Summary

에 대한 기계적 적응 고분자 나노 복합 재료의 환경 제어 Microtensile 테스트<em> 생체</em> 특성

Published: August 20, 2013
doi:

Summary

방법을 논의하는<em> 생체 내</em자극 – 반응 자료> 기계 동작은 시간의 함수로 모니터링됩니다. 샘플 테스트<em> 생체</em> 생리적 환경을 시뮬레이션하기 위해 환경 관리와 microtensile 테스터를 사용하여. 이 작품은 더 이해 촉진<em> 생체 내</em우리의 물자의> 행동.

Abstract

이식 할 수있는 초소형 디바이스는 여러 생물 의학 응용 1-4에 상당한 관심을 얻고있다. 이러한 장치는 재료 자체의 장점과 단점 5,6을 제공하는 각각의 범위에서 변경되었습니다. 가장 눈에 띄게, 마이크로 디바이스 크기 때문에, 높은 계수는 살아있는 조직으로 주입을 용이하게하기 위해 필요합니다. 반대로, 장치의 강성에 의한 지역의 긴장 7-9을 최소화하기 위해 주변 조직과 일치해야합니다. 따라서, 우리는 최근 기계적 물성 10-14의 변화와 환경 자극에 응답하여 이러한 요구 사항을 충족하는 바이오 영감 재료의 새로운 종류를 개발했다. 물과 높은 온도 (예를 들면 체온)에 노출되었을 때, 특히 우리의 폴리 (비닐 아세테이트) 기반의 나노 복합체 (PVAC-NC)는 강성의 감소를 표시합니다. 불행히도, 몇 가지 방법은 생체 내 15에있는 재료의 강성 및 기계화를 정량화하기 위해 존재생리적 환경 외부 anical 테스트는 종종 이식에 대한 큰 샘플 부적절한 필요합니다. 또한, 자극 – 반응 자료는 신속하게 explantation 후 초기 강성을 복구 할 수 있습니다. 따라서, 우리는 이식 microsamples의 기계적 특성이 생체 측정 할 수있는 방법을 개발했습니다, 시뮬레이션 생리적 조건 습기와 온도 제어 13,16,17를 사용하여 유지.

이를 위해, 사용자 정의 microtensile 테스터는 영의 계수를 (10 MPa의 5 GPa의 범위) 널리 변화와 마이크로 샘플에게 13,17을 수용 할 수 있도록 설계되었습니다. 우리의 관심은 생물학적 적응 신경 프로브 기판 마이크로에서 시료의 기계적 특성 필요하다고 할 수있는 도구로 PVAC-NC의 응용 프로그램입니다.로 이 도구는 건조 및 17 냉각 샘플을 최소화 습도와 온도 제어를 제공하기 위해 적응했다. 그 결과, 기계공explanted 시료의 알 특성은 밀접하게 explantation 직전에 샘플들을 반영한다.

이 방법의 전반적인 목표는 정량적 자극 – 반응, 기계적 적응 고분자 기반 소재의 생체 기계적 성질, 특히의 탄성 계수에 평가하는 것입니다. 이 첫 번째 이식의 결과가 독립적으로 강성의 감소에 기여하지 않고 explantation 후에 견본 기계적 특성의 변화를 최소화 할 수있는 환경 조건을 설정하여 수행됩니다. 샘플은 다음 주입, 처리 및 테스트 (그림 1A)를위한 준비가되어 있습니다. 각 샘플은 지정된 기간 동안 explanted 쥐의 두뇌 (그림 1B)로 여기에 표시됩니다 쥐의 대뇌 피질에 이식된다. 이 시점에서, 샘플 (그림 explanted 즉시로드 microtensile 테스터로하고 인장 시험을 받는다1C). 이후 데이터 분석은 대뇌 피질의 환경에서 이러한 혁신적인 재료의 기계적 거동에 대한 통찰력을 제공합니다.

Protocol

1. 샘플 준비 솔루션 주조 및 압축 기술 10-12을 사용하여 25-100 ㎛의 범위에서 두께 PVAC-NC 필름을 준비합니다. 영화와 웨이퍼 사이의 친밀한 접촉을 촉진하기 위해 70 ° C (유리 전이 온도 이상) 두 분 핫 플레이트에 가열하여 실리콘 웨이퍼에 필름을 준수합니다. 이 단계는 준비된 필름 평면 마이크로 프로세스에 필요한 실리콘 웨이퍼를 평평하고 고정 유지되도록합니다. …

Representative Results

우리 PVAC-NC를 포함한 거의 모든 고분자 재료의 기계적 특성은 환경 조건에 노출에 따라 달라집니다. 특히, 이러한 열이나 습기에 노출이 (가) 있습니다. 재료 인해 수분의 흡수에 가소, 또는 온도 변화를 겪게되면 탄성 계수의 감소를 표시합니다. 습기 및 생체 시료 기계적 특성에 대한 온도 제어 환경을 준비, 그것은 기계적 테스트 중에 microtensile 테스터뿐만 아니라에 샘플을로드하는 동안 …

Discussion

생물학적 시스템과 상호 작용하기위한 이식 생체 미세 전자 기계 시스템 (bioMEMS)의 발전은 고도로 맞춤 특성을 가진 새로운 재료의 개발 동기를 부여하고 있습니다. 이러한 물질 중 일부는 생리적 환경에서 발견 된 자극에 대한 응답으로 재료 특성의 변화를 전시하기 위해 설계되었습니다. 물자의 한개 최근에 개발 된 클래스는 수소 결합을 형성하는 액체 (예 : 물)과 크기 10,11,18 세…

Declarações

The authors have nothing to disclose.

Acknowledgements

이 작품은 모두 실험실 창업 펀드 (J. Capadona), 그리고 메드 트로닉 대학원 원정대 (K. 포터)를 통해 케이스 웨스턴 리저브 대학의 생명 공학과에 의해 지원되었다. 본 연구에 대한 추가 자금 지원에 의해 부분적으로 지원되었다 NSF 부여 ECS-0621984 (C. Zorman), 케이스 동창회 (C. Zorman), 공로 검토 수상 (B7122R)를 통해 보훈뿐만 아니라, 고급 플랫폼 기술 센터 (C3819C).

Materials

Name of Reagent/Material Company Catalogue Number Comments
Silicon wafer University Wafer   Mechanical grade
Extruded acrylic sheet Professional Plastics SACR 062EF Thickness 0.062″
Razor blade McMaster-Carr 3962A3  
Tweezers McMaster-Carr 8384A47 #5 tip
Super Glue Gel Loctite 130380  
Air Brush Snap-on Industrial BF175TA  
Air Compressor Paasche B002YKN8YO D500
Thermocouple Omega HH12A  
Hot plate Cimarec SP131325Q  
CO2 direct-write laser VersaLaser 3.5  
Dessicator Fisher Scientific 08-595  
Lamp     custom-built
Microtensile tester     custom-built

Referências

  1. Chen, P. J., Saati, S., Varma, R., Humayun, M. S., Tai, Y. C. Wireless intraocular pressure sensing using microfabricated minimally invasive flexible-coiled LC sensor implant. Journal of Microelectromechanical Systems. 19, 721-734 (2010).
  2. Ren, X., Zheng, N., Gao, Y., Chen, T., Lu, W. Biodegradable three-dimension micro-device delivering 5-fluorouracil in tumor bearing mice. Drug Delivery. 19, 36-44 (2012).
  3. Bai, Q. Single-unit neural recording with active microelectrode arrays. IEEE Transactions on Biomedical Engineering. 48, 911 (2001).
  4. Rousche, P. J., Pellinen, D. S., Pivin, D. P., Williams, J. C., Vetter, R. J., kirke, D. R. Flexible polyimide-based intracortical electrode arrays with bioactive capability. IEEE Transactions on Biomedical Engineering. 48, 361-371 (2001).
  5. Hassler, C., Boretius, T., Stieglitz, T. Polymers for neural implants. Journal of Polymer Science Part B: Polymer Physics. 49, 18-33 (2011).
  6. Mercanzini, A., Colin, P., Bensadoun, J. C., Bertsch, A., Renaud, P. In Vivo Electrical Impedance Spectroscopy of Tissue Reaction to Microelectrode Arrays. IEEE Transactions on Biomedical Engineering. 56, 1909-1918 (2009).
  7. Polikov, V. S., Tresco, P. A., Reichert, W. M. Response of brain tissue to chronically implanted neural electrodes. Journal of Neuroscience Methods. 148, 1-18 (2005).
  8. Subbaroyan, J., Kipke, D. Engineering in Medicine and Biology Society, 2006. , 3588-3591 (2006).
  9. Harris, J., Capadona, J., Miller, R., Healy, B., Shanmuganathan, K., Rowan, S., Weder, C., Tyler, D. Mechanically adaptive intracortical implants improve the proximity of neuronal cell bodies. Journal of Neural Engineering. 8, 066011 (2011).
  10. Capadona, J. R., Shanmuganathan, K., Tyler, D. J., Rowan, S. J., Weder, C. Stimuli-Responsive Polymer Nanocomposites Inspired by the Sea Cucumber Dermis. Science. 319, 1370-1374 (2008).
  11. Shanmuganathan, K., Capadona, J. R., Rowan, S. J., Weder, C. Stimuli-Responsive Mechanically Adaptive Polymer Nanocomposites. ACS Applied Materials & Interfaces. 2, 165-174 (2009).
  12. Shanmuganathan, K., Capadona, J. R., Rowan, S. J., Weder, C. Bio-inspired mechanically-adaptive nanocomposites derived from cotton cellulose whiskers. Journal of Materials Chemistry. 20, 180 (2010).
  13. Hess, A., Capadona, J., Shanmuganathan, K., Hsu, L., Rowan, S., Weder, C., Tyler, D., Zorman, C. Development of a stimuli-responsive polymer nanocomposite toward biologically optimized, MEMS-based neural probes. Journal of Micromechanics and Microengineering. 21, 054009 (2011).
  14. Capadona, J. R., Tyler, D. J., Zorman, C. A., Rowan, S. J., Weder, C. Mechanically adaptive nanocomposites for neural interfacing. Materials Research Society Bulletin. 37, 581-589 (2012).
  15. Ophir, J., Cespedes, I., Garra, B., Ponnekanti, H., Huang, Y. Elastography: ultrasonic imaging of tissue strain and elastic modulus in vivo. European journal of ultrasound. 3, 49-70 (1996).
  16. Hess, A., Shanmuganathan, K., Capadona, J., Hsu, L., Rowan, S., Weder, C., Tyler, D., Zorman, C. Micro Electro Mechanical Systems (MEMS). , 453-456 (2011).
  17. Harris, J. P., Hess, A. E., Rowan, S. J., Weder, C., Zorman, C. A., Tyler, D. J., Capadona, J. R. In vivo deployment of mechanically adaptive nanocomposites for intracortical microelectrodes. Journal of Neural Engineering. 8, 046010 (2011).
  18. Shanmuganathan, K. . Bio-inspired Stimuli-responsive Mechanically Dynamic Nanocomposites. , (2010).
  19. Rousche, P. J., Pellinen, D. S., Pivin, D. P., Williams, J. C., Vetter, R. J., Kipke, D. R. Flexible polyimide-based intracortical electrode arrays with bioactive capability. IEEE Transactions on Biomedical Engineering. 48, 361-371 (2001).
  20. Norlin, P., Kindlundh, M., Mouroux, A., Yoshida, K., Hofmann, U. G. A 32-site neural recording probe fabricated by DRIE of SOI substrates. Journal of Micromechanics and Microengineering. 12, 414 (2002).
  21. Ward, M. P., Rajdev, P., Ellison, C., Irazoqui, P. P. Toward a comparison of microelectrodes for acute and chronic recordings. Brain Research. 1282, 183-200 (2009).
  22. Lin, J. M., Chang, P. K. A Novel Remote Health Monitor with Replaceable Non-Fragile Bio-Probes on RFID Tag. Applied Mechanics and Materials. 145, 415-419 (2012).
  23. Kunzelman, K. S., Cochran, R. Stress/strain characteristics of porcine mitral valve tissue: parallel versus perpendicular collagen orientation. Journal of Cardiac Surgery. 7, 71-78 (1992).
  24. Snedeker, J., Niederer, P., Schmidlin, F., Farshad, M., Demetropoulos, C., Lee, J., Yang, K. Strain-rate dependent material properties of the porcine and human kidney capsule. Journal of Biomechanics. 38, 1011-1021 (2005).
  25. Ahn, S., Kasi, R. M., Kim, S. C., Sharma, N., Zhou, Y. Stimuli-responsive polymer gels. Soft Matter. 4, 1151-1157 (2008).
  26. Stuart, M. A. C., et al. Emerging applications of stimuli-responsive polymer materials. Nature Materials. 9, 101-113 (2010).
check_url/pt/50078?article_type=t

Play Video

Citar este artigo
Hess, A. E., Potter, K. A., Tyler, D. J., Zorman, C. A., Capadona, J. R. Environmentally-controlled Microtensile Testing of Mechanically-adaptive Polymer Nanocomposites for ex vivo Characterization. J. Vis. Exp. (78), e50078, doi:10.3791/50078 (2013).

View Video