Summary

Sintesi di derivati ​​antivirale Tetrahydrocarbazole da fotochimica e acido-catalizzata CH funzionalizzazione via intermedi perossidi (CHIPS)

Published: June 20, 2014
doi:

Summary

A two-step procedure for the synthesis of pharmaceutically active indole-derivatives by C-H functionalization with anilines is described, using photo- and Brønsted acid catalysis.

Abstract

The direct functionalization of C-H bonds is an important and long standing goal in organic chemistry. Such transformations can be very powerful in order to streamline synthesis by saving steps, time and material compared to conventional methods that require the introduction and removal of activating or directing groups. Therefore, the functionalization of C-H bonds is also attractive for green chemistry. Under oxidative conditions, two C-H bonds or one C-H and one heteroatom-H bond can be transformed to C-C and C-heteroatom bonds, respectively. Often these oxidative coupling reactions require synthetic oxidants, expensive catalysts or high temperatures. Here, we describe a two-step procedure to functionalize indole derivatives, more specifically tetrahydrocarbazoles, by C-H amination using only elemental oxygen as oxidant. The reaction uses the principle of C-H functionalization via Intermediate PeroxideS (CHIPS). In the first step, a hydroperoxide is generated oxidatively using visible light, a photosensitizer and elemental oxygen. In the second step, the N-nucleophile, an aniline, is introduced by Brønsted-acid catalyzed activation of the hydroperoxide leaving group. The products of the first and second step often precipitate and can be conveniently filtered off. The synthesis of a biologically active compound is shown.

Introduction

La funzionalizzazione diretta di legami CH è un obiettivo importante e in piedi a lungo in chimica organica 1. Tali trasformazioni possono essere molto potenti per snellire sintesi salvando passi, tempo e materiale rispetto ai metodi convenzionali che richiedono l'introduzione e la rimozione di attivare o dirigere gruppi. Pertanto, la funzionalizzazione di legami CH è anche interessante per la chimica verde 2. In condizioni di ossidazione, due legami CH o un CH e un legame eteroatomo-H può essere trasformato in legami CC e C-eteroatomo, rispettivamente (Figura 1) 3-9. Spesso queste reazioni di accoppiamento ossidativo richiedono ossidanti sintetici, catalizzatori costosi o alte temperature. Pertanto, molti tentativi di sviluppare metodi che utilizzano catalizzatori economici, condizioni benigne e ossigeno o aria come ossidante morsetto 10.

<img alt="Figura 1" fo:content-width = "5in" src = "/ files/ftp_upload/51504/51504fig1highres.jpg" width = "500" />
Figura 1. Reazioni di accoppiamento ossidativo. cliccate qui per vedere una versione più grande di questa figura.

Molti composti organici reagiscono lentamente con l'ossigeno dall'aria in reazioni di autossidazione che può funzionalizzare legami CH inserendo efficacemente O 2, formando una porzione idroperossido 11,12. Processi di autossidazione sono utilizzati su scala industriale di composti ossigenati generati da cariche idrocarburiche, ma autossidazione è anche un processo indesiderato se porta alla decomposizione di composti o materiali pregiati. In alcuni casi, ad esempio etere etilico, idroperossidi formate in aria possono anche essere esplosivi. Recentemente, abbiamo scoperto una reazione che utilizza un autossidazione per formare un nuovo legame CC da legami CH, senza necessità di un redox-attiva catalizzatore 13,14 </sup>. Semplicemente mescolando i substrati sotto ossigeno in presenza di un catalizzatore acido porta alla formazione dei nuovi prodotti. Chiave per la reazione è la formazione di idroperossidi facile intermedi, che vengono sostituiti con il secondo substrato mediante catalisi acida 15. La reazione, tuttavia, è limitato a xanthene e alcuni composti correlati che vengono facilmente ossidati sotto una atmosfera di ossigeno ed i prodotti hanno applicazioni finora non trovati. Tuttavia ispirato da questa scoperta, abbiamo sviluppato un metodo di accoppiamento ossidativo correlati che utilizza il principio della CH funzionalizzazione via perossidi intermedi (chips) di sintetizzare derivati ​​farmacologicamente attive indolici 16.

Indoli, soprattutto tetrahydrocarbazoles 1, può essere facilmente ossidato a idroperossidi 2 in presenza di ossigeno singoletto 17-19, che può essere generato utilizzando un sensibilizzante e luce visibile 20. A hydrporzione operoxide potrebbero servire come un gruppo uscente, se attivato da catalisi acida e consentire l'introduzione di un nucleofilo 21,22. Idroperossidi sono anche noti per sottoporsi acido catalizzata reazioni di riarrangiamento come utilizzato nella sintesi industriale del fenolo da cumene, il processo Hock 23. Con attenti studi di ottimizzazione, siamo riusciti a trovare le condizioni per favorire la reazione di sostituzione desiderata con N-nucleofili come aniline 3 oltre i percorsi di decomposizione indesiderate riarrangiamento 16. Qui, descriviamo questa procedura CHIPS due fasi in dettaglio, utilizzando solo la luce visibile, un sensibilizzatore, ossigeno e acido. Tra i prodotti selezionati sono derivati ​​indolici 4, che mostrano elevata attività antivirale o inibiscono il fattore di crescita vascolare endoteliale (VGF), che può essere importante per la terapia tumorale 24-26.

Protocol

1. Sintesi di Tetrahydrocarbazole idroperossidi La formazione del idroperossido viene rallentato se il tetrahydrocarbazole è molto colorato. In questo caso, purificarlo per ricristallizzazione usando toluene / pentano o mediante cromatografia su colonna per ottenere un materiale di partenza incolore. Per purificazione mediante cromatografia su colonna, imballare una colonna con uno strato inferiore di gel di silice e uno strato superiore di allumina. Mettere il tetrahydrocarbazole sulla sommità della colonn…

Representative Results

Sintesi di 1 – (5-nitroindolin-1-il) -2,3,4,9-tetraidro-1H-carbazolo (4a): Sintetizzata secondo il Procedimento A, R f = (esano / acetato di etile 70:30) 0.63. Purificazione: Purificare il prodotto utilizzando il metodo A, variante iter A1 (i punti 2.4, 2.5, 2.6). Arancione solido, Resa: 95%. 1 H NMR (500 MHz, DMSO-d6): δ 10.90 (s, 1H),…

Discussion

In sintesi, potremmo dimostrare che un legame CH in tetrahydrocarbazoles può essere comodamente funzionalizzato per generare prodotti CN-accoppiamento in una procedura in due fasi.

Il primo passo è un noto ossidazione photocatalyzed di tetrahydrocarbazole (1) o suoi derivati ​​con ossigeno elementare 17,19, dando un idroperossido 2. Se eseguita in toluene, i prodotti idroperossido precipitano e possono essere convenientemente isolati mediant…

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

Financial support from the DFG (Heisenberg scholarship to M.K., KL 2221/4-1; KL 2221/3-1) and the Max-Planck-Institut fuer Kohlenforschung is gratefully acknowledged.

Materials

1,2,3,4-Tetrahydrocarbazole Sigma Aldrich T12408 If coloured, purification may be necessary. See Protocol 1.1
Methanol Sigma Aldrich 322415 99.8% purity
4-Nitroaniline Acros Organics 128371000 99% purity
Trifluoroacetic acid Sigma Aldrich T6508 99% purity
Acetic acid J. T. Baker JTB RS 426960101 99-100% purity
Aniline Merck 8222560100
4-Aminobenzonitrile Sigma Aldrich 147753 98% purity

Riferimenti

  1. Bergman, R. G. Organometallic chemistry – C-H activation. Nature. 446, 391-393 (2007).
  2. Anastas, P., Green Eghbali, N. Green Chemistry: Principles and Practice. Chem. Soc. Rev. 39, 301-312 (2010).
  3. Yeung, C. S., Dong, V. M. Catalytic Dehydrogenative Cross-Coupling: Forming Carbon−Carbon Bonds by Oxidizing Two Carbon−Hydrogen Bonds. Chem. Rev. 111, 1215-1292 (2011).
  4. Liu, C., Zhang, H., Shi, W., Lei, A. Bond Formations between Two Nucleophiles: Transition Metal Catalyzed Oxidative Cross-Coupling Reactions. Chem. Rev. 111, 1780-1824 (2011).
  5. Klussmann, M., Sureshkumar, D. Catalytic Oxidative Coupling Reactions for the Formation of C–C Bonds Without Carbon-Metal Intermediates. Synthesis. 3, 353-369 (2011).
  6. Yoo, W. -. J., Li, C. -. J. Cross-Dehydrogenative Coupling Reactions of sp3-Hybridized C–H Bonds. Top. Curr. Chem. 292, 281-302 (2010).
  7. Dick, A. R., Sanford, M. S. Transition metal catalyzed oxidative functionalization of carbon-hydrogen bonds. Tetrahedron. 62, 2439-2463 (2006).
  8. Collet, F., Dodd, R. H., Dauban, P. Catalytic C–H amination: recent progress and future directions. Chem. Commun. 34, 5061-5064 (2009).
  9. Rohlmann, R., Mancheño, O. G. Metal-Free Oxidative C(sp3)-H Bond Couplings as Valuable Synthetic Tools for C-C Bond Formations. Synlett. 24, 6-10 (2013).
  10. Wendlandt, A. E., Suess, A. M., Stahl, S. S. Copper-Catalyzed Aerobic Oxidative C-H Functionalizations: Trends and Mechanistic Insights. Angew. Chem. Int. Ed. 50, 11062-11087 (2011).
  11. Hermans, I., Peeters, J., Jacobs, P. A. Autoxidation of Hydrocarbons: From Chemistry to Catalysis. Top. Catal. 50, 124-132 (2008).
  12. Milas, N. A. Auto-oxidation. Chem. Rev. 10, 295-364 (1932).
  13. Pintér, &. #. 1. 9. 3. ;., Sud, A., Sureshkumar, D., Klussmann, M. Autoxidative Carbon-Carbon Bond Formation from Carbon-Hydrogen Bonds. Angew. Chem. Int. Ed. 49, 5004-5007 (2010).
  14. Pintér, &. #. 1. 9. 3. ;., Klussmann, M. Sulfonic Acid Catalyzed Autoxidative Carbon-Carbon Coupling Reaction under Elevated Partial Pressure of Oxygen. Adv. Synth. Catal. 354, 701-711 (2012).
  15. Schweitzer-Chaput, B., et al. Synergistic Effect of Ketone and Hydroperoxide in Brønsted Acid Catalyzed Oxidative Coupling Reactions. Angew. Chem. Int. Ed. 52, 13228-13232 (2013).
  16. Gulzar, N., Klussmann, M. Aerobic C-H Amination of Tetrahydrocarbazole Derivatives via Photochemically Generated Hydroperoxides. Org. Biomol. Chem. 11, 4516-4520 (2013).
  17. Beer, R. J. S., McGrath, L., Robertson, A., Woodier, A. B. Tetrahydrocarbazole Peroxides. Nature. 164, 362-363 (1949).
  18. Iesce, M. R., Cermola, F., Temussi, F. . Photooxygenation of Heterocycles. Curr. Org. Chem. 9, 109-139 (2005).
  19. Mateo, C. A., Urrutia, A., Rodríguez, J. G., Fonseca, I., Cano, F. H. Photooxygenation of 1,2,3,4-Tetrahydrocarbazole: Synthesis of Spiro[cyclopentane-1,2′-indolin-3′-one]. J. Org. Chem. 61, 810-812 (1996).
  20. Wasserman, H. H., Ives, J. L. Singlet oxygen in organic synthesis. Tetrahedron. 37, 1825-1852 (1981).
  21. Liguori, L., et al. Electrophilic Aromatic Alkylation by Hydroperoxides. Competition between Ionic and Radical Mechanisms with Phenols. J. Org. Chem. 64, 8812-8815 (1999).
  22. Dussault, P. H., Lee, H. -. J., Liu, X. Selectivity in Lewis acid-mediated fragmentations of peroxides and ozonides: application to the synthesis of alkenes, homoallyl ethers, and 1,2-dioxolanes. J. Chem. Soc., Perkin Trans. , 3006-3013 (2000).
  23. Hock, H., Lang, S. Autoxydation von Kohlenwasserstoffen IX. Mitteil.: Über Peroxyde von Benzol-Derivaten. Ber. 77, 257-264 (1944).
  24. Boggs, S. D., Gudmundsson, K. S., Richardson, L. D. A., Sebahar, P. R. Tetrahydrocarbazole derivatives and their pharmaceutical use. USA patent WO. 2004/110999 A1. , (2004).
  25. Gudmundsson, K. S. HCV Inhibitors. USA patent WO 2006/ 121467 A2. , (2006).
  26. Lennox, W. J., Qi, H., Lee, D. -. H., Choi, S., Moon, Y. -. C. Tetrahydrocarbazoles as active agents for inhibiting VEGF production by translational control. USA patent WO 2006/ 065480 A2. , (2006).
check_url/it/51504?article_type=t

Play Video

Citazione di questo articolo
Gulzar, N., Klussmann, M. Synthesis of Antiviral Tetrahydrocarbazole Derivatives by Photochemical and Acid-catalyzed C-H Functionalization via Intermediate Peroxides (CHIPS). J. Vis. Exp. (88), e51504, doi:10.3791/51504 (2014).

View Video