Rivista
/
Ingegneria
/
Effective Analysis of Human Exposure Conditions with Body-worn Dosimeters in the 2.4 GHz Band
JoVE Journal
Ingegneria
This content is Free Access.
JoVE Journal Ingegneria
Effective Analysis of Human Exposure Conditions with Body-worn Dosimeters in the 2.4 GHz Band

Effective Analysis of Human Exposure Conditions with Body-worn Dosimeters in the 2.4 GHz Band

DOI:
10.3791/56525-v

•

06:43 min

•

May 02, 2018

•

, ,
1Telemedicine and e-Health Research Unit,Instituto de Salud Carlos III, 2Signal Theory and Communications, and Telematic Engineering Department,Universidad de Valladolid

Capitoli

  • 00:04Titolo
  • 00:50Fixing the Position of the Measuring Device
  • 02:39The Radiation Source and Measurement Methodology
  • 04:19Results: Comparison of Data Measured in Two Enclosures
  • 05:42Conclusion

Summary

Traduzione automatica

Traduzione automatica

This study describes a protocol to measure exposure levels in the 2.4 GHz band, avoiding the uncertainties caused by the use of personal exposimeters as measuring devices. These alterations of the exposure levels should be taken into account, especially in compliance testing, where exposure limits are defined from non-perturbed data.

Tags

Exposure MeasurementDosimeters2.4 GHz BandBody ShadowingExposimetersRegulatory ComplianceUnperturbed Exposure ConditionsIndoor EnclosureRadiation SourceTest SubjectLumbar AreaWaist HeightCarton TubeShoulder HeightWalking SpeedData Collection

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

check_url/it/56525?article_type=v

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
check_url/it/56525?article_type=v

A Cost-effective and Reliable Method to Predict Mechanical Stress in Single-use and Standard Pumps
check_url/it/56525?article_type=v

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions
check_url/it/56525?article_type=v

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis
check_url/it/56525?article_type=v

In Situ Visualization of the Phase Behavior of Oil Samples Under Refinery Process Conditions
check_url/it/56525?article_type=v

A Novel Biaxial Testing Apparatus for the Determination of Forming Limit under Hot Stamping Conditions
check_url/it/56525?article_type=v

High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis
check_url/it/56525?article_type=v

Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions
check_url/it/56525?article_type=v

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
check_url/it/56525?article_type=v

Quantitative Analysis by Thermogravimetry-Mass Spectrum Analysis for Reactions with Evolved Gases

Read Article