Rivista
/
Ingegneria
/
Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars

DOI:
10.3791/57859-v

•

10:24 min

•

November 01, 2018

•

, , ,
1Department of Civil Engineering,Shenzhen University, 2Guangdong Province Key Laboratory of Durability for Marine Civil Engineering,Shenzhen University, 3Department of Engineering and the Built Environment,Anglia Ruskin University

Capitoli

  • 00:04Titolo
  • 01:15Initial Specimen Testing
  • 05:00Specimen Corrosion and Subsequent Testing
  • 07:41Results: Comparison of Measurement Methods
  • 09:14Conclusion

Summary

Traduzione automatica

Traduzione automatica

This paper measures the geometry and the amount of corrosion of a steel bar using different methods: mass loss, calipers, drainage measurements, 3D scanning, and X-ray micro-computed tomography (XCT).

Tags

Corrosion MeasurementSteel BarSurface Morphology3D ScanningXCTVernier CaliperDrainage MeasurementMass LossCross-sectionUniversal Testing Machine

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

check_url/it/57859?article_type=v

Mechanical Expansion of Steel Tubing as a Solution to Leaky Wellbores
check_url/it/57859?article_type=v

Blast Quantification Using Hopkinson Pressure Bars
check_url/it/57859?article_type=v

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials
check_url/it/57859?article_type=v

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation
check_url/it/57859?article_type=v

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight
check_url/it/57859?article_type=v

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes
check_url/it/57859?article_type=v

Subsurface Defect Localization by Structured Heating Using Laser Projected Photothermal Thermography
check_url/it/57859?article_type=v

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel
check_url/it/57859?article_type=v

Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior
check_url/it/57859?article_type=v

Generating Lap Joints Via Friction Stir Spot Welding on DP780 Steel

Read Article