Summary

Transferencia átomo de polimerización por radicales de monómeros funcionalizados vinilo Uso de perileno como fotocatalizador luz visible

Published: April 22, 2016
doi:

Summary

A method for the atom transfer radical polymerization of functionalized vinyl monomers using perylene as a visible-light photocatalyst is described.

Abstract

A standardized technique for atom transfer radical polymerization of vinyl monomers using perylene as a visible-light photocatalyst is presented. The procedure is performed under an inert atmosphere using air- and water-exclusion techniques. The outcome of the polymerization is affected by the ratios of monomer, initiator, and catalyst used as well as the reaction concentration, solvent, and nature of the light source. Temporal control over the polymerization can be exercised by turning the visible light source off and on. Low dispersities of the resultant polymers as well as the ability to chain-extend to form block copolymers suggest control over the polymerization, while chain end-group analysis provides evidence supporting an atom-transfer radical polymerization mechanism.

Introduction

The synthesis of technologically advanced polymers requires precise control over polymer molecular weight, dispersity (Ð), composition, and architecture.1,2 Controlled radical polymerizations (CRPs)3-8 have revolutionized the synthesis of well-defined polymers, with atom transfer radical polymerization (ATRP) being the most used CRP, largely due to operational simplicity and synthetic versatility.9-14 The crux of ATRP is the ability to reversibly deactivate the polymerization, controlling the equilibrium between a propagating radical and a dormant species. Enforcing a low concentration of active radicals greatly minimizes bimolecular termination pathways and allows for the synthesis of well-defined polymers.

Traditional ATRP relies on a transition metal catalyst to mediate this equilibrium.3 These metal catalysts contaminate the polymer product and impede implementation in biomedical or electronic applications while also raising environmental concerns. Although significant strides have been made to reduce the catalyst concentration to ppm levels, these methodologies require more demanding experimental conditions and metal contamination is still not entirely eliminated.15,16

Reversible addition-fragmentation transfer17,18 and nitroxide-mediated polymerizations19,20 are CRPs that do not require metal catalysts, although they have been used less often than ATRP.3 Recently, reversible chain-transfer21 and reversible complexation22,23 variants of ATRP that can use organic catalysts were reported. However, these methodologies require the use of alkyl iodide initiators and are not effective with the alkyl bromides commonly employed in ATRP. A highly desirable CRP would match the performance, feasibility, and robustness of traditional ATRP while being catalyzed by an organic catalyst under mild conditions.

Here, we describe a methodology for the radical polymerization of functionalized vinyl monomers using perylene as a visible-light photocatalyst. Through optimization of parameters such as stoichiometry, concentration, time, and light flux, the molecular weight of the polymers can be controlled.24, 25 Similar methodologies have been recently introduced using phenothiazine derivatives as photocatalysts for metal-free ATRP.26, 27 Because researchers in the field of polymerization catalysis are constantly developing new catalytic systems, the ability to compare catalyst performance across a number of metrics is vital. This ability to make comparisons relies heavily upon procedural consistency and clarity on the part of the researchers performing the experiments. As such, it is our goal that this video will be used to help precisely communicate the methods by which these polymers are synthesized and characterized.

Protocol

PRECAUCIÓN: Muchas de las sustancias químicas utilizadas en este protocolo son sustancias peligrosas. Consulte las Hojas de Datos de Seguridad del Material (MSDS) y el uso de equipo de protección personal (EPP) apropiado cuando se trabaja con estas sustancias. 1. La purificación, la preparación y conservación de los reactivos Purificar todos los disolventes para ser utilizados con un sistema de purificación de disolvente de acuerdo con el protocolo del fabricante. Si un sis…

Representative Results

Tabla 1 muestra el rango de resultados de la polimerización alcanzables a través de este método. Estos datos muestran que perileno es capaz de servir como un fotocatalizador para la polimerización de un número de monómeros de vinilo funcionalizados. Para un monómero específico, el ajuste de cualquiera de un número de parámetros de reacción tales como disolvente, estequiometría, iniciador, y la fuente de luz conduce a polímeros con diferentes pesos moleculare…

Discussion

Aunque el protocolo demuestra un ejemplo específico de esta técnica de polimerización, las opciones disponibles para el investigador que realizan esta reacción son bastante amplio. Las modificaciones se pueden hacer en una serie de puntos a lo largo del protocolo para permitir la optimización de cualquier photoredox particular, se está realizando ATRP. A medida que nuevos monómeros, iniciadores y catalizadores para esta reacción están siendo investigados, la estequiometría y el disolvente utilizado para llevar…

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

The authors would like to acknowledge the University of Colorado Boulder for its support of this work.

Materials

perylene, min 98.0% TCI America TCP0078-025G purify by sublimation
N,N-dimethylformamide VWR EM-DX1726-1 Omnisolv
methyl methacrylate, 99% VWR 200000-678 distilled prior to use, stored in refrigerator
ethyl α-bromophenyl acetate  Aldrich 554065 distilled prior to use stored in refrigerator
butylated hydroxytoluene  Aldrich W218405
Chloroform-D Cambridge Isotope Labs DLM-7-100
tetrahydrofuran VWR EM-TX0279-1 Omnisolv
methanol VWR BDH1135
dichloromethane VWR EM-DX0831-1 Omnisolv
styrene, 99% VWR AAAA18481-0F distilled prior to use, stored in refrigerator
glass scintillation vial, 20 mL VWR 66022-065
screw top vial, 2 mL Agilent 5182-0715
septum cap for screw top vial Agilent 5182-0717
heavy wall pressure vessel, 100 mL Synthware P160005 
syringe, 1 mL norm-ject VWR 89174-491
NMR tube New Era NE-UL5-7'
nylon syringe filter, 0.45 um VWR 28143-240
glovebox Mbraun LABstar
solvent purification system Mbraun MB-SPS-800
stirplate IKA 3582401
light-emitting diodes Creative Lighting Solutions CL-FRS1210-5M-12V-WH 2x 12-inch strips of 5500 K white LEDs were used for illumination
12V DC power supply for LEDs Creative Lighting Solutions CL-PS16001-40W
high performance liquid chromatograph  Agilent G1310B, G1322A, G1329B, G1316A
gel permeation size-exclusion columns Agilent PL1110-6500
multi-angle light scattering detector Wyatt WTREOS
differential refractometer Wyatt WTREX

Riferimenti

  1. Bates, F. S., Hillmyer, M. A., Lodge, T. P., Bates, C. M., Delaney, K. T., Fredrickson, G. H. Multiblock Polymers: Panacea or Pandora’s Box. Science. 336 (6080), 434-440 (2012).
  2. Hawker, C. J., Wooley, K. L. The Convergence of Synthetic Organic and Polymer Chemistries. Science. 309 (5738), 1200-1205 (2005).
  3. di Lena, F., Matyjaszewski, K. Transition Metal Catalysts for Controlled Radical Polymerization. Prog. Polym. Sci. 35 (8), 959-1021 (2010).
  4. Rosen, B. M., Percec, V. Single-Electron Transfer and Single-Electron Transfer Degenerative Chain Transfer Living Radical Polymerization. Chem. Rev. 109 (11), 5069-5119 (2009).
  5. Moad, G., Rizzardo, E., Thang, S. H. Toward Living Radical Polymerization. Acc. Chem. Res. 41 (9), 1133-1142 (2008).
  6. Braunecker, W. A., Matyjaszewski, K. Controlled/living Radical Polymerization: Features, Developments, and Perspectives. Prog. Polym. Sci. 32 (1), 93-146 (2007).
  7. Kamigaito, M., Ando, T., Sawamoto, M. Metal-Catalyzed Living Radical Polymerization. Chem. Rev. 101 (12), 3689-3746 (2001).
  8. Matyjaszewski, K. Comparison and Classifications of Controlled/Living Radical Polymerizations. ACS Symp. Ser. 768 (1), 2-26 (2000).
  9. Matyjaszewski, K., Tsarevsky, N. V. Macromolecular Engineering by Atom Transfer Radical Polymerization. J. Am. Chem. Soc. 136 (18), 6513-6533 (2013).
  10. Matyjaszewski, K. Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives. Macromolecules. 45 (10), 4015-4039 (2012).
  11. Ouchi, M., Terashima, T., Sawamoto, M. Transition Metal-Catalyzed Living Radical Polymerization: Toward Perfection in Catalysis and Precision Polymer Synthesis. Chem. Rev. 109 (11), 4963-5050 (2009).
  12. Matyjaszewski, K., Tsarevsky, N. V. Nanostructured Functional Materials Prepared by Atom Transfer Radical Polymerization. Nat. Chem. 1 (4), 276-288 (2009).
  13. Ouchi, M., Terashima, T., Sawamoto, M. Precision Control of Radical Polymerization via Transition Metal Catalysis: From Dormant Species to Designed Catalysts for Precision Functional Polymers. Acc. Chem. Res. 41 (9), 1120-1132 (2008).
  14. Matyjaszewski, K., Xia, J. Atom Transfer Radical Polymerization. Chem. Rev. 101 (9), 2921-2990 (2001).
  15. Magenau, A. J. D., Strandwitz, N. C., Gennaro, A., Matyjaszewski, K. Electrochemically Mediated Atom Transfer Radical Polymerization. Science. 332 (6025), 81-84 (2011).
  16. Matyjaszewski, K., et al. Diminishing Catalyst Concentration in Atom Transfer Radical Polymerization with Reducing Agents. Proc. Natl. Acad. Sci. U.S.A. 103 (42), 15309-15314 (2006).
  17. Moad, G., Rizzardo, E., Thang, S. H. Living Radical Polymerization by the RAFT Process- A Second Update. Aust. J. Chem. 62 (11), 1402-1472 (2009).
  18. Moad, G., Rizzardo, E., Thang, S. H. Radical Addition-Fragmentation Chemistry in Polymer Synthesis. Polymer. 49 (5), 1079-1131 (2008).
  19. Nicolas, J., et al. Nitroxide-Mediated Polymerization. Prog. Polym. Sci. 38 (1), 63-235 (2013).
  20. Hawker, C. J., Bosman, A. W., Harth, E. New Polymer Synthesis by Nitroxide Mediated Living Radical Polymerizations. Chem. Rev. 101 (12), 3661-3688 (2001).
  21. Goto, A., Wakada, T., Fukuda, T., Tsujii, Y. A Systematic Kinetic Study in Reversible Chain Transfer Catalyzed Polymerizations (RTCPs) with Germanium, Tin, Phosphorus, and Nitrogen Catalysts. Macromol. Chem. Phys. 211 (5), 594-600 (2010).
  22. Goto, A., Ohtsuki, A., Ohfuji, H., Tanishima, M., Kaji, H. Reversible Generation of a Carbon-Centered Radical from Alkyl Iodide Using Organic Salts and Their Application as Organic Catalysts in Living Radical Polymerization. J. Am. Chem. Soc. 135 (30), 11131-11139 (2013).
  23. Goto, A., et al. Reversible Complexation Mediated Living Radical Polymerization (RCMP) Using Organic Catalysts. Macromolecules. 44 (22), 8709-8715 (2011).
  24. Miyake, G. M., Theriot, J. C. Perylene as an Organic Photocatalyst for the Radical Polymerization of Functionalized Vinyl Monomers Through Oxidative Quenching With Alkyl Bromides and Visible Light. Macromolecules. 47 (23), 8255-8261 (2014).
  25. Miyake, G. M. Organocatalyzed Photoredox Mediated Polymerization Using Visible Light. US Patent Application. 14, (2013).
  26. Treat, N. J., et al. Metal-Free Atom Transfer Radical Polymerization. J. Am. Chem. Soc. 136 (45), 16096-16101 (2014).
  27. Pan, X., Lamson, M., Yan, J., Matyjaszewski, K. Photoinduced Metal-Free Atom Transfer Radical Polymerization of Acrylonitrile. ACS Macro Lett. 4 (2), 192-196 (2015).
check_url/it/53571?article_type=t

Play Video

Citazione di questo articolo
Theriot, J. C., Ryan, M. D., French, T. A., Pearson, R. M., Miyake, G. M. Atom Transfer Radical Polymerization of Functionalized Vinyl Monomers Using Perylene as a Visible Light Photocatalyst. J. Vis. Exp. (110), e53571, doi:10.3791/53571 (2016).

View Video