Journal
/
Engenharia
/
Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators

DOI:
10.3791/51251-v

•

11:44 min

•

August 15, 2014

•

, , , ,
1Department of Electrical and Computer Engineering,University of California, Davis, 2Digital Light Projection (DLP) Technology Development,Texas Instruments, 3Birck Nanotechnology Center and the Department of Electrical and Computer Engineering,Purdue University

Capítulos

  • 00:05Título
  • 01:08Fabrication of Electrostatic Fringing-field Actuated (EFFA) MEMS Fixed-fixed Beams
  • 08:28Experimental Validation of Dynamic Waveform Biasing
  • 10:23Results: Measured Pull-down and Released States of a MEMS Bridge
  • 11:16Conclusion

Summary

Tadução automática

Tadução automática

The robust device design of fringing-field electrostatic MEMS actuators results in inherently low squeeze-film damping conditions and long settling times when performing switching operations using conventional step biasing. Real-time switching time improvement with DC-dynamic waveforms reduces the settling time of fringing-field MEMS actuators when transitioning between up-to-down and down-to-up states.

Tags

Real-time DC-dynamic BiasingSwitching Time ImprovementUnderdamped Fringing-field Electrostatic MEMS ActuatorsFast Switching OperationSettling TimeTransient Applied Bias WaveformsMechanical Quality FactorSubstrate RemovalReliabilityStictionCharge PumpCMOS ProcessingExperimental ValidationSwitching Time Improvement

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization

Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale

Fabrication of 3D Carbon Microelectromechanical Systems (C-MEMS)

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters

Growth and Electrostatic/chemical Properties of Metal/LaAlO3/SrTiO3 Heterostructures

Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers

Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures

Rapid Manufacturing of Thin Soft Pneumatic Actuators and Robots

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx

Read Article