Rivista
/
Ingegneria
/
Fabrication of Microscope Stage for Vertical Observation with Temperature Control Function
JoVE Journal
Ingegneria
È necessario avere un abbonamento a JoVE per visualizzare questo.  Accedi o inizia la tua prova gratuita.
JoVE Journal Ingegneria
Fabrication of Microscope Stage for Vertical Observation with Temperature Control Function

Fabrication of Microscope Stage for Vertical Observation with Temperature Control Function

DOI:
10.3791/59799-v

•

06:21 min

•

July 31, 2019

•

, ,
1Department of Physics, Graduate School of Science,Tokyo University of Science

Capitoli

  • 00:04Titolo
  • 00:31Aluminum Plate Fabrication
  • 01:31Aluminum Pedestal, Pressed Cork Disc, and Silicone Rubber Heater Fabrication
  • 03:13System Configuration
  • 03:59Operation Method
  • 04:30Results: Representative Temperature Distribution and Signal Responsiveness and Diatom Motion Analysis
  • 05:28Conclusion

Summary

Traduzione automatica

Traduzione automatica

Presented here is a protocol using a temperature-controlled microscope stage that allows a sample container to be mounted on a vertical microscope.

Tags

Microscope StageVertical ObservationTemperature ControlAluminum PlatesLaser ProcessingClawsRubber BandsPedestalsPressed Cork DisksWater Jet CuttingSilicone Rubber Heater

Article

Embed

AGGIUNGI ALLA PLAYLIST

Usage Statistics

Video correlati

Fabrication of Gate-tunable Graphene Devices for Scanning Tunneling Microscopy Studies with Coulomb Impurities

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

High Temperature Fabrication of Nanostructured Yttria-Stabilized-Zirconia (YSZ) Scaffolds by In Situ Carbon Templating Xerogels

Study of Siphon Breaker Experiment and Simulation for a Research Reactor

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7−δ/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Single-Digit Nanometer Electron-Beam Lithography with an Aberration-Corrected Scanning Transmission Electron Microscope

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Read Article