Summary

ハイブリッド原子間力顕微鏡走査型電気化学顕微鏡(AFM-SECM)を用いたナノ材料の表面電気化学的活性の調査

Published: February 10, 2021
doi:

Summary

原子間力顕微鏡(AFM)とスキャン電気化学顕微鏡(SECM)、すなわちAFM-SECMを組み合わせることで、ナノスケールで材料表面の高解像度の地形情報や電気化学的情報を同時に取得することができます。このような情報は、ナノ材料、電極、生体材料の局所的な表面上の異種特性(反応性、欠陥、反応部位など)を理解するために重要です。

Abstract

走査電気化学顕微鏡(SECM)は液体/固体、液体/気体および液体/液体/液体の界面の局所的な電気化学的挙動を測定するために使用される。原子間力顕微鏡(AFM)は、地形と機械的特性の点で微細構造とナノ構造を特徴付けるための汎用性の高いツールです。しかし、従来のSECMまたはAFMは、ナノスケールで電気的または電気化学的特性に関する限定的に解決された情報を提供します。例えば、結晶面レベルでのナノ材料表面の活性は、従来の電気化学法では解決が困難である。この論文では、AFMとSECMの組み合わせ、すなわちAFM-SECMを組み合わせてナノスケールの表面電気化学活性を探査し、高解像度の地形データを取得する方法を報告する。このような測定は、ナノ構造と反応活性の関係を理解するために重要であり、材料科学、生命科学、化学プロセスにおける幅広い用途に関連しています。組み合わされたAFM-SECMの多様性は、ファセットナノ粒子(NPs)とナノバブル(NB)の地形および電気化学的特性をそれぞれマッピングすることによって実証される。ナノ構造の以前に報告されたSECMイメージングと比較して、このAFM-SECMは、表面マッピングの高解像度で局所的な表面活性または反応性の定量的評価を可能にする。

Introduction

電気化学(EC)行動の特性評価は、生物学1、2、エネルギー3、4、材料合成5、6、7、および化学プロセス8、9など、多様な分野における界面反応の動態およびメカニズムに関する重要な洞察を提供することができる。電気化学的インピーダンス分光法10、電気化学的ノイズ法11、ガルバノスタティック間断滴定12、および環式ボルタンメトリー13を含む従来のEC測定は、通常、巨視的規模で行われ、表面平均応答を提供する。したがって、電気化学的活性が表面に分布する方法に関する情報を抽出することは困難ですが、ナノ材料が広く使用されている場合、ナノスケールの局所的なスケール表面特性は特に重要です。したがって、ナノスケールの多次元情報と電気化学の両方を同時に捕捉できる新しい技術が非常に望ましい。

走査電気化学顕微鏡(SECM)は、物質の局所的な電気化学的活性をマイクロスケールおよびナノスケール14で測定するために広く用いられている技術である。典型的には、SECMは、サンプル表面をスキャンして局所的な電気化学的性質15を空間的に解決する際に、電気活性化学種を検出するためのプローブとして超マイクロ電極を使用する。プローブで測定された電流は、メディエータ種の還元(または酸化)によって生成され、この電流はサンプルの表面における電気化学的反応性の指標です。SECMは1989年16年の最初の創設後に大きく進化しましたがまだ2つの主な制限によって挑戦されています。EC信号は通常、チップ基板相互作用特性に敏感であるため、SECMの1つの制限は、プローブを一定の高さで保つことで、電気化学的活性と表面景観の直接的な相関を防ぐことであり、収集されたEC情報18との地形の畳み込みに起因する。第2に、商用SECMシステムが、マイクロメータスケール19にあるプローブ寸法によって空間分解能が部分的に決定されるので、サブマイクロメータ(μm)画像解像度を得ることは困難である。したがって、ナノ電極は、ナノメートル範囲の直径を有する電極を、サブマイクロメートルスケール20、21、22、23以下の解像度を達成するためにSECMでますます使用されている。

一定の先端基板距離制御を提供し、より高い空間電気化学的分解能を得るために、SECMのいくつかのハイブリッド技術、例えばイオン伝導位置24、せん断力位置決め25、交流電流SECM26、原子間力顕微鏡(AFM)位置決めなどが用いられている。これらの計測器の中で、SECM統合AFM測位(AFM-SECM)は非常に有望なアプローチとなっています。AFMは固定された先端基板距離を提供することができるので、統合されたAFM-SECM技術は、鋭いAFM先端を用いたマッピングまたはサンプルスイープを通じてナノスケール表面構造および電気化学的情報を同時に取得することができます。1996年27年にマクファーソンとアンウィンによるAFM-SECMの初の運用に成功して以来、プローブの設計と製造、および化学および生物学的プロセスにおける電気化学などの様々な研究分野での応用に大きな改善が達成されました。例えば、AFM-SECMは、貴金属ナノ粒子28のような複合材料表面をイメージングするために実施されている、機能的または寸法的に安定した電極29、30、及び電子機器31。AFM-SECMは先端の現在のイメージから電気化学的に活動的なサイトを地図化できる。

同時の地形および電気化学的測定は、導電性AFM 32、33、34、35、電気化学AFM(EC-AFM)36、37、38、39、走査イオンなどの他の技術によっても達成することができた。 伝導顕微鏡走査電気化学顕微鏡(SICM-SECM)24、40、及び走査電気化学細胞顕微鏡(SECCM)41、42これらの技術間の比較は、レビューペーパー1で議論されている。本研究の目的は、SECM-AFMを用いて、水中のファセット結晶性酸化カップルースナノ材料およびナノバブルに関する電気化学的マッピングと測定を実証することであった。ファセットナノ材料は、独特の結晶構造特徴を持つファセットが独特の表面原子構造を有し、さらにそれらの触媒特性を支配するため、クリーンエネルギー用途における金属酸化物触媒のために広く合成される。また、金質基板上の表面ナノバブル(NB)の液体/気体界における電気化学的挙動を測定し、比較しました。NBは、直径<1μm(超微細気泡とも呼ばれる)43の気泡であり、溶液46、47、ガス質量移動46、48の高い滞留時間を含む多くの興味深い特性44、45を引き出す。さらに、NBsの崩壊は衝撃波を作り出し、ヒドロキシルラジカル(•OH)49、50、51、52の形成を行溶液中の酸素NBの電気化学的反応性を測定し、NBの基本的な化学的性質をよりよく理解しました。

Protocol

1. サンプル準備 シリコン基板上のファセットCu2Oナノ粒子と堆積物の調製 溶解 0.175 g の CuCl2の 2 H2O (99.9%)100 mL の脱イオン(DI)水に入れ、10 mMCuCl2の水溶液を生成します。 CuCl2 溶液に10.0 mLの2.0 M NaOHと0.6 Mアスコルビン酸滴下の10 mLを加えます。 55°Cの水浴で一定の攪拌の下で250 mLラウンドボトムフラスコに溶液…

Representative Results

AFM-SECMによるONBの地形と現在のイメージング AFMを有するNBsを特徴付けた以前の研究では、固体基板56,57に固定化されたNBのサイズと分布を明らかにするために、地形画像のみを報告した。ここでの実験は、形態学的および電気化学的情報の両方を明らかにした。図9では、個々の酸素ナノバブル…

Discussion

このプロトコルでは、高解像度のマルチモーダルイメージングを可能にするAFM-SECM技術を組み合わせて説明した。この技術により、単一ナノ粒子またはナノバブル上で収集またはマッピングされたSECM電流と同時に地形をマッピングすることができます。実験は市販のプローブを用いて行った。これらのプローブは、電気化学的環境、電気化学的性能、機械的安定性、および多サイクル処理<sup…

Divulgazioni

The authors have nothing to disclose.

Acknowledgements

この研究は、米国科学財団(賞番号:1756444)が、ナノ材料の生物学的および環境インターフェース、USDA国立食品農業研究所、AFRIプロジェクト[2018-07549]、米国環境保護庁がニュージャージー工科大学に授与する支援協定第83945101-0によって資金提供されています。EPAによって正式に審査されていない。この文書に記載されている見解は、著者のものであり、必ずしも機関の見解を反映しているわけではありません。EPAは、本書に記載されている製品や商用サービスを保証するものではありません。著者らはまた、ニュージャージー工科大学の学部研究イノベーションプログラム(URI)フェーズ1とフェーズ2に感謝します。

Materials

Equipment
Atomic force microsopy Bruker, CA Dimenison Icon
Bipotentiostat CH Instruments, Inc. CHI 700E
Materials
Silicon wafer TED PELLA, Inc. 16013
Fresh gold plates Bruker, CA model 119-017-307
PF-SECM-AFM probes Bruker, CA 990-050138
PF-SECM strain-release module Bruker, CA 840-012-724
PF-SECM Probe Holder Bruker, CA 900-050121
PF-SECM Chuck Bruker, CA PF-SECM Chuck
PF-SECM O-ring Bruker, CA 598-000-106
PF-SECM cover glass, SECM Cell Bruker, CA 900-050137
EC Cell Assy Bruker, CA 932-017-300
ESD Field Service Bruker, CA 490-000-066
PF-SECM Boot Bruker, CA 900-050136
Spring connector block Bruker, CA 900-050524
PFSECM Tweezers Bruker, CA
Cable, SECM Tip module Bruker, CA 468-050171
Ag wire Bruker, CA 249-000-056
Pt wire Bruker, CA 248-000-004
Hard sharp wire Bruker, CA TT-ECM10
Tubular ceramic membrane Refracton WFA0.1
Chemicals
Copper(II) chloride dihydrate ACROS Organics AC315281000
Sodium Hydroxide Fisher Chemical S318-100
Ascorbic Acid Fisher Chemical A61-25
Epoxy Loctite Instant Mix
Potassium Chloride Fisher Chemical P217-500
Hexaammineruthenium(III) chloride ACROS Organics AC363342500

Riferimenti

  1. Shi, X., Qing, W., Marhaba, T., Zhang, W. Atomic Force Microscopy-Scanning Electrochemical Microscopy (AFM-SECM) for Nanoscale Topographical and Electrochemical Characterization: Principles, Applications and Perspectives. Electrochimica Acta. , 135472 (2019).
  2. Aazam, E. S., Ghoneim, M. M., El-Attar, M. A. Synthesis, characterization, electrochemical behavior, and biological activity of bisazomethine dye derived from 2, 3-diaminomaleonitrile and 2-hydroxy-1-naphthaldehyde and its zinc complex. Journal of Coordination Chemistry. 64 (14), 2506-2520 (2011).
  3. Shukla, A., Sampath, S., Vijayamohanan, K. Electrochemical supercapacitors: Energy storage beyond batteries. Current science. 79 (12), 1656-1661 (2000).
  4. Kötz, R., Carlen, M. Principles and applications of electrochemical capacitors. Electrochimica Acta. 45 (15-16), 2483-2498 (2000).
  5. Botte, G. G. Electrochemical manufacturing in the chemical industry. The Electrochemical Society Interface. 23 (3), 49-55 (2014).
  6. Kongsricharoern, N., Polprasert, C. Electrochemical precipitation of chromium (Cr6+) from an electroplating wastewater. Water Science and Technology. 31 (9), 109-117 (1995).
  7. Datta, M., Landolt, D. Fundamental aspects and applications of electrochemical microfabrication. Electrochimica Acta. 45 (15-16), 2535-2558 (2000).
  8. Wang, S., George, K., Nesic, S. High pressure CO2 corrosion electrochemistry and the effect of acetic acid. Corrosion/2004. 4375, (2004).
  9. Song, G. L. . Corrosion of Magnesium alloys. , 3-65 (2011).
  10. Bellezze, T., Giuliani, G., Viceré, A., Roventi, G. Study of stainless steels corrosion in a strong acid mixture. Part 2: anodic selective dissolution, weight loss and electrochemical impedance spectroscopy tests. Corrosion Science. 130, 12-21 (2018).
  11. Ehsani, A., et al. Evaluation of Thymus vulgaris plant extract as an eco-friendly corrosion inhibitor for stainless steel 304 in acidic solution by means of electrochemical impedance spectroscopy, electrochemical noise analysis and density functional theory. Journal of Colloid and Interface Science. 490, 444-451 (2017).
  12. Cui, Z. H., Guo, X. X., Li, H. Equilibrium voltage and overpotential variation of nonaqueous Li-O2 batteries using the galvanostatic intermittent titration technique. Energy & Environmental Science. 8 (1), 182-187 (2015).
  13. Elgrishi, N., et al. A Practical Beginner’s Guide to Cyclic Voltammetry. Journal of Chemical Education. 95 (2), 197-206 (2018).
  14. Amemiya, S., Bard, A. J., Fan, F. R. F., Mirkin, M. V., Unwin, P. R. Scanning Electrochemical Microscopy. Annual Review of Analytical Chemistry. 1 (1), 95-131 (2008).
  15. Mirkin, M. V., Nogala, W., Velmurugan, J., Wang, Y. Scanning electrochemical microscopy in the 21st century. Update 1: five years after. Physical Chemistry Chemical Physics. 13 (48), 21196-21212 (2011).
  16. Bard, A. J., Fan, F. R. F., Kwak, J., Lev, O. Scanning electrochemical microscopy. Introduction and principles. Analytical Chemistry. 61 (2), 132-138 (1989).
  17. Engstrom, R. C., Pharr, C. M. Scanning electrochemical microscopy. Analytical Chemistry. 61 (19), 1099-1104 (1989).
  18. Nellist, M. R., et al. Atomic force microscopy with nanoelectrode tips for high resolution electrochemical, nanoadhesion and nanoelectrical imaging. Nanotechnology. 28 (9), 095711 (2017).
  19. Patel, A. N., Kranz, C. (Multi) functional atomic force microscopy imaging. Annual Review of Analytical Chemistry. 11, 329-350 (2018).
  20. Ufheil, J., Heß, C., Borgwarth, K., Heinze, J. Nanostructuring and nanoanalysis by scanning electrochemical microscopy (SECM). Physical Chemistry Chemical Physics. 7 (17), 3185-3190 (2005).
  21. Bergner, S., Wegener, J., Matysik, F. M. Simultaneous imaging and chemical attack of a single living cell within a confluent cell monolayer by means of scanning electrochemical microscopy. Analytical Chemistry. 83 (1), 169-174 (2011).
  22. Hu, K., et al. Platinized carbon nanoelectrodes as potentiometric and amperometric SECM probes. Journal of Solid State Electrochemistry. 17 (12), 2971-2977 (2013).
  23. Kranz, C. Recent advancements in nanoelectrodes and nanopipettes used in combined scanning electrochemical microscopy techniques. Analyst. 139 (2), 336-352 (2014).
  24. Morris, C. A., Chen, C. C., Baker, L. A. Transport of redox probes through single pores measured by scanning electrochemical-scanning ion conductance microscopy (SECM-SICM). Analyst. 137 (13), 2933-2938 (2012).
  25. Ludwig, M., Kranz, C., Schuhmann, W., Gaub, H. E. Topography feedback mechanism for the scanning electrochemical microscope based on hydrodynamic forces between tip and sample. Review of Scientific Instruments. 66 (4), 2857-2860 (1995).
  26. Eckhard, K., Schuhmann, W. Alternating current techniques in scanning electrochemical microscopy (AC-SECM). Analyst. 133 (11), 1486-1497 (2008).
  27. Macpherson, J. V., Unwin, P. R., Hillier, A. C., Bard, A. J. In-situ imaging of ionic crystal dissolution using an integrated electrochemical/AFM probe. Journal of the American Chemical Society. 118 (27), 6445-6452 (1996).
  28. Huang, K., Anne, A., Bahri, M. A., Demaille, C. Probing Individual Redox PEGylated Gold Nanoparticles by Electrochemical-Atomic Force Microscopy. ACS Nano. 7 (5), 4151-4163 (2013).
  29. Chennit, K., et al. Electrochemical Imaging of Dense Molecular Nanoarrays. Analytical Chemistry. 89 (20), 11061-11069 (2017).
  30. Jiang, J., et al. Nanoelectrical and Nanoelectrochemical Imaging of Pt/p-Si and Pt/p+-Si Electrodes. ChemSusChem. 10 (22), 4657-4663 (2017).
  31. Knittel, P., Mizaikoff, B., Kranz, C. Simultaneous nanomechanical and electrochemical mapping: combining peak force tapping atomic force microscopy with scanning electrochemical microscopy. Analytical Chemistry. 88 (12), 6174-6178 (2016).
  32. Quist, A. P., et al. Atomic force microscopy imaging and electrical recording of lipid bilayers supported over microfabricated silicon chip nanopores: Lab-on-a-chip system for lipid membranes and ion channels. Langmuir. 23 (3), 1375-1380 (2007).
  33. Cohen, H., et al. Electrical characterization of self-assembled single- and double-stranded DNA monolayers using conductive AFM. Faraday Discussions. 131, 367-376 (2006).
  34. Chung, J. W., et al. Single-crystalline organic nanowires with large mobility and strong fluorescence emission: a conductive-AFM and space-charge-limited-current study. Journal of Materials Chemistry. 19 (33), 5920-5925 (2009).
  35. Guo, D. Z., Hou, S. M., Zhang, G. M., Xue, Z. Q. Conductance fluctuation and degeneracy in nanocontact between a conductive AFM tip and a granular surface under small-load conditions. Applied Surface Science. 252 (14), 5149-5157 (2006).
  36. Rocca, E., Bertrand, G., Rapin, C., Labrune, J. C. Inhibition of copper aqueous corrosion by non-toxic linear sodium heptanoate: mechanism and ECAFM study. Journal of Electroanalytical Chemistry. 503 (1), 133-140 (2001).
  37. Toma, F. M., et al. Mechanistic insights into chemical and photochemical transformations of bismuth vanadate photoanodes. Nature Communications. 7, 12012 (2016).
  38. Kouzeki, T., Tatezono, S., Yanagi, H. Electrochromism of Orientation-Controlled Naphthalocyanine Thin Films. The Journal of Physical Chemistry. 100 (51), 20097-20102 (1996).
  39. Yamaguchi, Y., Shiota, M., Nakayama, Y., Hirai, N., Hara, S. Combined in situ EC-AFM and CV measurement study on lead electrode for lead-acid batteries. Journal of Power Sources. 93 (1), 104-111 (2001).
  40. Comstock, D. J., Elam, J. W., Pellin, M. J., Hersam, M. C. Integrated Ultramicroelectrode-Nanopipet Probe for Concurrent Scanning Electrochemical Microscopy and Scanning Ion Conductance Microscopy. Analytical Chemistry. 82 (4), 1270-1276 (2010).
  41. Ebejer, N., Schnippering, M., Colburn, A. W., Edwards, M. A., Unwin, P. R. Localized High Resolution Electrochemistry and Multifunctional Imaging: Scanning Electrochemical Cell Microscopy. Analytical Chemistry. 82 (22), 9141-9145 (2010).
  42. Ebejer, N., et al. Scanning Electrochemical Cell Microscopy: A Versatile Technique for Nanoscale Electrochemistry and Functional Imaging. Annual Review of Analytical Chemistry. 6 (1), 329-351 (2013).
  43. Alheshibri, M., Qian, J., Jehannin, M., Craig, V. S. A history of nanobubbles. Langmuir. 32 (43), 11086-11100 (2016).
  44. Liu, G., Wu, Z., Craig, V. S. Cleaning of protein-coated surfaces using nanobubbles: an investigation using a quartz crystal microbalance. The Journal of Physical Chemistry C. 112 (43), 16748-16753 (2008).
  45. Ghadimkhani, A., Zhang, W., Marhaba, T. Ceramic membrane defouling (cleaning) by air Nano Bubbles. Chemosphere. 146, 379-384 (2016).
  46. Uchida, T., et al. Transmission electron microscopic observations of nanobubbles and their capture of impurities in wastewater. Nanoscale Research Letters. 6 (1), 1 (2011).
  47. Ushikubo, F. Y., et al. Evidence of the existence and the stability of nano-bubbles in water. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 361 (1-3), 31-37 (2010).
  48. Bowley, W. W., Hammond, G. L. Controlling factors for oxygen transfer through bubbles. Industrial, Engineering Chemistry Process Design and Development. 17 (1), 2-8 (1978).
  49. Li, P., Takahashi, M., Chiba, K. Enhanced free-radical generation by shrinking microbubbles using a copper catalyst. Chemosphere. 77 (8), 1157-1160 (2009).
  50. Takahashi, M., et al. Effect of shrinking microbubble on gas hydrate formation. The Journal of Physical Chemistry B. 107 (10), 2171-2173 (2003).
  51. Takahashi, M., Chiba, K., Li, P. Free-radical generation from collapsing microbubbles in the absence of a dynamic stimulus. The Journal of Physical Chemistry B. 111 (6), 1343-1347 (2007).
  52. Ahmed, A. K. A., et al. Influences of air, oxygen, nitrogen, and carbon dioxide nanobubbles on seed germination and plant growth. Journal of Agricultural and Food Chemistry. 66 (20), 5117-5124 (2018).
  53. Zhang, D. F., et al. Delicate control of crystallographic facet-oriented Cu 2 O nanocrystals and the correlated adsorption ability. Journal of Materials Chemistry. 19 (29), 5220-5225 (2009).
  54. Khaled Abdella Ahmed, A., et al. Colloidal Properties of Air, Oxygen, and Nitrogen Nanobubbles in Water: Effects of Ionic Strength, Natural Organic Matters, and Surfactants. Environmental Engineering Science. , (2017).
  55. Huang, Z., et al. PeakForce scanning electrochemical microscopy with nanoelectrode probes. Microscopy Today. 24 (6), 18-25 (2016).
  56. Lou, S. T., et al. Nanobubbles on solid surface imaged by atomic force microscopy. Journal of Vacuum Science, Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena. 18 (5), 2573-2575 (2000).
  57. Borkent, B. M., Dammer, S. M., Schönherr, H., Vancso, G. J., Lohse, D. Superstability of surface nanobubbles. Physical Review Letters. 98 (20), 204502 (2007).
  58. Agarwal, A., Ng, W. J., Liu, Y. Principle and applications of microbubble and nanobubble technology for water treatment. Chemosphere. 84 (9), 1175-1180 (2011).
  59. Tasaki, T., Wada, T., Baba, Y., Kukizaki, M. Degradation of surfactants by an integrated nanobubbles/VUV irradiation technique. Industrial & Engineering Chemistry Research. 48 (9), 4237-4244 (2009).
  60. Fujita, D., Itoh, H., Ichimura, S., Kurosawa, T. Global standardization of scanning probe microscopy. Nanotechnology. 18 (8), 084002 (2007).
  61. Häßler-Grohne, W., Hüser, D., Johnsen, K. P., Frase, C. G., Bosse, H. Current limitations of SEM and AFM metrology for the characterization of 3D nanostructures. Measurement Science and Technology. 22 (9), 094003 (2011).
  62. Sakai, K. . Measurement Techniques and Practices of Colloid and Interface Phenomena. , 51-57 (2019).
  63. Gan, T., Wu, B., Zhou, X., Zhang, G. Ultrahigh resolution, serial fabrication of three dimensionally-patterned protein nanostructures by liquid-mediated non-contact scanning probe lithography. RSC Advances. 6 (55), 50331-50335 (2016).
  64. Arteaga, J. F., et al. Comparison of the simple cyclic voltammetry (CV) and DPPH assays for the determination of antioxidant capacity of active principles. Molecules. 17 (5), 5126-5138 (2012).
  65. Moreno-Herrero, F., Colchero, J., Gomez-Herrero, J., Baro, A. Atomic force microscopy contact, tapping, and jumping modes for imaging biological samples in liquids. Physical Review E. 69 (3), 031915 (2004).
  66. Doktycz, M., et al. AFM imaging of bacteria in liquid media immobilized on gelatin coated mica surfaces. Ultramicroscopy. 97 (1-4), 209-216 (2003).
check_url/it/61111?article_type=t

Play Video

Citazione di questo articolo
Shi, X., Ma, Q., Marhaba, T., Zhang, W. Probing Surface Electrochemical Activity of Nanomaterials using a Hybrid Atomic Force Microscope-Scanning Electrochemical Microscope (AFM-SECM). J. Vis. Exp. (168), e61111, doi:10.3791/61111 (2021).

View Video