Summary

Tools for the Real-Time Assessment of a Pseudomonas aeruginosa Infection Model

Published: April 06, 2021
doi:

Summary

Synthetic cystic fibrosis sputum medium (SCFM2) can be utilized in combination with both confocal laser scanning microscopy and fluorescence-activated cell sorting to observe bacterial aggregates at high resolution. This paper details methods to assess aggregate populations during antimicrobial treatment as a platform for future studies.

Abstract

Pseudomonas aeruginosa (Pa) is one of the most common opportunistic pathogens associated with cystic fibrosis (CF). Once Pa colonization is established, a large proportion of the infecting bacteria form biofilms within airway sputum. Pa biofilms isolated from CF sputum have been shown to grow in small, dense aggregates of ~10-1,000 cells that are spatially organized and exhibit clinically relevant phenotypes such as antimicrobial tolerance. One of the biggest challenges to studying how Pa aggregates respond to the changing sputum environment is the lack of nutritionally relevant and robust systems that promote aggregate formation. Using a synthetic CF sputum medium (SCFM2), the life history of Pa aggregates can be observed using confocal laser scanning microscopy (CLSM) and image analysis at the resolution of a single cell. This in vitro system allows the observation of thousands of aggregates of varying size in real time, three dimensions, and at the micron scale. At the individual and population levels, having the ability to group aggregates by phenotype and position facilitates the observation of aggregates at different developmental stages and their response to changes in the microenvironment, such as antibiotic treatment, to be differentiated with precision.

Introduction

Pseudomonas aeruginosa (Pa) is an opportunistic pathogen that establishes chronic infections in immune-compromised individuals. For those with the genetic disease cystic fibrosis (CF), these infections can span the course of a lifetime. CF causes the buildup of a viscous, nutrient-rich sputum in the airways, which becomes colonized by a variety of microbial pathogens over time. Pa is one of the most prevalent CF pathogens, colonizing the airways in early childhood and establishing difficult-to-treat infections1. Pa remains a significant clinical problem and is considered a leading cause of mortality in those with CF, despite improved therapy regimens in recent years2,3. This persistence phenotype and increasing antibiotic tolerance have earned Pa a place in a group of pathogens identified by both the Centers for Disease Control (CDC) and the World Health Organization (WHO) as research priorities for the development of new therapeutic strategies-the ESKAPE pathogens4.

Like other ESKAPE pathogens, acquired antibiotic resistance is common in Pa, but there are also many intrinsic properties that contribute to Pa antimicrobial tolerance. Among these is the ability of Pa to form aggregates-highly dense clusters of ~10-1,000 cells, which can be observed in multiple infections, including CF patient sputum5,6. Similar to Pa studied in other biofilm systems, Pa aggregates display clinically relevant phenotypes such as increased resistance to antibiotics and activation of cell-cell communication (quorum sensing (QS)). For example, aggregates of Pa have been shown to use QS-regulated behaviors to combat other microbes as well as tolerate antimicrobial treatments such as the production of pyocyanin7. The ability to study such behaviors offers an exciting insight into bacterial ecosystems in an environment similar to the one in which they exist in the human body.

One of the biggest challenges to studying how Pa aggregates respond to the changing sputum environment is the lack of nutritionally relevant and robust systems that promote aggregate formation. Much of what is known about Pa has been discovered using in vitro systems in which cells grow planktonically or in a characteristic surface-attached, "mushroom" architecture that has not been observed in vivo8. While classical biofilm growth models, such as flow cells or solid agar, have yielded extensive and valuable knowledge about bacterial behaviors and mechanisms of antibiotic tolerance, these findings do not always translate in vivo. Many in vitro models have a limited ability to mimic the growth environment of the human infection site, necessitating costly in vivo studies. In turn, many in vivo models lack the flexibility and resolution afforded by in vitro techniques.

Synthetic cystic fibrosis sputum (SCFM2) is designed to provide an environment for Pa growth similar to that experienced during chronic infection in the CF lung. SCFM2 includes nutritional sources identified in expectorated CF sputa in addition to mucin, lipids, and DNA. Pa growth in SCFM2 requires a near identical gene set to that required for growth in actual sputum and supports natural Pa aggregate formation9,10. After inoculation, planktonic cells form aggregates that increase in size through expansion. Individual cells (referred to as migrants) are released from aggregates, migrate to uncolonized areas, and form new aggregates10. This life history can be observed using CLSM and image analysis at the resolution of a single cell. Aggregates of Pa formed in SCFM2 are of similar sizes to those observed in the CF lung10. This model allows the observation of multiple aggregates of varying size in real-time and in three dimensions at the micron scale. Time-lapse microscopy allows the tracking of thousands (~50,000) of aggregates in one experiment. The use of image analysis software allows the quantification of aggregate phenotypes from micrographs, including aggregate volume, surface area, and position in three dimensions to the nearest 0.1 μm, both at the individual aggregate and population levels. Having the ability to group aggregates by phenotype and position allows the differentiation of aggregates at different developmental stages with precision, as well as their response to a changing microenvironment6,11.

The application of SCFM2 to study Pa aggregates in low volume and high-throughput assays make it a flexible, cost-effective model. As a defined medium, SCFM2 offers uniformity and reproducibility across multiple platforms, providing a nutritionally and physically relevant method to study Pa aggregates in vitro9. Applications include its use in combination with CLSM to observe spatial organization and antibiotic tolerance at high resolution (as described in this methods paper). The ability to perform experiments that provide real-time, micron-scale data allows the study of intra-species and inter-species interactions as they may occur in vivo. For example, SCFM2 has previously been used to study the spatial dynamics of cell-cell communication in aggregate populations via a network of systems utilized by Pa to regulate multiple genes that contribute to virulence and pathogenesis6.

Figure 1
Figure 1: Graphical depiction of the main experimental steps. (A) SCFM2 is inoculated with Pa cells and allowed to form aggregates in a glass-bottomed culture dish. (B) Aggregates are transferred to the confocal microscope, and antibiotic is added. Depicted are three technical replicates (chambers 1-3) and a control well (4) of inoculated SCFM2 without antibiotic treatment. Aggregates are imaged using CLSM over the course of 18 h. (C) After the initial 18-h imaging, aggregates are treated with propidium iodide to visualize dead cells and imaged using CLSM (D) Aggregates with desired phenotype are separated from SCFM2 using FACS. Abbreviations: SCFM2 = synthetic cystic fibrosis sputum medium; Pa = Pseudomonas aeruginosa; CLSM = confocal laser scanning microscopy; FACS = fluorescence-activated cell sorting. Please click here to view a larger version of this figure.

Here, the utility of SCFM2 to study the impact of antibiotic treatment on Pa aggregates in real time is demonstrated, followed by the use of a cell-sorting approach to isolate populations of aggregates with distinct phenotypes for downstream analysis (Figure 1).

Protocol

1. Prepare synthetic cystic fibrosis medium (SCFM2)

NOTE: Preparation of SCFM2 comprises three main stages outlined below (Figure 2). For full details and references, see9,10,12.

Figure 2
Figure 2: Preparation and inoculation of SCFM2 medium. (A) Buffered base is prepared using salts and amino acids listed in Table 1 and Table 2. Buffered base can be stored at 4 °C for up to 30 days, but must be protected from light exposure. (B) Mucin and DNA are added to an aliquot of buffered base and dissolved into solution overnight at 4 °C. (C) Lipid and additional stocks are added to the overnight solution and incubated at 37 °C with agitation at 250 rpm for 20 min. SFCM2 is then inoculated with washed, log phase cells at an OD600 = 0.05. Abbreviations: SCFM2 = synthetic cystic fibrosis sputum medium. Please click here to view a larger version of this figure.

  1. Sterilization of porcine mucin
    1. Prepare sterile mucin at a final concentration of 5 mg/mL in SCFM2. For example, for a 5 mL volume of SCFM2, weigh 25 mg of Type II mucin in a sterile Petri dish, and place into an ultraviolet (UV) sterilizer for 4 h, gently agitating every hour.
    2. After 4 h, transfer the UV-treated mucin into autoclaved 1.7 mL tubes under sterile conditions, and store at -20 °C.
    3. To confirm complete sterilization, dissolve a sample of mucin in a sterile liquid, such as water or Luria Bertani (LB) broth, and observe under a microscope.
      NOTE: Sterilized mucin can be stored at -20 °C for up to 6 months.
  2. Preparation of buffered base
    1. Prepare salt and amino acid stock solutions by adding the appropriate amounts by weight to deionized water as listed in Table 1. Filter-sterilize all stock solutions using a 0.22 μm filter, wrap in foil to protect from light degradation, and store at 4 °C for up to one month.
    2. Prepare buffered base by combining 190 mL of deionized water with amino acid and salt stock solutions by volumes listed in Table 1. Adjust the solution to pH 6.8, and increase to a final volume of 250 mL. Filter-sterilize using a 0.22 μm filter, and store at 4 °C for up to 30 days.
    3. On the evening before the experiment, aliquot the desired amount of buffered base into a glass culture flask, and add mucin (5 mg/mL as described in step 1.1.1) and purified salmon sperm DNA (0.6 mg/mL). Agitate gently, wrap in foil, and leave at 4 °C overnight to allow mucin and DNA to dissolve into solution.
      NOTE: Salmon sperm DNA aliquots should be thawed on ice, vortexed, and added to buffered base and mucin. Tryptophan, asparagine, and tyrosine stock solutions must be prepared in solutions of NaOH (see Table 1 for concentrations) instead of deionized water. Keep buffered base and all stock solutions wrapped in foil to protect from light exposure. Most stocks will be stable for up to a month. Stocks that become discolored should not be used and should be replaced before use.
  3. Addition of supplemental stocks
    1. On the day of the experiment, add the stocks listed in Table 2 to the buffered base containing mucin and DNA.
      NOTE: Prepare a fresh FeSO4 solution on the day of the experiment, but all other stocks can be made ahead of time and stored for 30 days at 4 °C. 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) contains chloroform. Handle with caution, and do not use near open flames. After the addition of DOPC, incubate SCFM2 at 37 °C with shaking (250 rpm) for at least 20 min (for 5 mL culture). This incubation period allows the chloroform in the DOPC to evaporate. The flask should not be airtight; instead, cover the flask opening loosely with foil.

2. Real time assessment of antimicrobial tolerance in bacterial aggregates

  1. Prepare overnight cultures
    1. On the evening before the experiment, inoculate 5 mL of LB broth with several colonies of Pa PAO1-pMRP9-113 from an LB agar plate containing antibiotic (carbenicillin 300 μg/mL). Grow overnight at 37 °C with agitation at 250 rpm.
      NOTE: Grow overnight cultures with the addition of antibiotics required for the selection of required plasmids (here, the green fluorescent protein (GFP) expression plasmid, pMRP9-1). Note that Pa cells are to be washed before SCFM2 is inoculated. LB may be substituted for other rich laboratory media for overnight cultures. All bacterial isolates should be handled using appropriate BSL-2 guidelines throughout this protocol.
  2. Inoculate SCFM2
    1. On the day of the experiment, back-dilute overnight cultures of Pa 1:10 (culture: liquid media) by inoculating 500 μL into 5 mL of fresh LB broth. Grow cells until log phase (60-90 min) at 37 °C with agitation at 250 rpm.
    2. Centrifuge log phase cultures at 10,000 × g for 5 min. Wash the cells by removing the supernatant and resuspending in 3 mL of filter-sterilized phosphate-buffered saline (PBS, pH 7.0). Repeat twice, and resuspend the pellet in a final volume of 1 mL of PBS.
    3. Measure the absorbance of the washed cells using a spectrophotometer at 600 nm (OD600), and calculate the volume of culture required for a starting OD600 of 0.05 in 5 mL of SCFM2. Inoculate Pa into the SCFM2, and vortex gently to distribute cells throughout. Pipette 1 mL of the inoculated SCFM2 into each chamber of a 4-well, glass bottom, optical dish, and incubate for 4 h statically at 37 °C.
      NOTE: The doubling time of Pa cultures is dependent on the strain and the availability of oxygen. In SCFM2, under the conditions described here, the doubling time of Pa is ~1.4 h10.

3. Visualizing aggregates during antibiotic treatment with confocal laser scanning microscopy (CLSM)

NOTE: This section describes the use of confocal laser scanning microscope and image capture software for the imaging of Pa aggregates in SCFM2. The goal is to observe and characterize the remaining (tolerant) bacterial biomass after treatment with antibiotics. The steps outlined can be performed with success on other confocal microscopes, although the instrument operating manual should be referenced for specific guidance.

  1. Image Pa cultures using either a heated chamber or a heated microplate fitted on the microscope stage to maintain an ambient temperature of 37 °C. Start the Incubation module at least 2 h prior to the beginning of the experiment to allow all apparatus to reach the desired temperature, and reduce further expansion and movement during data collection.
  2. After 4 h, transfer SCFM2 cultures containing Pa cells to the heated microscope stage. Designate 3 out of 4 wells as technical replicates for antibiotic treatment, and consider the 4th well as a no-treatment control, containing only Pa cells in SCFM2, without antibiotic. Identify aggregates using brightfield microscopy within the Locate tab prior to any excitation of fluorescent reporters. Define an area for imaging within each well, and store its position (x-y-z coordinates) using the Positions module in the imaging software.
  3. Use a 63x oil-immersion objective to visualize Pa cultures containing the GFP expression plasmid pMRP9-1 in SCFM2 with an excitation wavelength of 488 nm and emission wavelength of 509 nm. Take images using the z-stack option within the Acquisition module at 1 μm intervals (total of 60 slices). Use the Line-averaging module to reduce background fluorescence in the GFP channel within the total volume of the 60 μm z-stack images (1,093.5 mm3). Take control images of uninoculated SCFM2 by using identical settings to determine the background fluorescence for image analysis.
    NOTE: Images are acquired by producing 512 pixels x 512 pixels (0.26 μm x 0.26 μm pixels) 8-bit z-stack images that are 60 μm from the base of the coverslip.
  4. Use the time series option within the imaging software to capture 60 slices at each position (well) at 15-min intervals over a period of 18 h. Use the definite focus strategy within the software to store a focal plane for each position, which is returned to at each time point throughout the experiment.
  5. After a total 4.5 h of incubation, image each position using the above settings to determine the aggregate biomass within each of the four wells before the addition of antibiotic.
  6. After 6 h of total incubation, add antibiotic at 2x-below minimum inhibitory concentration (MIC) to each replicate. Pipette directly and gently into the middle of the well, just below the air-liquid interphase. Maintain all cultures in the heated confocal chamber.
    NOTE: Here, colistin sulfate at a concentration of 140 μg/mL was used.
  7. Begin imaging post-antibiotic treatment by clicking on the Start Experiment option within the imaging program.
    ​NOTE: Antibiotic concentration used is dependent on the antibiotic, the Pa isolate, and whether the user would like to examine killing or tolerance effects. This experiment uses a single dose. Additional doses can be added without disrupting cultures if needed.

4. Propidium iodide staining of Pa aggregates

NOTE: Propidium iodide (PI) is commonly utilized as a staining reagent to identify non-viable (dead) bacterial cells in culture. Here, it is used to identify aggregates sensitive to antibiotic treatment applied in section 3. Throughout this protocol, the expression and detection of GFP in Pa cells is used as the main proxy for cell viability. This final step allows confocal imaging to be used once more to identify the spatial positioning of live/dead aggregates in relation to each other. Additionally, aggregates are identified as live/dead for further downstream cell sorting in section 5.

  1. After 18 h, add PI to each well of the four-chambered optical bottom dish containing SCFM2 cultures. Follow the manufacturer's instructions for the volume of PI and incubation time (e.g., ~2 μL per mL of culture, ~20-30 min).

5. Isolating live cells from aggregates using a FACS approach

NOTE: FACS presents a powerful platform to sort and isolate groups of cells according to a fluorescently tagged phenotype. Here, FACS is used to isolate live (antibiotic tolerant) aggregates from non-viable aggregates.

  1. After staining with propidium iodide, remove the cultures from incubation, and transfer to a FACS instrument in an insulated container to maintain 37 °C.
  2. Run 1 mL aliquots of SCFM2 containing Pa aggregates at the lowest flow rate.
    NOTE: Each aliquot will contain ~15,000 aggregates.
  3. To detect GFP, illuminate the cells with a 488 nm laser, and record the fluorescent signal height at 530/30 nm. Visualize the PI staining by excitation with a 561 nm laser, and record the fluorescent signal height at 610/20 nm. Perform sorting using a 70-u nozzle.
    ​NOTE: Sorted aggregates can be pooled in multiple ways depending on the user's application. In this case, FACS was used to sort viable Pa aggregates for downstream RNA sequencing. Alternative applications are discussed below.

6. Image analysis

NOTE: Time-lapse microscopy generates large amounts of data. An 18-h experiment for the observation of Pa aggregates in SCFM2 identifies ~50,000 aggregates over time, which have the potential to be characterized for volume and spatial positioning. Use an image analysis software to quantify aggregate dynamics in SCFM2:

  1. For aggregate studies in SCFM2, quantify the background GFP fluorescence by creating a histogram of counts in the GFP channel that is produced for uninoculated SCFM2 and SCFM2 inoculated with Pa strain PAO1 carrying pMRP9-1. To ensure that detected GFP voxels correlate to Pa biomass, define a GFP+ voxel as ≥1.5x the GFP background count value.
    NOTE: The background fluorescence is defined as the highest voxel value of three randomly chosen positions, averaged. Background counts are, as a standard measure, subtracted from all pixels in experimental images by the image analysis software.
  2. After background subtraction in the Surpass module, produce isosurfaces for all remaining voxels.
  3. To detect individual aggregates, enable the Split Objects option, and define aggregates as objects with volumes of ≥5 μm3. Use the Vantage module in the image analysis software to calculate the volume, x-y-z, and sum of GFP voxels for each individual object. Export this data to an external statistical platform.
    NOTE: Some image analysis software permit the export of multiple quantitative phentoypes at once, allowing for correlations to be calculated.
  4. Filter data exported from the Vantage module by size to ensure that no objects of <0.5 µm3 (dispersed biomass) remain. For each individual object within the image, calculate the distance from itself in relation to other objects (aggregates) using the Vantage module of the image analysis software or manually with the following equation.
    d = sqrt((x2− x1)2 + (y2− y1)2 + (z2− z1)2) (1)
  5. Use SUM and AVERAGE calculations to find the total biomass and average aggregate volume. Alternatively, export data into other statistical platforms or scripts, e.g., the distribution of aggregates across biomass as discussed in the representative results (script unpublished in collaboration with the Whiteley laboratory, Georgia Institute of Technology).

Representative Results

This work details methods to observe Pa aggregates at a high resolution and in an environment similar to that of chronic infection of the CF lung9,10,12. SCFM2 provides an in vitro system that promotes natural aggregation of Pa cells in sizes similar to those observed during actual infection10. The adaptability of SCFM2 as a defined medium can be leveraged to approach many research avenues. The goal of this work is to highlight a workflow that involves a combination of microscopy and FACS, with the intention of encouraging its use for future research, collaborations, and applications.

The use of CLSM allows temporal, high-resolution imaging that can be used to study the dynamics of developing bacterial populations. This work demonstrates several potential ways by which Pa aggregates can be characterized after treatment with antibiotic. Figure 3A provides a broad view of viable Pa aggregates after antibiotic treatment. Four hours after the application of antibiotic, multiple aggregates remain; color ranges can be applied to represent different characteristics of each individual aggregate. Examples of quantifiable characteristics include volume, area, voxel intensity (for use of fluorescent reporters), and position in either of the x-y-z axes.

Image analysis using dedicated software allows for the fully customizable observation of data, identifying each aggregate as an individual object, wherein quantitative data can be exported for further analysis. Figure 3B provides an example of how exported data can be used. Here, the total biomass of aggregate populations can be calculated over time. In these representative data, treatment with antibiotic significantly reduces biomass in comparison to untreated aggregates. Supplemental Video S1 is a powerful representation of how time-series microscopy can be used to physically observe aggregates within these biomass data after antibiotic treatment. Each aggregate has been color-coded to represent the calculated volume (μm3), allowing a visual record of aggregate populations, which can also be used for further spatial analysis using applications, both within the image analysis software and other resources (not discussed here10,15).

Experiments developed to identify mechanisms of antibiotic tolerance in Pa aggregates produce large amounts of data. Each replicate produces physical data of ~15,000 aggregates (~60,000 aggregates in total). A new approach to handling this data has involved the production of aggregate heat maps (Figure 3C). By calculating how aggregates of different sizes contribute to the overall population, patterns of how aggregates respond to antibiotic treatment in relation to their size, shape, and position in relation to each other can be identified.

Figure 3
Figure 3: Examples of aggregate data analysis. (A) Overview of remaining aggregate biomass after antibiotic treatment. Isosurfaces of corresponding GFP voxels have been rendered and color-coded according to volume (μm3). Scale bar = 30 μm. (B) Total biomass (μm3) of Pa aggregate populations over time in SCFM2. Blue line represents untreated aggregates, red line represents aggregates treated with the antibiotic, colistin (140 μg/mL). Presented data include 3 biological replicates (± SEM). (C) Aggregate volume heat maps representing the contribution of individual aggregates by volume (μm3, x-axis) to total biomass (μm3, second y-axis) over time (h, y-axis). Representative data include Pa aggregates in the presence and absence of antibiotic (as in Figure 3B), where 0 h represents time of antibiotic addition after 6 h aggregate growth. Data include three biological replicates (~50,000 total aggregates). Abbreviations: GFP = green fluorescent protein; SCFM2 = synthetic cystic fibrosis sputum medium; SEM = standard error of the mean; Pa = Pseudomonas aeruginosa. Please click here to view a larger version of this figure.

Spatial analysis at this stage involves using the expression of GFP by Pa as a proxy for viability in the presence of antibiotic. The addition of PI after 18 h allows the identification of the position of non-viable aggregates in relation to viable aggregates (Supplemental Figure S1). The overarching goal of this method is to identify spatial patterns between sensitive and tolerant aggregates after treatment with antibiotics. Future studies will include multiple time points in addition to the end-point assay described above.

The final stage of the workflow utilizes a FACS-based approach to sort aggregates in SCFM2. This work demonstrates FACS' ability to separate viable cells from the remaining population of aggregates (including non-viable). Figure 4 demonstrates the use of FACS to pool viable aggregates for further experiments such as high-throughput sequencing, e.g., RNA-sequencing (RNA-seq). After treatment with antibiotics (Figure 4A represents one time point (18 h), aliquots of SCFM2 containing Pa aggregates can be successfully separated according to their fluorescent features. Here, GFP has been identified for tolerant aggregates. Figure 4B provides an example of one such sorting event, where GFP-expressing cells are separated from the remaining culture (PI-treated aggregates). In addition, aggregates can be clearly identified from SCFM2, which produces its own fluorescent profile. The ability to sort cells in this way has many applications (Figure 5).

Figure 4
Figure 4: FACS of Pa aggregates in SCFM2. (A) Diagram of a FACS instrument used to separate viable and non-viable Pa aggregates from SCFM2. (B) Representative plot of aggregates separated in SCFM2 generated by FACS software. Three quadrants indicate live aggregates (GFP), remaining culture containing non-viable cells (RFP is used as an alternative to propidium iodide staining here, both excitable by the 488 nm laser), and SCFM2 control. Data represent 1 of 3 biological replicates containing ~15,000 events (aggregates). Abbreviations: FACS = fluorescence-activated cell sorting; SCFM2 = synthetic cystic fibrosis sputum medium; Pa = Pseudomonas aeruginosa; GFP = green fluorescent protein; RFP = red fluorescent protein; PE-Texas Red-H = peak height for phycoerythrin-Texas Red conjugate stained cells; FITC-H = peak height for fluorescein isothiocyanate-stained cells. 

Figure 5
Figure 5: Potential experimental applications utilizing SCFM2. (A) Exposure of Pa aggregates to repeated antibiotic doses. (B) Co-culture of Pa aggregates with other bacterial species. (C) Exposure of Pa aggregates to host immune cells, e.g., PMNs. A, B, and C can be combined with CLSM imaging methods and FACS approach for downstream RNA-seq, proteomics, or 3D spatial analysis. Abbreviations: SCFM2 = synthetic cystic fibrosis sputum medium; Pa = Pseudomonas aeruginosa; PMNs = polymorphonuclear leukocytes; CLSM = confocal laser scanning microscopy; FACS = fluorescence-activated cell sorting; RNA-seq = RNA sequencing; 3D = three-dimensional; LC-MS/MS = liquid chromatography/tandem mass spectrometry. Please click here to view a larger version of this figure.

Chemical Stock Concentration (M) Final concentration (mM) Notes
NaH2PO4 0.2 1.3
Na2HPO4 0.2 1.25
KNO3 1 0.35
K2SO4 0.25 0.27
NH4Cl 2.28 Add solid directly to buffered base
KCl 14.94 Add solid directly to buffered base
NaCl 51.85 Add solid directly to buffered base
MOPS 10 Add solid directly to buffered base
Ser 0.1 1.45
Glu HCl 0.1 1.55
Pro 0.1 1.66
Gly 0.1 1.2
Ala 0.1 1.78
Val 0.1 1.12
Met 0.1 0.63
Ile 0.1 1.12
Leu 0.1 1.61
Orn HCl 0.1 0.68
Lys HCl 0.1 2.13
Arg HCl 0.1 0.31
Trp 0.1 0.01 Prepared in 0.2 M NaOH
Asp 0.1 0.83 Prepared in 0.5 M NaOH
Tyr 0.1 0.8 Prepared in 1.0 M NaOH
Thr 0.1 1.07
Cys HCl 0.1 0.16
Phe 0.1 0.53
His HCl H2O 0.1 0.52
Salmon Sperm DNA 0.6 mg/mL
Porcine Mucin 5 mg/nL

Table 1: Preparation of salt, amino acid, DNA, and mucin stocks required for buffered base of synthetic cystic fibrosis sputum medium, SCFM2.

Chemical Stock concentration (M) Final concentration (mM) Notes
Dextrose (D-glucose) 1 3
L-lactic acid 1 9.3 Adjust to pH 7.0 with NaOH
CaCl2*2H2O 1 1.75
MgCl2*6H2O 1 0.61
FeSO4*7H2O 1 mg/mL 0.0036 Make fresh daily
N-acetylglucosamine 0.25 0.3
1,2-dioleoyl-sn-glycero-3-phosphocoline (DOPC) 25 mg/mL 100 µg/mL Incubate for at least 20 min at 37 °C after addition

Table 2: Preparation of additional stocks required for buffered base of synthetic cystic fibrosis sputum medium, SCFM2.

Supplemental Figure S1: Pa aggregates in SCFM2. A rendered confocal micrograph of viable (green) and non-viable (red) Pa aggregates formed in SCFM2. Scale bar = 5 μm. Abbreviations: SCFM2 = synthetic cystic fibrosis sputum medium; Pa = Pseudomonas aeruginosa. Please click here to download this File.

Supplemental Video S1: Aggregates in SCFM2 after treatment with antibiotic. Pa aggregate images captured every 30 min in SCFM2 using CLSM. Aggregates are labelled individually by colors representing aggregate volume (μm3, color scale not shown as representative image). Scale bar = 5 μm. Abbreviations: SCFM2 = synthetic cystic fibrosis sputum medium; Pa = Pseudomonas aeruginosa; CLSM = confocal laser scanning microscopy. Please click here to download this Video.

Discussion

This work has introduced methodologies that can be combined to study bacterial aggregate populations in the presence and absence of antibiotic treatment. High-resolution CLSM allows the visualization of changes in aggregate biomass and the structural orientation of aggregates over real time when exposed to antibiotics. In addition, physical and structural features of the biomass that remain after treatment with antibiotics can be quantified, with the goal to correlate these observations with future gene expression studies utilizing RNA-seq. While the use of GFP-expressing cells allows visualization of the collective and individual behavior of antibiotic-tolerant cells, it provides only part of the overall picture. Much can be learned from the spatial positioning of cells that did not survive antibiotic treatment, both individually and in relation to the surviving and tolerant biomass.

Time-lapse microscopy generates large amounts of data. An 18-h experiment for the observation of Pa aggregates in SCFM2 identifies ~50,000 aggregates over time, which have the potential to be characterized for volume and spatial positioning. The CLSM used here (see the Table of Materials) captures high-resolution images of developing aggregates for analysis. Spatial positioning of an individual aggregate (relative to surrounding aggregates) in three dimensions (± 0.1 μm) can be used to allow for precise measurements of the distance between aggregates. Physical phenotypes of bacterial aggregates can be determined using a combination of analysis approaches. Imaging software provides surface rendering and three-dimensional (3D) positioning. In-house-generated scripts can be used to sort aggregates by phenotype (e.g., volume) and calculate distribution of size-binned biomass. Additional resources are available to segment individual cells within aggregates (e.g., to support the use of transcriptional reporters14). Combined, these analysis tools provide a broad assessment of aggregate phenotypes, with the flexibility to modify analyses for emerging interests as data are generated.

After the initial 18-h imaging, aggregates were treated with PI, a technique often referred to as live/dead staining. PI enters cells with a porous (compromised) membrane, allowing the visualization of dead or severely stressed cells in contrast to live cells expressing GFP. The spatial organization of bacterial communities in the CF lung as aggregates can provide information about bacterial community behaviors. Identifying viable and non-viable cells, which are sequestered within an aggregate, facilitates the identification of the distribution of cells within the community that may be more sensitive to antibiotic treatment. Quantifying the physical changes that aggregates undergo in response to antibiotics as well as identifying genotypic features of antibiotic-tolerant aggregates could inform future therapies against Pa.

The use of PI also has downstream applications in the FACS approach of the workflow, although it should be noted that it is not always necessary, as viable cells in this experiment can be differentiated by GFP expression. However, PI staining allows spatial information to be gained from aggregates at the end of each assay. By highlighting the use of FACS to sort aggregates, this methods paper demonstrates 1) that SCFM2 can be used in a FACS machine without causing damage or clogs despite its viscosity, 2) FACS can be used to separate single cells from an aggregate and group them into distinct populations (phenotypes), and 3) PI staining has utility for separating dead cells from a population with FACS, particularly if the other cells of interest are not expressing a fluorescent marker. The use of live-cell staining techniques highlights the application of this protocol for the use of clinical isolates wherein genetic manipulation is often difficult. Although optimization is likely required strain-by-strain , aggregate phenotypes can be identified at the same resolution by using many commercially available fluorophores.

Compatibility of SCFM2 with FACS is a huge advantage and now allows investigators to isolate specific single cells from an aggregate into distinct populations. This itself has many applications for future studies containing mixed populations of cells. For example, studying aggregation with other species or heterogeneity within single species aggregates6. This exciting, high-resolution sorting process is widely available in many institutions and has many downstream applications. Viable cells from the aggregates in this study were sorted for future RNA-seq experiments. Other applications could include proteomics; resampling of aggregates for evolutionary studies, such as assessing the effects of repeated antibiotic exposure; co-culturing with other species; or co-culturing with human immune cells (Figure 5). Combining these methods with CLSM imaging experiments allows the correlation of observed bacterial traits and behaviors with quantitative data, with the potential to identify mechanisms of bacterial communities, intra-species relationships, or resistance to antimicrobials.

Alongside the many advantages of these methodologies, there are some pitfalls that should be addressed. This study uses PI as an end-point marker of cell viability; ideally in the future, this would be replaced with cell activity models to differentiate cells over multiple time points. However, these data establish the use of SCFM2 to culture aggregates that can be sorted in multiple ways other than live/dead. The primary advantage is that aggregates can be transferred directly to the FACS machine without washing, and potential disruption of any spatial structure developed over the course of an experiment. Overall, this is an exciting platform that could be used by many labs to foster collaborative projects with those interested in Pa, CF, and microbial behaviors.

Declarações

The authors have nothing to disclose.

Acknowledgements

S.E.D is supported by start-up funds provided by the Department of Molecular Medicine, The University of South Florida, as well as a CFF research grant (DARCH19G0) the N.I.H (5R21AI147654 – 02 (PI, Chen)) and the USF Institute on Microbiomes. We thank the Whiteley lab for ongoing collaboration involving data sets related to this manuscript. We thank Dr. Charles Szekeres for facilitating FACS sorting. Figures were created by A.D.G and S.E.D using Biorender.com.

Materials

Amino acids
Alanine AcrEquation 1s Organics 56-41-7
Arginine HCl MP 1119-34-2
Asparagine AcrEquation 1s Organics 56-84-8 Prepared in 0.5 M NaOH
Cystine HCl Alfa Aesar L06328
Glutamic acid HCl AcrEquation 1s Organics 138-15-8
Glycine AcrEquation 1s Organics 56-40-6
Histidine HCl H2O Alfa Aesar A17627
Isoleucine AcrEquation 1s Organics 73-32-5
Leucine Alfa Aesar A12311
Lysine HCl Alfa Aesar J62099
Methionine AcrEquation 1s Organics 63-68-3
Ornithine HCl Alfa Aesar A12111
Phenylalanine AcrEquation 1s Organics 63-91-2
Proline Alfa Aesar A10199
Serine Alfa Aesar A11179
Threonine AcrEquation 1s Organics 72-19-5
Tryptophan AcrEquation 1s Organics 73-22-3 Prepared in 0.2 M NaOH
Tyrosine Alfa Aesar A11141 Prepared in 1.0 M NaOH
Valine AcrEquation 1s Organics 72-18-4
Antibiotic
Carbenicillin Alfa Aesar J6194903
Day-of Stocks
CaCl2 * 2H2O Fisher Chemical C79-500
Dextrose (D-glucose) Fisher Chemical 50-99-7
1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) Fisher (Avanti Polar Lipids) 4235-95-4 shake 15-20 min at 37 °C to evaporate chloroform
FeSO4 * 7H2O AcrEquation 1s Organics 7782-63-0 this stock equals 1 mg/mL, MUST make fresh
L-lactic acid Alfa Aesar L13242 pH stock to 7 with NaOH
MgCl2 * 6H2O AcrEquation 1s Organics 7791-18-6
N-acetylglucosamine  TCI A0092
Prepared solids
Porcine mucin Sigma M1778-100G UV-sterilize
Salmon sperm DNA Invitrogen 15632-011
Stain
Propidium iodide Alfa Aesar J66764MC
Salts
K2SO4 Alfa Aesar A13975
KCl Alfa Aesar J64189 add solid directly to buffered base
KNO3 AcrEquation 1s Organics 7757-79-1
MOPS Alfa Aesar A12914 add solid directly to buffered base
NaCl Fisher Chemical S271-500 add solid directly to buffered base
Na2HPO4 RPI S23100-500.0
NaH2PO4 RPI S23120-500.0
NH4Cl AcrEquation 1s Organics 12125-02-9 add solid directly to buffered base
Consumables
Conical tubes (15 mL) Olympus plastics 28-101
Conical tubes (50 mL) Olympus plastics 28-106
Culture tubes w/air flow cap Olympus plastics 21-129
35 mm four chamber glass-bottom dish CellVis NC0600518
Luria Bertani (LB) broth Genessee Scientific 11-118
Phosphate-buffered saline (PBS) Fisher Bioreagents BP2944100
Pipet tips (p200) Olympus plastics 23-150RL
Pipet tips (p1000) Olympus plastics 23-165RL
Serological pipets (5 mL) Olympus plastics 12-102
Serological pipets (25 mL) Olympus plastics 12-106
Serological pipets (50 mL) Olympus plastics 12-107
Ultrapure water (RNAse/DNAse free); nanopure water Genessee Scientific 18-194 Nanopure water used for preparation of solutions in Table 1
Syringes (10  mL) BD 794412
Syringes (50 mL) BD 309653
0.22 mm PES syringe filter Olympus plastics 25-244
PS cuvette semi-mico Olympus plastics 91-408
Software
Biorender To prepare the figures
FacsDiva6.1.3 Becton Dickinson, San Jose, CA
Imaris Bitplane version 9.6
Zen Black
Equipment
FacsAriallu Becton Dickinson, San Jose, CA
LSM 880 confocal laser scanning microscope Zeiss

Referências

  1. Ramsay, K. A., et al. The changing prevalence of pulmonary infection in with fibrosis: A longitudinal analysis. Journal of Cystic Fibrosis. 16 (1), 70-77 (2017).
  2. Bessonova, L., et al. Data from the US and UK cystic fibrosis registries support disease modification by CFTR modulation with ivacaftor. Thorax. 73 (8), 731-740 (2018).
  3. Breuer, O., et al. Changing prevalence of lower airway infections in young children with cystic fibrosis. American Journal of Respiratory and Critical Care Medicine. 200 (5), 590-599 (2019).
  4. O’Donnell, J. N., Bidell, M. R., Lodise, T. P. Approach to the treatment of patients with serious multidrug-resistant Pseudomonas aeruginosa infections. Pharmacotherapy. 40 (9), 952-969 (2020).
  5. Bjarnsholt, T., et al. The in vivo biofilm. Trends in Microbiology. 21 (9), 466-474 (2013).
  6. Darch, S. E., et al. Spatial determinants of quorum signaling in a Pseudomonas aeruginosa infection model. Proceedings of the National Academy of Sciences of the United States of America. 115 (18), 4779-4784 (2018).
  7. Zhu, K., Chen, S., Sysoeva, T. A., You, L. Universal antibiotic tolerance arising from antibiotic-triggered accumulation of pyocyanin in Pseudomonas aeruginosa. PLoS Biology. 17 (12), 3000573 (2019).
  8. Ciofu, O., Tolker-Nielsen, T. Tolerance and resistance of Pseudomonas aeruginosa biofilms to antimicrobial agents-how P. aeruginosa can escape antibiotics. Frontiers in Microbiology. 10, 913 (2019).
  9. Turner, K. H., Wessel, A. K., Palmer, G. C., Murray, J. L., Whiteley, M. Essential genome of Pseudomonas aeruginosa in cystic fibrosis sputum. Proceedings of the National Academy of Sciences of the United States of America. 112 (13), 4110-4115 (2015).
  10. Darch, S. E., et al. Phage inhibit pathogen dissemination by targeting bacterial migrants in a chronic infection model. MBio. 8 (2), 00240 (2017).
  11. Jorth, P., et al. Regional isolation drives bacterial diversification within cystic fibrosis lungs. Cell Host & Microbe. 18 (3), 307-319 (2015).
  12. Palmer, K. L., Aye, L. M., Whiteley, M. Nutritional cues control Pseudomonas aeruginosa multicellular behavior in cystic fibrosis sputum. Journal of Bacteriology. 189 (22), 8079-8087 (2007).
  13. Davies, D. G., et al. The involvement of cell-to-cell signals in the development of a bacterial biofilm. Science. 280 (5361), 295-298 (1998).
  14. Hartmann, R., et al. Quantitative image analysis of microbial communities with BiofilmQ. Nature Microbiology. 6 (2), 151-156 (2021).
  15. Stacy, A., et al. Bacterial fight-and-flight responses enhance virulence in a polymicrobial infection. Proceedings of the National Academy of Sciences of the United States of America. 111 (21), 7819-7824 (2014).

Play Video

Citar este artigo
Gannon, A. D., Darch, S. E. Tools for the Real-Time Assessment of a Pseudomonas aeruginosa Infection Model. J. Vis. Exp. (170), e62420, doi:10.3791/62420 (2021).

View Video