Summary

Tek iplikli DNA Fayans Complex iki boyutlu şekiller Self-montaj

Published: May 08, 2015
doi:

Summary

DNA tiling is an effective approach to make programmable nanostructures. We describe the protocols to construct complex two-dimensional shapes by the self-assembly of single-stranded DNA tiles.

Abstract

Current methods in DNA nano-architecture have successfully engineered a variety of 2D and 3D structures using principles of self-assembly. In this article, we describe detailed protocols on how to fabricate sophisticated 2D shapes through the self-assembly of uniquely addressable single-stranded DNA tiles which act as molecular pixels on a molecular canvas. Each single-stranded tile (SST) is a 42-nucleotide DNA strand composed of four concatenated modular domains which bind to four neighbors during self-assembly. The molecular canvas is a rectangle structure self-assembled from SSTs. A prescribed complex 2D shape is formed by selecting the constituent molecular pixels (SSTs) from a 310-pixel molecular canvas and then subjecting the corresponding strands to one-pot annealing. Due to the modular nature of the SST approach we demonstrate the scalability, versatility and robustness of this method. Compared with alternative methods, the SST method enables a wider selection of information polymers and sequences through the use of de novo designed and synthesized short DNA strands.

Introduction

5,8,10 – – Önceki nükleik asit öz-montaj çalışmaları 1-25 DNA 2 olmak üzere kompleks yapıların, çeşitli başarılı inşaat yol açmıştır 13,17,23 veya RNA 7,22 periyodik 3,4,7, 22 ve algoritmik 5 iki boyutlu kafesler, kurdeleler 10,12 ve tüpler 4,12,13 3D kristaller 17 polyhedra 11 ve sonlu, 2D 7,8 şekillendirir. 16,18 – – 21,25 tek bir iskele şerit karmaşık bir şekle 9,14 oluşturulması için bir çok kısa yardımcı ştapel lifleri ile katlanır ve böylece özellikle etkili bir yöntem olup, bir DNA origami Desteksiz edilir.

Son zamanlarda, tek kollu bir kiremit (SST) kullanılarak önceden belirlenmiş 2B şekilleri ile ayrı ayrı nano yapımı için bir yöntem bildirilmiştir ve DNA origami 26 ile karşılaştırılabilir karmaşıklığı ile yapılar göstermişlerdir. Bu üre bizim daha önceki çalışma 26 bir uyarlama ve hassas reçete boyutları (genişlik ve uzunluklarda) ve morfolojileri ile sofistike sonlu 2B şekiller halinde ayrı ayrı adreslenebilir SSTs düzenlenmesi için protokoller detaylı anlatılmaktadır. SST yöntemin bir önemli avantaj modülerlik olduğunu. Bir yapının her bileşeni SST montaj modüler inşaat birim olarak hizmet vermektedir ve bu SSTs farklı alt grupları farklı şekiller üretirler. Böylece, kısa, sentetik DNA ipliklerini gelen öngörülen boyutları ve şekilleri ile nano inşa etmek genel bir platform kurdu.

SSTs dört alan, her biri 10 ya da 11 nükleotid uzunluğunda (Şekil 1A) içerir. SSTs kendi paralel heliks çapraz bağlantıları tarafından bir arada tutulan bir DNA kafes oluşturacak şekilde, bağlanır. Her geçiş etki 2 ve 3 fosfat Görsel netlik için diyagramlar yapay gerilir arasındaki fosfat olduğunu. geçitler (<arayla iki helezoni sarımlardan (21 baz) aralıklıstrong> Şekil 1B). Kompozit dikdörtgenler helisler ve helisel dönüş sayısını kendi boyutlarına göre adlandırılır. Örneğin, bir dikdörtgen altı helisleri genişliğinde ve sekiz sarmal 8T dikdörtgen × bir 6H olarak başvurulan uzun döner. SSTs, sol dışarı ekledi, veya başka keyfi şekil ve büyüklükte (Şekil 1C) yapılarını oluşturmak için yeniden düzenlenebilir. Örneğin, bir dikdörtgen tasarım arzu edilen bir uzunluğu ve yarıçapına (Şekil 1D) sahip bir tüp içine haddelenebilir.

Alternatif olarak, dikdörtgen SST kafes SST piksel oluşan bir molekül tuval, 7 nm her 3 nm olarak görülebilir. Bu çalışmada, 310 tam uzunlukta, iç SSTs bir molekül tuval kullanarak, Sol ve sağ sınırları oluşturan 24 tam uzunlukta SSTs, ve üst ve alt sınırları oluşturan 28 yarım uzunlukta SSTs. Tuval geçitler ile bağlantılı 24 çift helis vardır ve her bir sarmal 28 helezoni sarımlardan (294 baz) içerir ve bu nedenle olarak adlandırılır28T dikdörtgen tuval × 24H. 28T tuval x 24H, bir M13 faj iskele oluşturulan bir DNA origami yapısının benzer bir molekül ağırlığına sahiptir.

Protocol

1. DNA sekansı tasarımı 28T tuval × bir 24H oluşturmak için çift helisler, her çift sarmal için üst ve alt sarmal uzunluklarının sayısını, ve crossover modelini belirterek SST-sonlu bir yapı tasarımı için UNIQUIMER yazılımını 27. kullanın. Bu parametreleri tanımladıktan sonra, genel mimari (iplikçik kompozisyon ve tamamlayıcılık düzenlemesi) Programın grafiksel gösterilmiştir. Tamamlayıcılık düzenlemesi ve ek gereklilikleri (eğer varsa) karşılamak …

Representative Results

SSTs (Şekil 1) kendi kendine düzeneği, Şekil 2'de gösterildiği gibi farklı SSTs için DNA sekansları, streptavidin ile etiketleme sağlamak için optimum / değiştirilebilir., 28T dikdörtgen × 24H verim (Şekil 3 ve 4) arasında, transformasyon olacaktır Bir tüp içine dikdörtgen (Şekil 5), tüpler ve farklı boyutlarda dikdörtgenler (Şekil 10) oluşturmak için SSTs programlanabilir kendinden monta…

Discussion

Yapı oluşumu aşamasında, kendi kendine bir araya DNA nano-DNA şerit karışımı içinde (örn., 15 mM), magnezyum katyonları, uygun bir konsantrasyonunu korumak için önemlidir. Benzer şekilde, agaroz jel karakterizasyonu / saflaştırma aşamasında, uygun bir katyon, magnezyum konsantrasyonunu korumak için önemlidir (örneğin., 10 mM) ile jel elektroforez sırasında DNA nano korumak için jel çalıştıran tamponda. 28T dikdörtgen yapıda x 24H sağlamak için, farklı bir Mg ++</…

Declarações

The authors have nothing to disclose.

Acknowledgements

Bu eser Naval Research Genç Araştırmacı Programı Ödülü N000141110914, Naval Research Grant N000141010827 Dairesi, NSF KARİYER Ödülü CCF1054898, NIH Müdürü Yenilikçisi Ödülü 1DP2OD007292 Ofisi ve (PY için) Biyolojik ilham Mühendislik Fakültesi Başlangıç ​​Fonu için bir Wyss Enstitüsü tarafından finanse edildi ve Tsinghua-Pekin (BW) Yaşam Bilimleri Başlangıç ​​Fonu Merkezi.

Materials

Name of Material/ Equipment Company Catalog Number Comments/Description
DNA Strands  Integrated DNA Technology Section 3.1
SYBR Safe DNA gel stain Invitrogen S33102 Section 3.4.2
Freeze'N Squeeze DNA Gel Extraction Spin Columns BIO-RAD 731-6166 Section 3.6
Bruker's Sharp Nitride Lever Probes Bruker AFM Probes SNL10 Section 4.3
Safe Imager 2.0 Blue Light Transilluminator Invitrogen G6600 Section 3.6
Centrifuge 5430R Eppendorf 5428 000.414 Section 3.6
Transmission Electron Microscope  Jeol Jem 1400 Section 7.4
Multimode 8 Veeco Section 4
Typhoon FLA 9000 Laser Scanner GE Heathcare Life Sciences 28-9558-08 Section 3.5
Ultrapure Distilled water Invitrogen 10977-023 Section 3.7.1
Mica disk SPI Supplies 12001-26-2 Section 4.1
Steel mounting disk Ted Pella, Inc. 16218 Section 4.1
carbon coated copper grid for TEM Electron Microscopy Sciences FCF400-Cu Section 7.2
tweezers Dumont 0203-N5AC-PO Section 7.31
glow discharge system Quorum Technologies K100X Section 7.2
DNA Engine Tetrad 2 Peltier Thermal Cycler BIO-RAD PTC–0240G Section 3.3
Owl Easycast B2 Mini Gel Electrophoresis Systems ThermoScientific B2 Section 3.4.3
Seekam LE Agarose 500G Lonza 50004 Section 3.4.1
GeneRuler 1kb Plus DNA Ladder, Ready-To-Use 75-20000bp ThermoScientific SM1333 Section 3.4.4
Nanodrop 2000c UV-vis Spectrophotometer ThermoScientific Section 3.7
0.2 um filter Corning Inc. 431219 Section 7.1.2

Referências

  1. Seeman, N. C. Nucleic acid junctions and lattices. J. Theor. Biol. 99 (2), 237-247 (1982).
  2. Fu, T. J., Seeman, N. C. DNA double-crossover molecules. Bioquímica. 32 (13), 3211-3220 (1993).
  3. Winfree, E., Liu, F., Wenzler, L. A., Seeman, N. C. Design and self-assembly of two-dimensional DNA crystals. Nature. 394 (6693), 539-544 (1998).
  4. Yan, H., Park, S. H., Finkelstein, G., Reif, J. H., LaBean, T. H. DNA-templated self-assembly of protein arrays and highly conductive nanowires. Science. 301 (5641), 1882-1884 (2003).
  5. Rothemund, P. W. K., Papadakis, N., Winfree, E. Algorithmic self-assembly of DNA Sierpinski triangles. PLoS Biol. 2 (12), e424 (2004).
  6. Shih, W., Quispe, J., Joyce, G. A 1.7-kilobase single-stranded DNA that folds into a nanoscale octahedron. Nature. 427 (6975), 618-621 (2004).
  7. Chworos, A., et al. Building programmable jigsaw puzzles with RNA. Science. 306 (5704), 2068-2072 (2004).
  8. Park, S. H., et al. Finite-size, fully-addressable DNA tile lattices formed by hierarchical assembly procedures. Angew. Chem. Int. Ed. 45 (5), 735-739 (2006).
  9. Rothemund, P. W. K. Folding DNA to create nanoscale shapes and patterns. Nature. 440 (7082), 297-302 (2006).
  10. Schulman, R., Winfree, E. Synthesis of crystals with a programmable kinetic barrier to nucleation. Proc. Natl Acad. Sci. USA. 104 (39), 15236-15241 (2007).
  11. He, Y., et al. Hierarchical self-assembly of DNA into symmetric supramolecular polyhedra. Nature. 452 (7184), 198-201 (2008).
  12. Yin, P., et al. Programming DNA tube circumferences. Science. 321 (5890), 824-826 (2008).
  13. Sharma, J., et al. Control of self-assembly of DNA tubules through integration of gold nanoparticles. Science. 323 (5910), 112-116 (2009).
  14. Douglas, S. M., Dietz, H., Liedl, T., Högberg, B., Graf, F., Shih, W. M. Self-assembly of DNA into nanoscale three-dimensional shapes. Nature. 459 (7245), 414-418 (2009).
  15. Andersen, E. S., et al. Self-assembly of a nanoscale DNA box with a controllable lid. Nature. 459 (7243), 73-76 (2009).
  16. Dietz, H., Douglas, S. M., Shih, W. M. Folding DNA into twisted and curved nanoscale shapes. Science. 325 (5941), 725-730 (2009).
  17. Zheng, J. P., et al. From molecular to macroscopic via the rational design of self-assembled 3D. DNA crystal. Nature. 461 (7260), 74-77 (2009).
  18. Han, D., et al. DNA origami with complex curvatures in three-dimensional space. Science. 332 (6024), 342-346 (2011).
  19. Liu, W., Zhong, H., Wang, R., Seeman, N. C. Crystalline two-dimensional DNA origami arrays. Angew. Chem. Int. Ed. 50 (1), 264-267 (2011).
  20. Zhao, Z., Liu, Y., Yan, H. Organizing DNA origami tiles into larger structures using preformed scaffold frames. Nano Lett. 11 (7), 2997-3002 (2011).
  21. Woo, S., Rothemund, P. Programmable molecular recognition based on the geometry of DNA nanostructures. Nat. Chem. 3 (8), 620-627 (2011).
  22. Delebecque, C. J., Lindner, A. B., Silver, P. A., Aldaye, F. A. Organization of intracellular reactions with rationally designed RNA assemblies. Science. 333 (6041), 470-474 (2011).
  23. Lin, C., Liu, Y., Rinker, S., Yan, H. DNA tile based self-assembly: building complex nanoarchitectures. ChemPhysChem. 7 (8), 1641-1647 (2006).
  24. Seeman, N. C. Nanomaterials based on DNA. Annu. Rev. Biochem. 79 (1), 65-87 (2010).
  25. Voigt, N. V., Nangreave, J., Yan, H., Gothelf, K. V. DNA origami: a quantum leap for self-assembly of complex structures. Chem. Soc. Rev. 40 (12), 5636-5646 (2011).
  26. Wei, B., Dai, M., Yin, P. Complex Shapes self-assembled from single stranded DNA tiles. Nature. 485 (7400), 623-626 (2012).
  27. Wei, B., Wang, Z., Mi, Y. Uniquimer: software of de novo DNA sequence generation for DNA self-assembly: an introduction and the related applications in DNA self-assembly. J. Comput. Theor. Nanosci. 4 (1), 133-141 (2007).
  28. Seeman, N. C. De novo design of sequences for nucleic acid structural engineering. J. Biomol. Struct. Dyn. 8 (3), 573-581 (1990).
  29. Hansma, H. G., Laney, D. E. DNA binding to mica correlates with cationic radius: assay by atomic force microscopy. Biophys. J. 70 (4), 1933-1939 (1996).
  30. Seelig, G., Soloveichik, D., Zhang, D. Y., Winfree, E. Enzyme-free nucleic acid logic circuits. Science. 314 (5805), 1585-1588 (2006).
  31. Yin, P., Choi, H. M. T., Calvert, C. R., Pierce, N. A. Programming biomolecular self-assembly pathways. Nature. 451 (7176), 318-322 (2008).
check_url/pt/52486?article_type=t

Play Video

Citar este artigo
Wei, B., Vhudzijena, M. K., Robaszewski, J., Yin, P. Self-assembly of Complex Two-dimensional Shapes from Single-stranded DNA Tiles. J. Vis. Exp. (99), e52486, doi:10.3791/52486 (2015).

View Video