Rivista
/
Ingegneria
/
Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

DOI:
10.3791/56494-v

•

08:50 min

•

November 28, 2017

•

, , ,
1Graduate Institute of Electronics Engineering,National Taiwan University, 2Research Center for Applied Sciences,Academia Sinica, 3Graduate Institute of Photonics and Optoelectronics,National Taiwan University

Capitoli

  • 00:05Titolo
  • 00:47WS2/MoS2Vertical Heterostructure Growth
  • 03:49Transition Metal Dichalcogenide (TMD) Thin Film Transfer
  • 06:21Results: Growth Mechanisms and Transistor Performance
  • 08:11Conclusion

Summary

Traduzione automatica

Traduzione automatica

Through the sulfurization of pre-deposited transition metals, large-area and vertical 2D crystal hetero-structures can be fabricated. The film transferring and device fabrication procedures are also demonstrated in this report.

Tags

2D Crystal HeterostructuresVertical 2D MaterialsSulfurizationTransition Metal FilmsDevice FabricationRF SputteringSapphire SubstrateMolybdenum TargetSulfur PowderTube FurnaceArgon GasMolybdenum DisulfideTungsten Target

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

Preparation of Liquid-exfoliated Transition Metal Dichalcogenide Nanosheets with Controlled Size and Thickness: A State of the Art Protocol

Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation

Orientational Transition in a Liquid Crystal Triggered by the Thermodynamic Growth of Interfacial Wetting Sheets

Preparation of Liquid Crystal Networks for Macroscopic Oscillatory Motion Induced by Light

Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications

Fused Filament Fabrication (FFF) of Metal-Ceramic Components

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Read Article