Journal
/
Ingénierie
/
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars
Journal JoVE
Ingénierie
This content is Free Access.
Journal JoVE Ingénierie
A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

A Soft Tooling Process Chain for Injection Molding of a 3D Component with Micro Pillars

DOI:
10.3791/57335-v

•

05:32 min

•

August 04, 2018

•

, , , , ,
1Department of Mechanical Engineering,Technical University of Denmark

Chapitres

  • 00:04Titre
  • 00:42Fabrication of an Insert by Additive Manufacturing
  • 02:35Injection Molding and Quality Assessment
  • 03:50Results: The Replication of Micro Pillars using a Mold Fabricated with Additive Manufacturing
  • 05:03Conclusion

Summary

Traduction automatique

Traduction automatique

A protocol for fabricating injection molding inserts for complex geometry with micro features on surfaces employing Additive Manufacturing (AM) is presented.

Tags

Keywords: 3D ComponentMicro PillarsInjection MoldingSoft Tooling ProcessAdditive ManufacturingComputer-aided DesignPhotopolymerizationLaser Scanning Digital MicroscopeInjection Molding MachinePolyethylene GranulesMelt TemperaturePacking Pressure

Article

Embed

AJOUTER À LA PLAYLIST

Usage Statistics

Vidéos Connexes

check_url/fr/57335?article_type=v

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures
check_url/fr/57335?article_type=v

Micro 3D Printing Using a Digital Projector and its Application in the Study of Soft Materials Mechanics
check_url/fr/57335?article_type=v

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component
check_url/fr/57335?article_type=v

Micro-masonry for 3D Additive Micromanufacturing
check_url/fr/57335?article_type=v

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles
check_url/fr/57335?article_type=v

Fabrication Process of Silicone-based Dielectric Elastomer Actuators
check_url/fr/57335?article_type=v

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5
check_url/fr/57335?article_type=v

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes
check_url/fr/57335?article_type=v

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
check_url/fr/57335?article_type=v

Combining Microfluidics and Microrheology to Determine Rheological Properties of Soft Matter during Repeated Phase Transitions

Read Article