Summary

시각화되고 일정한 부피의가스 고체 커플링 테스트 시스템을 사용하여 CO 2-베어링 석탄을 사용한 축축한 압축 실험

Published: June 12, 2019
doi:

Summary

이 프로토콜은 시각화되고 일정한 부피가 나는 가스 고체 커플링 테스트 시스템을 사용하여 연탄 샘플을 준비하고 상이한 CO2 압력에서 연탄으로 공축 압축 실험을 수행하는 방법을 보여줍니다. 또한 CO2 흡착에 의해 유발되는 석탄의 물리적 및 기계적 특성의 변화를 조사하는 것을 목표로합니다.

Abstract

깊은 석탄 솔기에이산화탄소 (CO2)를 주입하는 것은 대기 중 온실 가스의 농도를 줄이고 석탄 층 메탄의 회수를 증가시키는 데 큰 의미가 있습니다. 석탄의 물리적 및 기계적 특성에 대한 CO2 흡착의 영향을 조사하기 위해 시각화되고 일정한 부피의 가스 고체 커플링 시스템이 여기에 도입되었습니다. 일정한 볼륨을 유지하고 카메라를 사용하여 샘플을 모니터링 할 수있는이 시스템은 계측기의 정확도를 개선하고 프랙탈 지오메트리 방법으로 골절 진화를 분석 할 수있는 잠재력을 제공합니다. 이 백서는 가스 고체 커플링 테스트 시스템과 상이한 CO2 압력에서 연탄 샘플을 사용하여 축축 압축 실험을 수행하는 모든 단계를 제공합니다. 생석탄과 후메이트 시멘트에 의해 냉압압착된 연탄은 고압CO2에 적재되고, 표면은 카메라를 사용하여 실시간으로 모니터링됩니다. 그러나 연탄과 원석탄 의 유사성은 여전히 개선이 필요하며, 메탄(CH4)과같은 인화성 가스는 시험을 위해 주입될 수 없다. 결과는 CO2 흡착이 연탄의 피크 강도 및 탄성 계수 감소로 이어지고, 실패 상태에서 연탄의 골절 진화가 프랙탈 특성을 나타낸다는 것을 보여준다. 강도, 탄성 계수 및 프랙탈 치수는 모두 CO2 압력과 상관관계가 있지만 선형 상관관계는 없습니다. 시각화되고 일정한 부피의 가스 고체 커플링 테스트 시스템은 멀티필드 커플링 효과를 고려하여 암석 역학에 대한 실험적인 연구를 위한 플랫폼역할을 할 수 있습니다.

Introduction

대기 중의CO2 농도가 증가하는 것은 지구 온난화 효과를 유발하는 직접적인 요인입니다. 석탄의 강력한 흡착 능력으로 인해, 석탄 솔기의 CO2 격리는 온실 가스 1,2,3의글로벌 배출을 감소시키는 실용적이고 환경 친화적 인 수단으로 간주됩니다. 동시에, 주입된CO2는 CH4를 대체할 수 있고 석탄층 메탄 회수(ECBM) 4,5,6에서가스 생산 촉진을 초래할 수 있다. CO2 격리의 생태 및 경제 전망은 최근 연구자들 뿐만 아니라 다양한 국제 환경 보호 그룹 및 정부 기관 사이에서 전 세계적으로 주목을 받고 있습니다.

석탄은 기공, 골절 및 석탄 매트릭스로 구성된 이질적이고 구조적으로 이방성 암석입니다. 기공 구조는 많은 양의 가스를 흡착 할 수있는 큰 비 표면적을 가지며, 가스 격리에 중요한 역할을하며, 골절은자유 가스 흐름 7,8의주요 경로입니다. 이 독특한 물리적 구조는 CH4 및 CO2에대한 훌륭한 가스 흡착 용량으로 이어집니다. 광산 가스는 몇 가지 형태로 석탄에 증착된다 : (1) 미세 기공과 큰 기공의 표면에 흡착; (2) 석탄 분자 구조에 흡수; (3) 골절 및 더 큰 기공에서 자유 가스로; (4) 퇴적물에 용해됩니다. CH4 및 CO2에 대한 석탄의 흡착 거동은 매트릭스 부종을 유발하며, 추가 연구는 이질적인 과정이며 석탄 리소타입9,10,11과관련이 있음을 입증한다. 또한, 가스 흡착은 석탄12,13,14의구성 관계에 손상을 초래할 수 있다.

원석탄 샘플은 일반적으로 석탄 및 CO2 커플링 실험에 사용된다. 특히, 석탄 광산의 작업 면에서 큰 석탄 조각을 절단하여 샘플을 준비합니다. 그러나, 원석탄의 물리적 및 기계적 성질은 석탄 솔기에서 천연 기공과 골절의 무작위 공간 분포로 인해 필연적으로 높은 분산도를 갖는다. 또한 가스 베어링 석탄은 부드럽고 모양을 변경하기가 어렵습니다. 직교 실험 방법의 원리에 따르면, 연탄은 원탄 분말 및 시멘트로 재구성되며, 석탄 흡착 시험15,16에사용되는 이상적인 재료로 간주됩니다. 금속 다이로 냉간 압착되기 때문에 강도를 미리 설정할 수 있으며 시멘트의 양을 조정하여 안정적으로 유지되어 단일 가변 효과의 비교 분석에 이점을 얻을 수 있습니다. 또한 연탄 시료의 다공성은 ~4-10배이지만, 원석탄 시료의 흡착 및 탈착 특성 및 응력-변형 곡선이 실험 연구17,18에서 발견되었습니다. , 19세 , 20. 이 논문에서는 연탄21을제조하기 위해 가스 베어링 석탄에 대한 유사한 재료의 계획이 채택되었습니다. 이 원유는 중국 안후이성 화이난의 신좡지 탄광에서 4671B6 작업용 으로 채취되었다. 석탄 솔기는 지하 약 450m, 해발 360m이며, 약 15°로 떨어지고 두께는 약 1.6m입니다. 연탄 시료의 높이와 직경은 각각 100mm와 50mm이며, 이는 국제 암석 역학 협회(ISRM)22에서권장하는 크기입니다.

실험실 조건하에서 가스 베어링 석탄 실험을위한 이전의 축축 또는 삼축 적재 테스트 장비는 동료 23,24,25,26으로 제시 된 몇 가지 부족과 한계를 가지고 있습니다. ,27,28: (1) 적재 과정에서 피스톤이 움직일 때 용기 부피가 감소하여 가스 압력의 변동과 가스 흡착의 교란을 일으킵니다. (2) 고가스 압력 환경에서 시료의 실시간 영상 모니터링뿐만 아니라 원주 변형 측정은 수행하기 어렵다; (3) 기계적 반응 특성을 분석하기 위해 미리로드 된 샘플에 동적 부하 장애의 자극으로 제한됩니다. 기체 고체 커플링 조건에서 기기 정밀도 및 데이터 수집을 개선하기 위해, 가시화 및 상량 량 테스트시스템(29)이 개발되었으며(도1),(1) 시각화된 로딩 용기를 포함하는 핵심 성분인 상수 체임버; (2) 진공 채널, 2개의 충진 채널 및 방출 채널을 가진 가스 충진 모듈; (3) 전기 유압 서보 범용 테스트 기계 및 제어 컴퓨터로 구성된 축 로딩 모듈; (4) 원주 변위 측정 장치, 가스 압력 센서 및 시각화 된 적재 용기의 창에 카메라로 구성된 데이터 수집 모듈.

코어 시각화 용기(그림 2)는 두 개의 조정 실린더가 상부 플레이트에 고정되고 피스톤이 빔을 통해 로딩과 동시에 이동하고 로딩 피스톤의 단면적이 동일한지 에 대해 특별히 설계되었습니다. 조정 실린더의 합계입니다. 내부 구멍과 연질 파이프를 통해 흐르는 용기와 두 개의 실린더의 고압 가스가 연결됩니다. 따라서 용기 로딩 피스톤이 아래쪽으로 이동하고 가스를 압축하면 이 구조는 부피 변화를 상쇄하고 압력 간섭을 제거할 수 있습니다. 또한, 피스톤에 가해지는 막대한 가스 유도 역력이 시험 중에 방지되어 기기의 안전도크게 향상됩니다. 강화 된 보로 실리 케이트 유리가 장착되어 있으며 선박의 3 면에 위치한 창문은 샘플 사진을 찍을 수있는 직접적인 방법을 제공합니다. 이 유리는 낮은 팽창 속도, 고강도, 광 투과율 및 화학적 안정성29로최대 10MPa 가스에 대한 테스트를 성공적으로 완료하고 입증되었습니다.

이 백서는 연탄을 준비하는 모든 조각에 대한설명을 포함하는 새로운 시각화 및 일정한 부피 가스 고체 커플링 테스트 시스템과 함께 CO2-베어링 석탄의 축축 압축 실험을 수행하는 절차를 설명합니다. 원료 석탄 분말과 나트륨 humate를 사용하여 샘플뿐만 아니라 고압 CO2를 주입하고 축축 압축을 수행하는 연속단계. 전체 샘플 변형 프로세스는 카메라를 사용하여 모니터링됩니다. 이 실험 적 접근법은 가스 베어링 석탄의 흡착 유발 손상 및 골절 진화 특성을 정량적으로 분석하는 대체 방법을 제공합니다.

Protocol

1. 견본 준비 신좡지 탄광에서 4671B6 작업 면에서 원시 석탄 블록을 수집합니다. 구조의 낮은 강도와 느슨함으로 인해 원석탄이 파손되어 불순물이 섞일 수 있습니다. 이러한 내부 및 외부 요인의 영향을 피하고 석탄의 불균일성을 최대한 줄이려면 대형 석탄 블록 (길이 약 15cm, 너비 10cm, 높이 10cm)을 선택하십시오. 트위저를 사용하여 석탄에 섞인 불순물을 제거하고 분쇄기 챔버를 흡…

Representative Results

연탄 시료의 평균 질량은 230 g이었다. 산업 분석에 따라 연탄은 4.52 %의 수분 함량과 15.52 %의 회분 함량을 나타내었다. 또한 휘발성 함량은 약 31.24%였다. 후메이트 나트륨이 석탄에서 추출됨에 따라 연탄의 성분은 원탄과 유사했습니다. 물리적 특성은 표2에 표시됩니다. 원석탄과 연탄의 기계적 성질의 비교는 <strong…

Discussion

고압 가스의 위험을 고려할 때 테스트 중에 몇 가지 중요한 단계가 중요합니다. 밸브와 O 링은 정기적으로 검사하고 교체해야 하며, 실험실에서 발화원을 허용해서는 안 됩니다. 수동 압력 조절 밸브를 사용할 때 실험자는 밸브를 천천히 비틀어 시각화 된 용기의 압력이 점차 증가하도록해야합니다. 시험 중에 용기를 분해하지 마십시오. 실험이 완료되면, 용기의 백도어는 고압 가스의 총 방출 후?…

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

이 작품은 중국 국립 주요 과학 기기 개발 프로젝트 (그랜트 번호 51427804)와 산동성 국립 자연 과학 재단 (그랜트 번호)에 의해 지원되었다. ZR2017MEE023).

Materials

3Y-Leica MPV-SP photometer microphotometric system Leica,Germany M090063016 Used for vitrinite
reflectance measurement
Automatic isotherm adsorption instrument BeiShiDe Instrument Technology (Beijing)CO.,Ltd. 3H-2000PH Isothermal adsorption test
Electro hydraulic servo universal testing machine Jinan Shidaishijin testing machine CO.,Ltd WDW-100EIII Used to provide
axial pressure
Gas pressure sensor Beijing Star Sensor Technology CO.,LTD CYYZ11 Gas pressure monitoring
Gas tank(carbon dioxide/helium) Heifei Henglong Gas.,Ltd Gas resource
high-speed camera Sony corporation FDR-AX30 Image monitoring
Incubator Yuyao YuanDong Digital Instrument Factory XGQ-2000 Briquette drying
jaw crusher Hebi Tianke Instrument CO.,Ltd EP-2 Coal grinding
Manual pressure reducing valve Shanghai Saergen Instrument CO.,Ltd R41 Outlet gas pressure adjustment
Proximate Analyzer Changsha Kaiyuan Instrument CO.,Ltd 5E-MAG6700 Coal industrial analysis
Resistance strain gauge Jinan Sigmar Technology CO.,LTD ASMB3-16/8 Poisson ratio measurement
Sieve shaker (6,16mesh) Hebi Tianguan Instrument CO.,Ltd GZS-300 Coal powder shelter
Soft pipe Jinan Quanxing High pressure pipe CO.,Ltd Inner diameter=5 mm
maximal pressure=30 MPa
Standard rock sample circumferential deformation test apparatus Huainan Qingda Machinery CO.,Ltd Circumferential deformation
acquisition
Strain controlled
direct shear apparatus
Beijing Aerospace Huayu Test Instrument CO.,LTD ZJ-4A Tensile strength, cohesion, internal friction
angle measurement
Vaccum pump Fujiwara,Japan 750D Used to vaccumize the vessel
Valve Jiangsu Subei Valve Co.,Ltd S4 NS-MG16-MF1 Gas seal
Visual loading vessel Huainan Qingda Machinery CO.,Ltd Instrument for sample
loading and real-time monitoring

Riferimenti

  1. Mazzotti, M., Pini, R., Storti, G. Enhanced coalbed methane recovery. Journal of Supercritical Fluids. 47 (3), 619-627 (2009).
  2. Litynski, J., et al. U.S. Department of Energy’s Regional Carbon Sequestration Partnership Program: Overview. Energy Procedia. 1 (1), 3959-3967 (2009).
  3. Lackner, K. S. A Guide to CO2 Sequestration. Science. 300 (5626), 1677-1678 (2015).
  4. Zhou, F. D., et al. A feasibility study of ECBM recovery and CO2, storage for a producing CBM field in Southeast Qinshui Basin, China. International Journal of Greenhouse Gas Control. 19 (19), 26-40 (2013).
  5. Zhou, F., Hussain, F., Cinar, Y. Injecting pure N2 and CO2 to coal for enhanced coalbed methane: Experimental observations and numerical simulation. International Journal of Coal Geology. 116 (5), 53-62 (2013).
  6. Pini, R., Ottiger, S., Storti, G., Mazzotti, M. Pure and competitive adsorption of CO2, CH4 and N2 on coal for ECBM. Energy Procedia. 1 (1), 1705-1710 (2009).
  7. Nie, B. S., Li, X. C., Cui, Y. J., Lu, H. Q. . Theory and application of gas migration in coal seam. , (2014).
  8. Scott, A. R., Mastalerz, M., Glikson, M., Golding, S. D. Improving coal gas recovery with microbially enhanced coalbed methane. Coalbed Methane: Scientific, Environmental and Economic Evaluation. , 89-110 (1999).
  9. Gorucu, F., et al. Effects of matrix shrinkage and swelling on the economics of enhanced-coalbed-methane production and CO2 sequestration in coal. Spe Reservoir Evaluation Engineering. 10 (4), 382-392 (2007).
  10. Liu, S. M., Wang, Y., Harpalani, S. Anisotropy characteristics of coal shrinkage/swelling and its impact on coal permeability evolution with CO2 injection. Greenhouse Gases Science & Technology. 6 (5), 615-632 (2016).
  11. Larsen, J. W. The effects of dissolved CO2, on coal structure and properties. International Journal of Coal Geology. 57 (1), 63-70 (2004).
  12. Mastalerz, M., Gluskoter, H., Rupp, J. Carbon dioxide and methane sorption in high volatile bituminous coals from Indiana, USA. International Journal of Coal Geology. 60 (1), 43-55 (2004).
  13. Li, X. C., Nie, B. S., He, X. Q., Zhang, X., Yang, T. Influence of gas adsorption on coal body. Journal of China Coal Society. 36 (12), 2035-2038 (2011).
  14. Du, Q. H., Liu, X. L., Wang, E. Z., Wang, S. J. Strength Reduction of Coal Pillar after CO2 Sequestration in Abandoned Coal Mines. Minerals. 7 (2), 26-41 (2017).
  15. Zhao, B., et al. Similarity criteria and coal-like material in coal and gas outburst physical simulation. International Journal of Coal Science and Technology. 5 (2), 167-178 (2018).
  16. Xu, J., Ye, G. -. b., Li, B. -. b., Cao, J., Zhang, M. Experimental study of mechanical and permeability characteristics of moulded coals with different binder ratios. Rock and Soil Mechanics. 36 (1), 104-110 (2015).
  17. Barbara, D., et al. Balance of CO2/CH4 exchange sorption in a coal briquette. Fuel Processing Technology. 106 (2), 95-101 (2013).
  18. Benk, A., Coban, A. Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze. Fuel Processing Technology. 92 (5), 1078-1086 (2011).
  19. Zhao, H. B., Yin, G. Z. Study of acoustic emission characteristics and damage equation of coal containing gas. Rock and Soil Mechanics. 32 (3), 667-671 (2011).
  20. Cao, S. G., Li, Y., Guo, P., Bai, Y. J., Liu, Y. B. Comparative research on permeability characteristics in complete stress-strain process of briquette and coal samples. Chinese Journal of Rock Mechanics and Engineering. 29 (5), 899-906 (2010).
  21. Wang, H. P., et al. Development of a similar material for methane-bearing coal and its application to outburst experiment. Rock and Soil Mechanics. 36 (6), 1676-1682 (2015).
  22. Ulusay, R. . The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007-2014. , (2015).
  23. Ranathunga, A. S., Perera, M. S. A., Ranjith, P. G. Influence of CO2 adsorption on the strength and elastic modulus of low rank Australian coal under confining pressure. International Journal of Coal Geology. 167, 148-156 (2016).
  24. Ranjith, P. G., Perera, M. S. A. Effects of cleat performance on strength reduction of coal in CO2, sequestration. Energy. 45 (1), 1069-1075 (2012).
  25. Masoudian, M. S., Airey, D. W., El-Zein, A. Experimental investigations on the effect of CO2, on mechanics of coal. International Journal of Coal Geology. 128 (3), 12-23 (2014).
  26. Wang, S. G., Elsworth, D., Liu, J. S. Rapid decompression and desorption induced energetic failure in coal. Journal of Rock Mechanics and Geotechnical Engineering. 7 (3), 345-350 (2015).
  27. Hadi Mosleh, M., Turner, M., Sedighi, M., Vardon, P. J. Carbon dioxide flow and interactions in a high rank coal: Permeability evolution and reversibility of reactive processes. International Journal of Greenhouse Gas Control. 70, 57-67 (2018).
  28. Abhijit, M., Harpalani, S., Liu, S. M. Laboratory measurement and modeling of coal permeability with continued methane production: Part 1 – Laboratory results. Fuel. 94 (1), 110-116 (2012).
  29. Li, Q. C., et al. Development and application of a gas-solid coupling test system in the visualized and constant volume loading state. Journal of China University of Mining & Technology. 47 (1), 104-112 (2018).
  30. Allen, T. . Particle Size Measure. , (1984).
  31. Wang, H. P., et al. Coal and gas outburst simulation system based on CRISO model. Chinese Journal of Rock Mechanics and Engineering. 34 (11), 2301-2308 (2015).
  32. Zhang, Q. H., et al. Exploration of similar gas like methane in physical simulation test of coal and gas outburst. Rock and Soil Mechanics. 38 (2), 479-486 (2017).
  33. Xia, G. Z. . Study on density and refractive index of near-critical fluid. , (2009).
  34. Ruppel, T. C., Grein, C. T., Bienstock, D. Adsorption of methane on dry coal at elevated pressure. Fuel. 53 (3), 152-162 (1974).
  35. Ranjith, P. G., Jasinge, D., Choi, S. K., Mehic, M., Shannon, B. The effect of CO2 saturation on mechanical properties of Australian black coal using acoustic emission. Fuel. 89 (8), 2110-2117 (2010).
  36. Viete, D. R., Ranjith, P. G. The effect of CO2, on the geomechanical and permeability behaviour of brown coal: Implications for coal seam CO2 sequestration. International Journal of Coal Geology. 66 (3), 204-216 (2006).
  37. Jiang, Y. D., Zhu, J., Zhao, Y. X., Liu, J. H., Wang, H. W. Constitutive equations of coal containing methane based on mixture theory. Journal of China Coal Society. 32 (11), 1132-1137 (2007).
  38. Xie, H. P., Gao, F., Zhou, H. W., Zuo, J. P. Fractal fracture and fragmentation in rocks. Journal of Seismology. 23 (4), 1-9 (2003).
  39. Miao, T. J., Yu, B. M., Duan, Y. G., Fang, Q. T. A fractal analysis of permeability for fractured rocks. International Journal of Heat & Mass Transfer. 81 (81), 75-80 (2015).
  40. Liu, R. C., Jiang, Y. J., Li, B., Wang, X. S. A fractal model for characterizing fluid flow in fractured rock masses based on randomly distributed rock fracture networks. Computers & Geotechnics. 65, 45-55 (2015).
  41. Pan, J. N., et al. Micro-pores and fractures of coals analysed by field emission scanning electron microscopy and fractal theory. Fuel. 164, 277-285 (2016).
check_url/it/59405?article_type=t

Play Video

Citazione di questo articolo
Hou, W., Wang, H., Wang, W., Liu, Z., Li, Q. A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System. J. Vis. Exp. (148), e59405, doi:10.3791/59405 (2019).

View Video