/
/
Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices
È necessario avere un abbonamento a JoVE per visualizzare questo. Accedi o inizia la tua prova gratuita.
Capitoli
- 00:04Introduction
- 00:42Designing the Microscope Mask Alignment Adapter (MMAA)
- 01:29Creation of Bilayer Master Mold Using the MMAA (photolithography) and Determination of the Alignment Error
- 04:40Results: Design, Customization, and Characterization of the Master Molds Fabricated Using MMAA
- 05:44Conclusion
This project allows small laboratories to develop an easy-to-use platform for the fabrication of precise multilayer microfluidic devices. The platform consists of a three-dimensionally printed microscope mask alignment adapter using which multilayer microfluidic devices with alignment errors of <10 µm were achieved.
