMaster University, 2Department of Physics, Engineering Physics and Astronomy,Queen’s University

Chapitres

  • 00:04Titre
  • 00:44The Chamber Parts and Top Chamber Assembly
  • 03:13Bottom Chamber Assembly
  • 05:22Final Assembly
  • 06:05Current-Voltage Measurements of Individual Pixels on the Device
  • 07:09Results: Current Density Voltage Measurements of a 6 Diode Configuration
  • 07:42Conclusion

Summary

Traduction automatique

Traduction automatique

Here, we present a protocol for the design, manufacture, and use of a simple, versatile 3D-printed and controlled atmospheric chamber for the optical and electrical characterization of air-sensitive organic optoelectronic devices.

Tags

3D PrintingOrganic OptoelectronicsEnvironmental ChamberDevice Degradation TestingRapid PrototypingVersatile DesignCost-effectiveModular ComponentsO-ringRetaining RingThreaded InsertsOrganic Device Testing

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

check_url/fr/56925?article_type=v

Controlling the Size, Shape and Stability of Supramolecular Polymers in Water
check_url/fr/56925?article_type=v

Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator
check_url/fr/56925?article_type=v

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence
check_url/fr/56925?article_type=v

Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System
check_url/fr/56925?article_type=v

Scanning Light Scattering Profiler (SLPS) Based Methodology to Quantitatively Evaluate Forward and Backward Light Scattering from Intraocular Lenses
check_url/fr/56925?article_type=v

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography
check_url/fr/56925?article_type=v

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light
check_url/fr/56925?article_type=v

Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes
check_url/fr/56925?article_type=v

A Standard and Reliable Method to Fabricate Two-Dimensional Nanoelectronics
check_url/fr/56925?article_type=v

Method Development for Contactless Resonant Cavity Dielectric Spectroscopic Studies of Cellulosic Paper

Read Article