Изготовление Белый светоизлучающих электрохимических ячеек с устойчивое излучение от эксиплексов
Summary
The authors present a method for fabricating stable white-light-emitting electrochemical cells utilizing emission from exciplexes formed between a blue-emitting fluorene polymer and aromatic amines.
Abstract
Авторы представляют подход для изготовления стабильного белого светового излучения из полимерных светоизлучающих электрохимических ячеек (PLECs), имеющий активный слой, который состоит из сине-флуоресцентный поли (9,9-ди-н-dodecylfluorenyl-2,7-диил) ( ПФО) и π-сопряженных молекул трифениламин. Этот белый свет излучение происходит из эксиплексов, образованных между ОФП и аминов в электронно-возбужденных состояний. Устройство , содержащее PFD, 4,4 ', 4' '- трис [2-нафтил (фенил) амино] трифениламин (2-TNATA), поли (этиленоксида) и K 2 CF 3 SO 3 белеют световое излучение с Commission Internationale де l'ECLAIRAGE (CIE) координаты (0,33, 0,43) и Индекс цветопередачи (CRI) Ра = 73 при напряжении измерений постоянном напряжении 3,5 В. показал, что МКО координаты (0.27, 0.37), Ra из 67, а цвет наблюдаемой эмиссии сразу после приложения напряжения 5 V были почти без изменений и стабильными после300 сек.
Introduction
Research and development of polymer light-emitting electrochemical cells (PLECs) have expanded in recent years.1-15 PLECs are similar to organic light-emitting diodes (OLEDs) in that both are surface emitting organic devices and are expected to find their way into future lighting applications. OLEDs are already on the market, but the cost is still high, one reason being that OLEDs need a complicated device structure with multiple layers. In contrast, PLECs have a very simple device structure which consists of a single active layer (emitting layer) between a pair of electrodes. This means that PLECs are suited to mass production processes such as roll-to-roll printing and coating.
A PLEC has an active layer consisting of a fluorescent π-conjugated polymer (FCP). The FCP can be electrochemically doped with a polymer electrolyte (a mixture of an ion conducting polymer and a salt). The FCP is p-doped on the anode side and n-doped on the cathode side during operation, and generates excitons which emit light between the p- and n-doped regions. Therefore, the emission color reflects the exciton emission (=fluorescence) wavelength of the FCP.
Stable white light emission is important for lighting applications, and color mixing techniques which employ two or more emitters have been widely used to achieve this.10-14 Recently, we presented a different approach for obtaining stable white light emission, using an active layer which contains blue-fluorescent poly(9,9-di-n-dodecylfluorenyl-2,7-diyl) (PFD) and π-conjugated aromatic amines15. This white light emission comes from exciplexes formed between PFD and amine molecules in excited states. Exciplex emission has a broader spectrum compared to the exciton emission from the PDF and/or amines, which gives it a color close to that of natural light. This translates to a higher color rendering index (CRI), which is preferable for lighting applications.
In this article, the authors describe the procedure used to fabricate the exciplex based LECs and show the stability of their white light emission.
Protocol
Representative Results
Discussion
LEC имеет активный слой , содержащий гидрофобный ПФД и ароматические амины, так и гидрофильные полиэтиленоксида и KCF 3 SO 3. Поскольку эти материалы имеют очень различную растворимость, тщательное приготовление раствора нанесения покрытия имеет решающее значение, чтобы избежа…
Divulgazioni
The authors have nothing to disclose.
Acknowledgements
Эта работа была частично поддержана дотация для научных исследований (№ 24225003). Эта работа была выполнена при финансовой поддержке JX Nippon Oil & Energy Corporation.
Materials
| Poly(9,9-di-n-dodecylfluorenyl-2,7-diyl) (PFD) | Aldrich | 571660 | |
| 4,4’,4’’-Tris[2-naphthyl(phenyl)amino]triphenylamine (2-TNATA) | Aldrich | 768669 | |
| 9,9-Dimethyl-N,N’-di(1-naphthyl)-N,N’-diphenyl-9H-fluorene-2,7-diamine (DMFL-NPB) | Aldrich | ||
| Poly(ethylene oxide) (PEO) | Aldrich | 182028 | |
| Potassium tirifluoromethansulfonate (KCF3SO3) | Aldrich | 422843 | dried under vacuum at 200 °C for 2 hr prior to use |
| Chloroform | Kanto Chemical Co. | 08097-25 | dehydrated |
| Cyclohexanone | Kanto Chemical Co. | 07555-00 | |
| SCAT 20-X (detergent) | Daiichi Kogyo Seiyaku | diluted with water | |
| Acetone | Kanto Chemical Co. | 01866-25 | Electronic grage |
| 2-propanol | Kanto Chemical Co. | 32439-75 | Electronic grage |
| 13mm GD/X Disposable Filter Device PVDF Filter Media, Polypropylene Housing | Whatman | 6872-1304 | |
| UV/O3 Treating Unit | SEN Lights Co. | SSP16-110 | |
| Spectral Photo Detector | Otsuka Electronics | MCPD 9800 | |
| Voltage Current Source Monitor | ADCMT | 6241A | |
| Evaporation Mask | Tokyo Process Service Co., Ltd. | NA | The evaporation mask was wet-etched to create openings for patterned deposition of aluminum. The size of the mask is 100 mm x 100 mm x 0.2 mm-thick. |
Riferimenti
- Pei, Q., Yu, G., Zhang, C., Yang, Y., Heeger, A. J. Polymer light-emitting electrochemical cells. Science. 269 (5227), 1086-1088 (1995).
- Sun, Q., Li, Y., Pei, Q. Polymer light-emitting electrochemical cells for high-efficiency low-voltage electroluminescent devices. J. Disp. Technol. 3 (2), 211-224 (2007).
- Meier, S. B., et al. Light-emitting electrochemical cells: recent progress and future prospects. Mater. Today. 17 (5), 217-223 (2014).
- Edman, L., et al. Single-component light-emitting electrochemical cell fabricated from cationic polyfluorene: Effect of film morphology on device performance. J. Appl. Phys. 98 (4), 044502 (2005).
- Fang, J., Matyba, P., Edman, L. The Design and Realization of Flexible, Long-Lived Light-Emitting Electrochemical Cells. Adv. Funct. Mater. 19 (16), 2671-2676 (2009).
- Yu, Z., et al. Stabilizing the Dynamic p− i− n Junction in Polymer Light-Emitting Electrochemical Cells. J. Phys. Chem. Lett. 2 (5), 367-372 (2011).
- Sandström, A., Dam, H. F., Krebs, F. C., Edman, L. Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating. Nat. Commun. 3, 1002 (2012).
- Liang, J., Li, L., Niu, X., Yu, Z., Pei, Q. Elastomeric polymer light-emitting devices and displays. Nat. Photonics. 7 (10), 817-824 (2013).
- Yang, Y., Pei, Q. Efficient blue-green and white light-emitting electrochemical cells based on poly 9, 9-bis (3, 6-dioxaheptyl)-fluorene-2, 7-diyl. J. Appl. Phys. 81 (7), 3294-3298 (1997).
- Tang, S., Buchholz, H. A., Edman, L. White Light from a Light-Emitting Electrochemical Cell: Controlling the Energy-Transfer in a Conjugated Polymer/Triplet-Emitter Blend. ACS Appl. Mater. Iterfaces. 7 (46), 25955-25960 (2015).
- Nishikitani, Y., Takizawa, D., Nishide, H., Uchida, S., Nishimura, S. White Polymer Light-Emitting Electrochemical Cells Fabricated Using Energy Donor and Acceptor Fluorescent π-Conjugated Polymers Based on Concepts of Band-Structure Engineering. J. Phys. Chem. C. 119 (52), 28701-28710 (2015).
- Sun, M., Zhong, C., Li, F., Cao, Y., Pei, Q. A Fluorene− Oxadiazole Copolymer for White Light-Emitting Electrochemical Cells. Macromolecules. 43 (4), 1714-1718 (2010).
- Tang, S., Pan, J., Buchholz, H., Edman, L. White Light-Emitting Electrochemical Cell. ACS Appl. Mater. Interfaces. 3 (9), 3384-3388 (2011).
- Tang, S., Pan, J., Buchholz, H. A., Edman, L. White light from a single-emitter light-emitting electrochemical cell. J. Am. Chem. Soc. 135 (9), 3647-3652 (2013).
- Nishikitani, Y., et al. White polymer light-emitting electrochemical cells using emission from exciplexes with long intermolecular distances formed between polyfluorene and π-conjugated amine molecules. J. Appl. Phys. 118 (22), 225501 (2015).
- Tang, S., Mindemark, J., Araujo, C. M. G., Brandell, D., Edman, L. Identifying Key Properties of Electrolytes for Light-Emitting Electrochemical Cells. Chem. Mater. 26 (17), 5083-5088 (2014).
