Journal
/
공학
/
连续湿法刻蚀法制作不同几何断面烷微流控通道的一步法
JoVE 신문
공학
JoVE 비디오를 활용하시려면 도서관을 통한 기관 구독이 필요합니다.  전체 비디오를 보시려면 로그인하거나 무료 트라이얼을 시작하세요.
JoVE 신문 공학
One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes
Please note that all translations are automatically generated. Click here for the English version.

连续湿法刻蚀法制作不同几何断面烷微流控通道的一步法

DOI:
10.3791/57868-v

•

08:31 min

•

September 13, 2018

•

, , ,
1Research Center for Applied Sciences,Academia Sinica, 2Department of Civil Engineering,Tamkang University, 3College of Engineering,Chang Gung University

Chapters

  • 00:04Title
  • 01:12Fabrication of Polydimethylsiloxane (PDMS) Channel Layouts
  • 03:20Experimental Characterization of PDMS Wet Etching
  • 04:36PDMS Sequential Wet Etching for Microfluidic Channels of a Cross-shaped Cross-section
  • 05:50Fabrication and Characterization of a Microfluidic Mixer with Different Channel Sections
  • 07:08Results: Fabrication of Microfluidic Channels with Different Geometric Sections
  • 07:49Conclusion

Summary

자동 번역

자동 번역

对烷微流控器件中嵌入的非矩形截面通道的制作, 有几种方法可供选择。其中大部分涉及多步骤制造和广泛的对准。本文介绍了用烷连续湿法刻蚀法制作不同几何剖面微流控通道的一步法。

Tags

Microfluidic ChannelsPolydimethylsiloxane (PDMS)One-step FabricationSequential Wet EtchingGeometric Cross SectionsChannel FabricationMicrofluidic Device ManufacturingComplex Microfluidic SystemsMaster MoldPDMS MoldingOxygen Plasma Treatment

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

制造超材料使用光纤拉丝法

模拟行星内部分化过程中的实验室

板料成形过程的知识基于云的有限元模拟

电化学腐蚀和电子碰撞电离夏普场发射点的表征

微流控成像流式细胞仪通过不对称检测时间延伸光学显微镜（ATOM）

一步冷常压等离子体体外处理神经干细胞分化

拉伸和疏水图案长聚二甲基硅氧烷硅丝丝

使用精确旋转对齐来制造范德瓦尔斯异构结构

通过将激光蚀刻和染料结合，美学增强硅气凝胶

通过顺序毛细管辅助组装对微生物和微粒进行图案化

Read Article