Rivista
/
Ingegneria
/
In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells
JoVE Journal
Ingegneria
This content is Free Access.
JoVE Journal Ingegneria
In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

DOI:
10.3791/55897-v

•

09:19 min

•

October 03, 2018

•

, , , , , ,
1TNO Solliance,Thin Film Technology, 2Eternal Sun, 3Hielkema Testequipment, 4Institut des Matériaux Jean Rouxel (IMN)-UMR 6502,Université de Nantes, CNRS, 5ReRa Solutions BV, 6Institute of Molecules and Materials,Radboud University

Capitoli

  • 00:04Titolo
  • 01:03Thin Film Cu(In,Ga)Se2 (CIGS) Solar Cell Fabrication
  • 04:06CIGS Solar Cell Degradation Testing by Combined Stress Tests with In Situ Measurements (CSI)
  • 07:34Results: Examples of Temperature Dependency Determination and CIGS Solar Cell Degradation Trends
  • 08:55Conclusion

Summary

Traduzione automatica

Traduzione automatica

Two 'Combined Stress test with in situ measurement' setups, which allow real-time monitoring of accelerated degradation of solar cells and modules, were designed and constructed. These setups allow the simultaneous use of humidity, temperature, electrical biases, and illumination as independently controlled stress factors. The setups and various experiments executed are presented.

Tags

In Situ MonitoringAccelerated Performance DegradationSolar CellsCu(InGa)Se2 Solar CellsReliability TestingCombined StressesReal-time Performance MeasurementDegradation MechanismsMolybdenumCIGS Absorber LayerCadmium SulfideZinc OxideGold ContactsCurrent-voltage Performance

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

check_url/it/55897?article_type=v

Atom Probe Tomography Studies on the Cu(In,Ga)Se2 Grain Boundaries
check_url/it/55897?article_type=v

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
check_url/it/55897?article_type=v

Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing
check_url/it/55897?article_type=v

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
check_url/it/55897?article_type=v

Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells
check_url/it/55897?article_type=v

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells
check_url/it/55897?article_type=v

Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells
check_url/it/55897?article_type=v

Well-aligned Vertically Oriented ZnO Nanorod Arrays and their Application in Inverted Small Molecule Solar Cells
check_url/it/55897?article_type=v

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics
check_url/it/55897?article_type=v

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Read Article