Journal
/
Engenharia
/
Implementation of a Reference Interferometer for Nanodetection
JoVE Journal
Engenharia
Author Produced
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Implementation of a Reference Interferometer for Nanodetection

Implementation of a Reference Interferometer for Nanodetection

DOI:
10.3791/51133-v

•

16:11 min

•

April 26, 2014

•

, ,
1Department of Electrical and Computer Engineering,University of Victoria

Capítulos

  • 00:00Título
  • 01:36Reference Interferometer Construction
  • 03:01Free Spectral Range Measurement
  • 03:57Fiber Pulling
  • 06:46Preparation and Delivery of Solutions
  • 12:43System Configuration and Interconnections
  • 14:06Nanoparticle Detection
  • 14:45Post-processing of Data
  • 15:32Conclusion

Summary

Tadução automática

Tadução automática

A reference interferometer technique, which is designed to remove undesirable laser jitter noise for nanodetection, is utilized for probing an ultra-high quality factor microcavity. Instructions for assembly, setup, and data acquisition are provided, alongside the measurement process for specifying the cavity quality factor.

Tags

Reference InterferometerNanodetectionFiber InterferometerMicrocavityFree Spectral RangeFiber TaperLaser Jitter NoisePolystyrene NanobeadsAdaptive Curve FittingQuality FactorResonant WavelengthSplit Frequency ShiftsBinding Events

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Analysis of Contact Interfaces for Single GaN Nanowire Devices

Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

Spark Plasma Sintering Apparatus Used for the Formation of Strontium Titanate Bicrystals

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

Design and Implementation of a Bespoke Robotic Manipulator for Extra-corporeal Ultrasound

Read Article