Summary

Analysis of Mitochondrial Respiratory Chain Complexes in Cultured Human Cells using Blue Native Polyacrylamide Gel Electrophoresis and Immunoblotting

Published: February 12, 2019
doi:

Summary

This protocol demonstrates the analysis of mitochondrial respiratory chain complexes by blue native polyacrylamide gel electrophoresis. Here the method applied to cultured human cells is described.

Abstract

Mitochondrial respiration is performed by oxidative phosphorylation (OXPHOS) complexes within mitochondria. Internal and environmental factors can perturb the assembly and stability of OXPHOS complexes. This protocol describes the analysis of mitochondrial respiratory chain complexes by blue native polyacrylamide gel electrophoresis (BN-PAGE) in application to cultured human cells. First, mitochondria are extracted from the cells using digitonin, then using lauryl maltoside, the intact OXPHOS complexes are isolated from the mitochondrial membranes. The OXPHOS complexes are then resolved by gradient gel electrophoresis in the presence of the negatively charged dye, Coomassie blue, which prevents protein aggregation and ensures electrophoretic mobility of protein complexes towards the cathode. Finally, the OXPHOS complexes are detected by standard immunoblotting. Thus, BN-PAGE is a convenient and inexpensive technique that can be used to evaluate the assembly of entire OXPHOS complexes, in contrast to the basic SDS-PAGE allowing the study of only individual OXPHOS complex subunits.

Introduction

Mitochondria are multifunctional organelles playing an important role in energy production, regulation of cellular metabolism, signaling, apoptosis, aging, etc.1,2,3. The energy production in mitochondria relies on the oxidative phosphorylation function that couples respiration with ATP synthesis. In human cells, the mitochondrial oxidative phosphorylation system (OXPHOS) is composed of five complexes. Complexes I-IV create an electrochemical proton gradient in the mitochondrial intermembrane space that is used by complex V to produce ATP. Each OXPHOS complex is multimeric and, except complex II, composed of the subunits encoded by both nuclear and mitochondrial genes. Any defects in the core components of the OXPHOS complexes caused by mutations or environmental stress can perturb the assembly and functionality of the oxidative phosphorylation system. In addition, the proper assembly of functional OXPHOS complexes requires a large number of assembly factors4,5,6

Blue native polyacrylamide gel electrophoresis (BN-PAGE) is a fundamental technique enabling analysis of intact protein complexes and can be used to study the assembly of OXPHOS complexes. First, mitochondria are isolated from the cells by digitonin, which is a mild detergent that permeabilizes the plasma membrane of the cells. Then, by using lauryl maltoside, OXPHOS complexes are released from the mitochondrial membranes. By using gradient gel electrophoresis, the OXPHOS complexes are separated according to their mass. Coomassie blue G-250 (not R-250) added to the sample buffer and the blue cathode buffer dissociates detergent-labile associations but preserves individual respiratory chain complexes intact8. During the electrophoresis, the blue cathode buffer containing dye is replaced by the cathode buffer without dye, which ensures efficient transfer of OXPHOS complexes to the PVDF membrane8. To visualize OXPHOS complexes, the PVDF membrane is sequentially incubated with antibodies corresponding to the selected subunits of the five OXPHOS complexes.

The method described here with some modifications can be applied to any cultured cells. In addition, this method can be used for analysis of OXPHOS complexes in mitochondria isolated from tissue samples9. BN-PAGE requires at least 5-10 µg of mitochondria for each sample per run. Using the method described here, 500,000 cultured cells such as HEK293, SH-SY5Y or 143B cells can yield approximately 10 µg of mitochondria. However, a sufficient amount of the cells for the BN analysis depends on the specific cell type.

The most common method to study mitochondrial OXPHOS proteins is SDS-PAGE and western blotting. However, SDS-PAGE allows studying only individual OXPHOS subunits and, in contrast to BN-PAGE, cannot be used to evaluate the assembly of entire OXPHOS complexes. Clear native-PAGE separates protein complexes in native conditions without the presence of negatively charged dye and has a significantly lower resolution compared to BN-PAGE. However, clear native-PAGE is milder than BN-PAGE so it can retain labile supramolecular assemblies of protein complexes such as OXPHOS supercomplexes that are dissociated under the BN-PAGE conditions10. In this protocol, the gradient gel is used to separate complexes; however, alternatively, non-gradient separation can be used if the relatively expensive gradient maker is not available11

Important, the method described here allows analyzing the assembly of OXPHOS complexes, while the functionality of the complexes is not assessed. A high-resolution BN-PAGE followed by in-gel activity assay11 as well as spectrophotometric enzymatic activity assay of the mitochondrial complexes12 are efficient techniques for the functional analysis of the OXPHOS complexes. However, both of these methods do not assay the assembly of OXPHOS complexes.

Thus, BN-PAGE is the optimal method to investigate the assembly of individual OXPHOS complexes. For example, some mitochondrial disorders, such as Leber hereditary optic neuropathy (LHON), mitochondrial encephalopathy with lactic acidosis and stroke-like episodes (MELAS), are associated with altered assembly of one or more components of the OXPHOS system5. By using the BN-PAGE method described here, the molecular mechanisms of mitochondrial diseases can be studied. 

Protocol

spaNOTE: This protocol is based on an associated publication by Hilander et al.13 .

1. Preparation of buffers and solutions

NOTE: All the buffers and solutions used in the protocol are summarized in Table 1. The given volumes of the buffers are sufficient to prepare and run 10 samples. All the buffers can be stored at +4 °C for up to one year. 

  1. Prepare 20 mL of 3x gel buffer containing 1.5 M aminocaproic acid, 150 mM Bis-tris in distilled water (dH2O). Adjust pH to 7.0.
  2. Prepare 10 mL of 2 M aminocaproic acid in dH2O.
  3. Prepare 1 mL of the mitochondrial buffer by combining the following: 0.5 mL of 3x gel buffer, 0.5 mL of 2 M aminocaproic acid and 4 µL of 500 mM EDTA.
  4. Prepare 1,000 mL of cathode buffer containing 15 mM of Bis-tris and 50 mM of tricine in dH2O. Adjust pH to 7.0.
    1. Prepare 200 mL of blue cathode buffer by adding 0.04 g of Coomassie blue G-250 to 200 mL of cathode buffer.
  5. Prepare 1,000 mL of anode buffer containing 50 mM Bis-tris in dH2O. Adjust pH to 7.0.
  6. Prepare 2.5 mL of sample buffer containing 750 mM aminocaproic acid and 5% Coomassie blue G-250 in dH2O.

2. Preparation of mitochondrial lysates

  1. Plate the cells the day before the collection. For HEK293 or 143B cells, use Dulbecco’s modified Eagle’s medium (DMEM) with 10% fetal bovine serum, 1% L-glutamine, 100 mg/mL penicillin and 100 mg/mL streptomycin. Grow the cells in a cell culture incubator at +37 °C in a 5% CO2 humidified atmosphere. Ensure that there are at least 500,000 cells for each sample on the day of collection.
  2. Gently wash the cells once with ice-cold PBS. Avoid detaching the cells from the plate. Scrape the cells and pellet them at 800 x g for 10 min at +4 °C. 
  3. Wash the cell pellet twice with ice-cold PBS, and centrifuge as in step 2.2. Measure the protein concentration with the Bradford method using a commercial kit. Pellet the cells at 800 x g for 10 min at +4 °C.
    NOTE: After the cell collection, perform all steps at +4 °C and do not vortex. 
  4. Prepare 20 mL of PBS with protease inhibitor by adding 200 µL of 100x protease inhibitor to 20 mL of PBS. Keep on ice. Resuspend the cells in PBS with protease inhibitor to a final protein concentration of 5 mg/mL.
    1. To calculate the volume of PBS with protease inhibitor needed to resuspend the cells at 5 mg/mL, calculate the protein amount in each sample. For this calculation, use the protein concentration measured in step 2.3 and the volume of PBS used to resuspend the cells after washing in step 2.3.
  5. Prepare 1 mL of 3.3 mM digitonin in PBS with protease inhibitor. Add 3.3 mM digitonin to a final concentration of 1.65 mM. Mix well and incubate on ice for 5 min. 
    1. To prepare 1 mL of 3.3 mM digitonin in PBS with protease inhibitor, dissolve 4 mg of digitonin in 1 mL of PBS at 100 °C until no precipitate is visible and cool on ice immediately. Add 10 µL of 100x protease inhibitor to 1 mL of digitonin solution.
      NOTE: Use only a fresh solution of digitonin.
      CAUTION: Digitonin is toxic! Use a face mask, gloves and a lab coat.
  6. Add PBS with proteinase inhibitor (prepared in step 2.4) to the final volume of 1.5 mL. Centrifuge at 10,000 x g for 10 min at +4 °C. Remove the supernatant. In this step, mitochondria are pelleted. 
  7. Resuspend the mitochondrial pellet in mitochondrial buffer. The volume of mitochondrial buffer is half of the volume of PBS in step 2.4.
  8. Prepare fresh 10% lauryl maltoside in PBS containing protease inhibitor (prepared in step 2.4). 1 mL is sufficient for 10 samples. Add 10% lauryl maltoside to the final concentration of 1%. Incubate on ice for 15 min (this step can be longer up to a couple of hours).
  9. Centrifuge at 20,000 x g for 20 min at +4 °C. Collect the supernatant into a new tube. Measure the protein concentration by the Bradford method using a kit. Add sample buffer, a volume that is half of the volume of lauryl maltoside used in step 2.8. Samples can be stored at -80 °C for up to 6 months.

3. Preparation of gradient gel for BN-PAGE

  1. Pour the gradient gel for BN-PAGE at room temperature. Place the gradient maker on a stir plate and connect it with flexible tubing to the peristaltic pump. Attach an infusion set with the needle to the tubing. Place a magnetic stirrer into the proximal chamber of the gradient maker. Wash the tubing with dH2O at maximum pump speed for 10 min.
  2. Empty the tubing and the gradient maker. Use a pipet to remove any leftover dH2O in the channel between chambers of the gradient maker. Close the channel and tubing with the valve.
  3. Using casting frame and clamps assemble two glass plates in the holder, which has a hole on the bottom, and place it on the stand. Make sure that it is more or less on a straight surface with a water balance. Place the needle connected to the tubing between the glass plates. 
  4. Prepare 6% and 15% gel solutions (Table 2). Keep on ice. Add ammonium persulphate (APS) and tetramethylenediamine (TEMED) (they start polymerization) last. Mix gently to avoid making air bubbles.
  5. Load the proximal end of the gradient-gel-mixer tubing chamber with 6% gel and the distal end with 15% gel. The total volume of the gel should be equal to the volume of the separating gel between the glass plates. Thus, use 2.6 mL of 6% gel and 2.1 mL of 15% gel to the gradient gel mixer for one 8.3 cm x 7.3 cm sized gel.
  6. Switch on the magnetic stirrer, and open the tubing and channel between chambers of the gradient maker. Immediately switch on the peristaltic pump to 5 mL/min. Fill the glass plates, and do not allow bubbles to enter the gel. Remove the needle when there is no gel in the tubing.
  7. Gently overlay the gel with dH2O. Keep the gel at room temperature for at least 1 h for polymerization.
  8. Immediately after pouring the gel, wash the tubing by filling the gradient chambers with dH2O and using the peristaltic pump at maximal speed. When preparing two and more gels, always clean the system in between.
  9. Prepare 1x gel buffer by mixing 3 mL of 3x gel buffer and add 6 mL of dH2O. Remove dH2O from the surface of the gel with filter paper gently. Wash the surface of the gel with 1x gel buffer. Remove 1x gel buffer with filter paper gently.
    1. Avoid fibers from the filter paper on the gel. To ensure this, cut the paper to small pieces with scissors, but do not tear the paper.
  10. Place the comb between the glass plates, but do not immerse it fully to be able to pour the stacking gel under the comb. Prepare the 4% stacking gel (Table 2). Add APS and TEMED last as they start polymerization easily. Mix gently avoiding air bubbles.
  11. Overlay the stacking gel, avoiding bubbles under the comb, and immerse the comb fully. Let the stacking gel polymerize for at least 30 min. Remove the comb and wash the wells with 1x gel buffer using a pipet.
    1. After polymerization, the gel can be stored at +4 °C for a couple of days. To store the gel, wrap the gel in paper soaked with dH2O and plastic film to prevent drying of the gel.

4. Blue native gel electrophoresis

NOTE: To prevent degradation of OXPHOS complexes run electrophoresis at +4 °C. Use pre-chilled buffers. 

  1. Load the gel cassette with the blue cathode buffer until the bottom of the wells. Loading of the samples is easier when the cassette is not filled to the top. Wash the wells with the blue cathode buffer and then fill the wells with the blue cathode buffer using pipet.
  2. Load the samples (5-30 µg of protein) into wells. Gently fill the gel cassette to the top with the blue cathode buffer and the tank with anode buffer.
  3. Run the gel for 15 min at a constant voltage of 40 V. Then increase the voltage to 80 V (or use a constant current of 6 mA), do not exceed 10 mA. Run the gel until the dye reaches 2/3 of the gel length.
  4. Replace the blue cathode buffer with cathode buffer and continue electrophoresis until the dye front has run out. In total, electrophoresis takes about 3 hours.
  5. Retrieve the glass plates and transfer the proteins to the polyvinylidene fluoride (PVDF) membrane by semi-dry blotting. Use a constant voltage of 25 V and a current limited to 1.0 A for 30 min.
    1. Alternatively, use wet blotting to transfer the OXPHOS complexes to a PVDF membrane. 
  6. Continue with blocking of the membrane and antibody incubation according to the standard immunoblotting protocol. Use the primary antibodies against subunits of OXPHOS complexes sequentially. 
    NOTE: For example, use anti-NDUFA9 antibody (1:2000) for complex I, anti-SDHA antibody (1:2000) for complex II, anti-UQCRC2 antibody (1:1000) for complex III, anti-COX1 antibody (1:2000) for complex IV and anti-ATP5A antibody (1:2000) for complex V. The list of the antibodies is presented in the Table of Materials.

Representative Results

Using BN-PAGE, defects in the assembly of mitochondrial OXPHOS complexes can be investigated. Figure 1A shows the assembly of respiratory chain complexes in human neuroblastoma cells (SH-SY5Y) treated with chloramphenicol, which specifically inhibits translation of mtDNA-encoded OXPHOS subunits. Chloramphenicol depleted the OXPHOS complexes that contained mitochondrially-encoded subunits (complex I, III, IV; Figure 1A), while complex II, which is exclusively encoded by nuclear genes, was compensatorily upregulated. Complex V was not immunoblotted here.

Multiple freeze-thaw cycles destroy OXPHOS complexes. Figure 1B demonstrates the degradation of OXPHOS complexes by the freeze-thaw cycles. Mitochondrial respiratory complexes in sample 3 that have undergone multiple freeze-thaw cycles have a lower band intensity and are shifted in comparison to the same samples, which were frozen only once. An uncropped western blot image of Figure 1B is shown in Supplementary Figure 1.

The quality of the gel is important for sharp and clear bands. Figure 1C shows an immunoblot from a gel that did not polymerize well. Stripping of the membrane also can affect the detection of OXPHOS complexes. In Figure 1D, complex I was detected before or after stripping. The signal to noise ratio is much lower after stripping.

Figure 1
Figure 1. BN-PAGE immunoblots from successful and sub-optimal experiments. (A) Depletion of OXPHOS complexes by inhibitor of mitochondrial translation. Human neuroblastoma cells (SH-SY5Y) were treated with chloramphenicol (CAP) for 48 hours. CTRL, control cells without chloramphenicol treatment. The lower panel shows the quantification of the immunoblot. The value of the control is taken as 1 (shown as a dashed line). Data are presented as mean ± SD, n = 3, *P < 0.0001 as compared to control using unpaired Student’s t-tests. (B) Disruption of OXPHOS complexes by multiple freeze-thaw cycles. Samples 1-3 were prepared from human osteosarcoma cells (143B) in the same conditions. Samples number 1 and 2 were frozen and melted only once, while the sample number 3 underwent four freeze-thaw cycles. (C) BN-PAGE immunoblots of OXPHOS complexes isolated from HEK293 cells. The smearing of the bands is caused by low quality of the gel. (D) Effect of stripping on the detection of OXPHOS complexes. Detection of Complex I in human neuroblastoma cells (SH-SY5Y) before and after stripping of the same membrane. OXPHOS complexes were detected using anti-NDUFA9 antibody (complex I), anti-SDHA antibody (complex II), anti-UQCRC2 antibody (complex III) and anti-COX1 antibody (complex IV). Please click here to view a larger version of this figure.

Buffer or solution Composition Recipe
3 x gel buffer 1.5 M aminocaproic acid 3.94 g of aminocaproic acid
150 mM Bis-tris 0.63 g of Bis-tris
dH2O Add dH2O to 20 mL
pH 7.0 Adjust pH to 7.0
Cathode buffer 15 mM Bis-tris 3.14 g of Bis-tris
50 mM tricine 8.96 g of tricine
dH2O Add dH2O to 1000 mL
pH 7.0 Adjust pH to 7.0
Blue cathode buffer 0.02% coomassie blue G 0.04 g of Serva blue G
15 mM Bis-tris 200 mL of Cathode buffer
50 mM tricine
dH2O
pH 7.0
Anode buffer 50 mM Bis-tris 20.93 g
dH2O Add dH2O to 2000 mL
pH 7.0 Adjust pH to 7.0
Mitochondrial buffer 1.75 M aminocaproic acid 0.5 mL of 3 x gel buffer
75 mM Bis-tris 0.5 mL of 2 M aminocaproic acid
2 mM EDTA 4 µL of 500 mM EDTA
dH2O  -
pH 7.0  -
Sample buffer 750 mM aminocaproic acid 0.94 mL of 2 M aminocaproic acid
5% comassie blue G 0.125 g of Serva blue G
dH2O Add dH2O to 2.5 mL
2M aminocaproic acid 2 M aminocaproic acid 2.62 g of aminocaproic acid
dH2O Add dH2O to 10 mL

Table 1. Buffers and solutions used for BN-PAGE.

Blue native gels Separating 6% gel Separating 15% gel Stacking 4% gel
3 x gel buffer 3.3 mL  3.3 mL 1.64 mL
40% Acrylamide/Bis 37.5:1 1.5 mL 3.75 mL 0.5 mL
dH2O 5.14 mL 0.93 mL 2.77 mL
Glycerol 0 2 mL 0
10% Ammonium persulfate* 60 µL 10 µL  60 µL
TEMED 4 µL 2 µL 6 µL
Total volume 10 mL 10 mL 5 mL
*Make always fresh 10% ammonium persulfate in dH2O

Table 2. Recipes of gel for BN-PAGE.

Supplementary Figure 1. Uncropped western blot image of Figure 1B. Please click here to download this figure.

Discussion

One of the most critical parts of the protocol is to preserve intact OXPHOS complexes during sample preparation, storage and gel electrophoresis. Thus, mitochondria should be isolated at +4 °C and the samples should not undergo freeze-thaw cycles. OXPHOS complexes can only tolerate one freeze-thaw cycle during the whole procedure. Multiple freeze-thaw cycles destroy OXPHOS complexes (Figure 1B). Control and experimental samples that are to be compared should be prepared in parallel to avoid any differences in storage conditions, which might give misleading results. If it is not possible to perform all the steps of the protocol in parallel with all the samples, we recommend to freeze washed cell pellets at -80 °C (step 1.4 in this protocol) and later carry out the rest of the protocol for all the samples together at least until gel electrophoresis. Special attention should be paid to the cleanliness of the electrophoresis apparatus (tank, cassette). If the same apparatus is used for SDS-PAGE, wash it very well before BN-PAGE. Any residual SDS can cause dissociation of the OXPHOS complexes during electrophoresis.

High-quality gradient gels are another critical part of the protocol. Precast gels for blue native PAGE are commercially available; however, it is not recommended to use them, since the buffers used for commercial gels might have a composition, which is different from the sample buffers. The gradient of the gel used here (6-15%) is optimal for separation of individual OXPHOS complexes. To detect higher-order supramolecular structures of OXPHOS, also known as respiratory chain supercomplexes14, some optimization is required11.

For the visualization of OXPHOS complexes use the specific antibodies sequentially, based on their properties. For example, use first the antibody that gives the weakest signal and the antibody with the strongest signal last. This is important since the stripping weakens the detection (Figure 1D). The composition of respiratory chain complexes can be investigated if after BN-PAGE the gel is subjected to the second dimension SDS-PAGE15.

The protocol described here suggests using antibodies against individual OXPHOS complexes sequentially. However, the commercially available OXPHOS antibody cocktail can be used to detect all five OXPHOS complexes simultaneously. Nevertheless, to be able to detect incompletely assembled OXPHOS complexes and define their identity, antibodies against individual OXPHOS complexes should be used sequentially. This step is time-consuming; however, it can be essential for testing new experimental conditions and models. 

The concentration of digitonin used for mitochondrial isolation should be optimized for the specific cell type. As a detergent, digitonin permeabilizes cell membranes. The optimal concentration of digitonin efficiently permeabilizes the plasma membrane of the cells leaving the mitochondrial membranes intact. Too low concentration of digitonin causes high contamination of the mitochondrial extracts while too high concentration damages the mitochondrial membranes and reduces the total mitochondrial yield. The optimal digitonin/protein ratio (g/g) varies from 0.3 to 1. Western blot analysis of proteins extracted from pellets and supernatants can be used to test the optimal concentration of digitonin16.

This protocol does not include protein loading control on the immunoblot; therefore, the protein concentration of extracted complexes should be carefully measured at least in triplicates to ensure equal loading. In addition, the samples can be run in BN-PAGE in replicates. If the assembly of selective OXPHOS complexes is impaired, unaffected complexes can serve as loading controls.

The estimation of the molecular mass of the protein complexes in the BN-PAGE is challenging18. The current protocol does not include the molecular weight marker; therefore, to estimate the assembly of the OXPHOS complexes, the control samples containing unaffected complexes should always be included in the analysis. The control samples for BN-PAGE are usually untreated or wild type cells. 

The method presented here is optimized for the detection of mitochondrial respiratory chain complexes; however, it can also be applied for the evaluation of oligomerization of mitochondrial proteins19. In addition, the assembly rate of OXPHOS complexes can be studied by first depleting mitochondrial-encoded subunit containing complexes by chloramphenicol and then following their recovery after removal of chloramphenicol10. Thus, BN-PAGE can be used to evaluate steady-state levels and assembly of OXPHOS for different applications including molecular diagnostics of human mitochondrial disorders9,11.

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

Helsinki University Library is thanked for the financial support in publishing.

Materials

100 mm cell plates Thermo Fisher Scientific 130182
40% Acrylamide/Bis 37.5:1 Bio-Rad 161-0148
Aminocaproic acid Sigma A2504
Ammonium persulfate Sigma A3678
Anti-ATP5A Abcam 14748 Complex V subunit
Anti-MTCOI Abcam 14705 Complex VI subunit
Anti-NDUFA9 Abcam 14713 Complex I subunit
Anti-SDHA Abcam 14715 Complex II subunit
Anti-UQCRC2 Abcam 14745 Complex III subunit
Bis-tris Sigma B7535
Bradford protein assay kit BioRad 5000006
Cell scrapers Fisher 11597692
Coomassie blue G250 (Serva Blue G) Serva 35050
Digitonin Sigma D141
DMEM Lonza 12-614F/12
EDTA Life Technologies 15575-038
FBS Life Technologies 10270106
Fetal bovine serum Life Technologies 10270106
Glycerol (Sigma G5516
Gradient maker Bio-Rad 1654120
Lauryl maltoside (n-Dodecyl β-D-maltoside) Sigma D4641
L-glutamine Life Technologies 25030024
L-glutamine Gibco 25030
N,N,N′,N′-Tetramethylethylenediamine (TEMED) Sigma T9281
PBS Life Technologies BE17-516F
Penicillin/Streptomycin Lonza 17-602E
Penicillin/streptomycin Gibco 15140
Power supply GE Healthcare  EPS 301
Protease inhibitors Thermo Scientific 10137963
Trans-blot turbo mini PVDF BioRad 1704156
Tricine Sigma T9784
Trypsin-EDTA Gibco 15400054
Vertical electrophoresis apparatus BioRad 1658004

Riferimenti

  1. Osellame, L. D., Blacker, T. S., Duchen, M. R. Cellular and molecular mechanisms of mitochondrial function. Best Practice, Research. Clinical Endocrinology & Metabolism. 26 (6), 711-723 (2012).
  2. Jang, J. Y., Blum, A., Liu, J., Finkel, T. The role of mitochondria in aging. The Journal of Clinical Investigation. 128 (9), 3662-3670 (2018).
  3. Nunnari, J., Suomalainen, A. Mitochondria: in sickness and in health. Cell. 148 (6), 1145-1159 (2012).
  4. Cogliati, S., Lorenzi, I., Rigoni, G., Caicci, F., Soriano, M. E. Regulation of Mitochondrial Electron Transport Chain Assembly. Journal of Molecular Biology. , (2018).
  5. Fernandez-Vizarra, E., Tiranti, V., Zeviani, M. Assembly of the oxidative phosphorylation system in humans: what we have learned by studying its defects. Biochimica et Biophysica Acta. 1793 (1), 200-211 (2009).
  6. Signes, A., Fernandez-Vizarra, E. Assembly of mammalian oxidative phosphorylation complexes I-V and supercomplexes. Essays in Biochemistry. 62 (3), 255-270 (2018).
  7. Schagger, H., von Jagow, G. Blue native electrophoresis for isolation of membrane protein complexes in enzymatically active form. Analytical Biochemistry. 199 (2), 223-231 (1991).
  8. Wittig, I., Braun, H. P., Schagger, H. Blue native PAGE. Nature Protocols. 1 (1), 418-428 (2006).
  9. Gotz, A., et al. Exome sequencing identifies mitochondrial alanyl-tRNA synthetase mutations in infantile mitochondrial cardiomyopathy. American Journal of Human Genetics. 88 (5), 635-642 (2011).
  10. Wittig, I., Schagger, H. Advantages and limitations of clear-native PAGE. Proteomics. 5 (17), 4338-4346 (2005).
  11. Luo, X., Wu, J., Jin, Z., Yan, L. J. Non-Gradient Blue Native Polyacrylamide Gel Electrophoresis. Current Protocols in Protein Science. 87, 19.29.1-19.29.12 (2017).
  12. Jha, P., Wang, X., Auwerx, J. Analysis of Mitochondrial Respiratory Chain Supercomplexes Using Blue Native Polyacrylamide Gel Electrophoresis (BN-PAGE). Current Protocols in Mouse Biology. 6 (1), 1-14 (2016).
  13. Preston, C. .. C., et al. Aging-induced alterations in gene transcripts and functional activity of mitochondrial oxidative phosphorylation complexes in the heart. Mechanisms of Ageing and Development. 129 (6), 304-312 (2008).
  14. Hilander, T., Konovalova, S., Terzioglu, M., Tyynismaa, H. Analysis of Mitochondrial Protein Synthesis: De Novo Translation, Steady-State Levels, and Assembled OXPHOS Complexes. Current Protocols In Toxicology. , e56 (2018).
  15. Lobo-Jarne, T., Ugalde, C. Respiratory chain supercomplexes: Structures, function and biogenesis. Seminars in Cell & Developmental Biology. 76, 179-190 (2018).
  16. Fiala, G., Schamel, W. W., Blumenthal, B. Blue native polyacrylamide gel electrophoresis (BN-PAGE) for analysis of multiprotein complexes from cellular lysates. Journal of Visualized Experiments. (48), (2011).
  17. Itahana, K., Clegg, H. V., Zhang, Y. ARF in the mitochondria: the last frontier?. Cell Cycle (Georgetown, Tex). 7 (23), 3641-3646 (2008).
  18. Wittig, I., Beckhaus, T., Wumaier, Z., Karas, M., Schagger, H. Mass estimation of native proteins by blue native electrophoresis: principles and practical hints. Molecular & Cellular Proteomics. 9 (10), (2010).
  19. Konovalova, S., et al. Redox regulation of GRPEL2 nucleotide exchange factor for mitochondrial HSP70 chaperone. Redox Biology. 19, 37-45 (2018).
  20. Konovalova, S., et al. Exposure to arginine analog canavanine induces aberrant mitochondrial translation products, mitoribosome stalling, and instability of the mitochondrial proteome. The International Journal of Biochemistry & Cell Biology. 65, 268-274 (2015).
  21. Ahmed, S. T., et al. Using a quantitative quadruple immunofluorescent assay to diagnose isolated mitochondrial Complex I deficiency. Scientific Reports. 7 (1), (2017).

Play Video

Citazione di questo articolo
Konovalova, S. Analysis of Mitochondrial Respiratory Chain Complexes in Cultured Human Cells using Blue Native Polyacrylamide Gel Electrophoresis and Immunoblotting. J. Vis. Exp. (144), e59269, doi:10.3791/59269 (2019).

View Video