This protocol shows how to perform cytoplasmic microinjection in farm animal zygotes. This technique can be used to deliver any solution into the one-cell embryo such as genome editing tools to generate knockout animals.
Cytoplasmic microinjection into one-cell embryos is a very powerful technique. As an example, it enables the delivery of genome editing tools that can create genetic modifications that will be present in every cell of an adult organism. It can also be used to deliver siRNA, mRNAs or blocking antibodies to study gene function in preimplantation embryos. The conventional technique for microinjecting embryos used in rodents consists of a very thin micropipette that directly penetrates the plasma membrane when advanced into the embryo. When this technique is applied to livestock animals it usually results in low efficiency. This is mainly because in contrast to mice and rats, bovine, ovine, and porcine zygotes have a very dark cytoplasm and a highly elastic plasma membrane that makes visualization during injection and penetration of the plasma membrane hard to achieve. In this protocol, we describe a suitable microinjection method for the delivery of solutions into the cytoplasm of cattle zygotes that has proved to be successful for sheep and pig embryos as well. First, a laser is used to create a hole in the zona pellucida. Then a blunt-end glass micropipette is introduced through the hole and advanced until the tip of the needle reaches about 3/4 into the embryo. Then, the plasma membrane is broken by aspiration of cytoplasmic content inside the needle. Finally, the aspirated cytoplasmic content followed by the solution of interest is injected back into the embryonic cytoplasm. This protocol has been successfully used for the delivery of different solutions into bovine and ovine zygotes with 100% efficiency, minimal lysis, and normal blastocysts development rates.
microinjection cytoplasmic של עוברי 1 תאים היא טכניקה רבת עוצמה. זה יכול לשמש להעברת כל פתרון לתוך העובר, למשל, לייצר הגן לדפוק-outs ללמוד תפקוד הגן או כדי ליצור חיות הגן בעריכה. רוב חקלאי-רלוונטי zygotes חוות חיות יש רכב חומצות שומן מאוד גבוה שגורם הציטופלסמה שלהם אטום וחשוך 1. יש להם גם קרום פלזמה אלסטי למדי (PM). תכונות אלו הופכות את microinjection באמצעות pronuclear קונבנציונלי / הזרקת ציטופלסמית כפי שמוצגת במינים מכרסמים מאתגרים ולעתים קרובות לא מדויקים.
יש microinjection cytoplasmic יתרונות על פני microinjection pronuclear שכן הוא קל יותר לבצע וגם גורם פחות נזק את העוברים מוזרק, וכתוצאה מכך כדאיות גבוהה 2. המטרה הכללית של פרוטוקול זה היא להדגים שיטה מוצלחת לאספקת פתרונות לתוך הציטופלסמה של zygotes חיות משק. כדי להיות מסוגל לבצעmicroinjection cytoplasmic עם יעילות גבוהה על עוברי בעלי חיים, לייזר משמש כדי ליצור חור המעטפת השקופה (ZP) ולאחר מכן מחט זכוכית קהה-end משמש microinjection. אסטרטגיה זו שואפת להקטין את נזק מכני המוטבע על העובר במהלך ההזרקה. לאחר מכן, שאיפה של תוכן ציטופלסמית בתוך המזרק מאפשרת שבירה יעילה ובטוחה של ראש הממשלה להבטיח כי הפתרון מועבר לתוך הציטופלסמה של העובר.
טכניקה זו כבר נוצלה בהצלחה בעוברי שור לספק siRNA לתוך הציטופלסמה zygotic 3,4 וליצור מוטציות באמצעות חזרות palindromic קצרות interspaced התקבצו באופן קבוע (CRISPR) / קשור CRISPR מערכת 9 (Cas9) מערכה 5. זה גם מתאים (עם שינויים קלים) להזרקת ביציות קומולוס סגורה שור 6. כאן אנו מתארים פרוטוקול ההזרקה שלנו ומספק צבע, שיכול לחול על הזרקת כל desפתרון IRED לתוך הזיגוטה, ולהראות כי באמצעות טכניקה זו גורמת תמוגה מינימלי ואינו להשפיע על התפתחות העובר המוקדם.
Microinjection של zygotes הוא שיטה מבוססת היטב מציגים פתרונות לעוברי יונקים. עם כמה וריאציות תלויות המין ואת מטרת הניסוי, טכניקה זו יכולה להיות בשימוש נרחב. אנו מראים כיצד לבצע microinjection intracytoplasmic באמצעות לייזר כדי לסייע בכניסה של micropipette בוטה לקצה. Zygotes של כמה מיני בעלי חיים (כמו ב?…
The authors have nothing to disclose.
Work related to this technique is supported by NIH/NICHD RO1 HD070044 and USDA/NIFA Hatch projects W-3171 and W-2112.
Micropipette puller | Sutter Instrument | P-97 | |
Glass capillary | Sutter instruments | B100-75-10 | These capillaries are used for making the holding and injecting pipettes. Any thick/standard wall borosilicate tubing without filament can be used. |
Microforge | Narishige | MF-9 | Equipped with 10X magnification lense. |
Micromanipulator | Nikon/ Narishige | NT88-V3 | |
Inverted microscope | Nikon | TE2000-U | Equipped with 4x, 20x lenses and with a laser system. |
Laser | Research Instruments | 7-47-500 | Saturn 5 Active laser. |
Microdispenser | Drummond | 3-000-105 | The microdispenser is used to move the embryos. A p10 pipette can also be used but loading as minimal volume as possible. |
60mm culture dish | Corning | 430166 | Use the lid of the dish to make the injection plate since they have lower walls and will make positioning and moving of the micropipettes with the micromanipulator easier. |
35mm culture dish | Corning | 430165 | These dishes are used for culturing the embryos in 50μl drops covered with mineral oil. Alternatively, a 4 well dish can also be used. Regardless of the dish chosen to culture the embryos, they always have to be equilibrated in the incubator for at least 4 hours prior to transfering the embryos to them. |
Incubator | Sanyo | MCO-19AIC | Any incubator that can be set to 38.5°C 5% CO2 conditions can be used. |
Stereomicroscope | Nikon | SMZ800 | Used for visualizing the embryos in the culture drops and during washes. Any stereomicroscope with a 10x magnification can be used. |
Control Unit HT | Minitube | 12055/0400 | Heating system attached to the stereomicroscope. |
Heated Microscope Stage | Minitube | 12055/0003 | Heating system attached to the stereomicroscope. |
Dextran-Red | Thermo Scientific | D1828 | A sterile 10mg/ml solution is used to inject. |
Mineral Oil | sigma | M8410 | Keep the mineral oil at room temperature and protected from light using foil paper. |
KSOMaa Evolve Bovine | Zenit | ZEBV-100 | Supplemented with 4mg/ml BSA. KSOM plates for embryo culture should be equilibrated in an incubator for at least 4 hours before use. |
FBS | Gemini-Bio | 100-525 | Use a stem-cell qualified FBS. |
Zygotes | Zygotes are injected 17-20 hpf and can be in-vitro- or in-vivo-derived. | ||
NaCl | Sigma | S5886 | Final concentration: 107.7mM. Component of SOF-HEPES medium. |
KCl | Sigma | P5405 | Final concentration: 7.16mM. Component of SOF-HEPES medium. |
KH2PO4 | Sigma | P5655 | Final concentration: 1.19mM. Component of SOF-HEPES medium. |
MgCL2 6H2O | Sigma | M2393 | Final concentration: 0.49mM. Component of SOF-HEPES medium. |
Sodium DL-lactate | Sigma | L4263 | Final concentration: 5.3mM. Component of SOF-HEPES medium. |
CaCl2-2H2O | Sigma | C7902 | Final concentration: 1.71mM. Component of SOF-HEPES medium. |
D-(−)-Fructose | Sigma | F3510 | Final concentration: 0.5mM. Component of SOF-HEPES medium. |
HEPES | Sigma | H4034 | Final concentration: 21mM. Component of SOF-HEPES medium. |
MEM-NEAA | Sigma | M7145 | Final concentration: 1X. Component of SOF-HEPES medium. |
BME-EAA | Sigma | B6766 | Final concentration: 1X. Component of SOF-HEPES medium. |
NaHCO3 | Sigma | S5761 | Final concentration: 4mM. Component of SOF-HEPES medium. |
Sodium pyruvate | Sigma | P4562 | Final concentration: 0.33mM. Component of SOF-HEPES medium. |
Glutamax | Gibco | 35050 | Final concentration: 1mM. Component of SOF-HEPES medium. |
BSA | Sigma | A-3311 | Final concentration: 1mg/ml. Component of SOF-HEPES medium. |
Gentamicin | Sigma | G-1397 | Final concentration: 5μg/ml. Component of SOF-HEPES medium. |
Water for embryo transfer | Sigma | W1503 | Component of SOF-HEPES medium. |
SOF-HEPES medium | Made in the lab | pH 7.3-7.4, 280±10 mOs. Filter sterilized through a 22μm filter can be stored in the fridge at 4° C for 1 month. Warm in 37 °C water bath before use. |