Journal
/
공학
/
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly
JoVE 신문
공학
JoVE 비디오를 활용하시려면 도서관을 통한 기관 구독이 필요합니다.  전체 비디오를 보시려면 로그인하거나 무료 트라이얼을 시작하세요.
JoVE 신문 공학
Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

Patterning of Microorganisms and Microparticles through Sequential Capillarity-assisted Assembly

DOI:
10.3791/63131-v

•

10:17 min

•

November 04, 2021

•

, , ,
1Institute of Environmental Engineering, Department of Civil, Environmental and Geomatic Engineering,ETH Zurich, 2Department of Materials,ETH Zurich

Chapters

  • 00:04Introduction
  • 01:03Fabrication of the Microfluidic Chip
  • 03:54Bacterial Patterning
  • 06:53Colloidal Patterning
  • 08:10Results: The Analysis of the Colloidal Patterning Process of the Microfluidic Channels
  • 09:29Conclusion

Summary

자동 번역

자동 번역

We present a technology that uses capillarity-assisted assembly in a microfluidic platform to pattern micro-sized objects suspended in a liquid, such as bacteria and colloids, into prescribed arrays on a polydimethylsiloxane substrate.

Tags

Keywords: MicroorganismsMicroparticlesCapillarity-assisted AssemblyPatterningMicrofluidic ChannelColloidal ParticlesBacteriaPDMSMaterial EngineeringDrug ScreeningSingle-cell Analysis

Article

Embed

플레이리스트에 추가

Usage Statistics

Related Videos

check_url/kr/63131?article_type=v

Patterning via Optical Saturable Transitions – Fabrication and Characterization
check_url/kr/63131?article_type=v

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages
check_url/kr/63131?article_type=v

Optical Trap Loading of Dielectric Microparticles In Air
check_url/kr/63131?article_type=v

A Method for Obtaining Serial Ultrathin Sections of Microorganisms in Transmission Electron Microscopy
check_url/kr/63131?article_type=v

One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes
check_url/kr/63131?article_type=v

Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments
check_url/kr/63131?article_type=v

Study of a Dot-patterning Process on Flexible Materials using Impact Print-Type Hot Embossing Technology
check_url/kr/63131?article_type=v

Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
check_url/kr/63131?article_type=v

Frugal Imaging Technique of Capillary Flow Through Three-Dimensional Polymeric Printing Powders
check_url/kr/63131?article_type=v

Modeling and Experimental Analysis of the Single-Shaft Coaxial Motor-Pump Assembly in Electrohydrostatic Actuators

Read Article