Journal
/
Engenharia
/
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
JoVE Journal
Engenharia
É necessária uma assinatura da JoVE para visualizar este conteúdo.  Faça login ou comece sua avaliação gratuita.
JoVE Journal Engenharia
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

DOI:
10.3791/54923-v

•

08:29 min

•

January 10, 2017

•

, , ,
1Department of Mechanical Engineering,National Institute of Technology, Oyama College, 2Ashizawa Finetech Ltd.

Capítulos

  • 00:05Título
  • 01:22Indium Tin Oxide (ITO) Glass Preparation
  • 02:50Preparation and Fabrication of the Photoactive Layer
  • 05:21Fabrication and Measurement of the Solar Cell
  • 06:47Results: Phase Separation and Current–Voltage Characteristics of Ti(IV)-alkoxide Bulk-heterojunction (BHJ) Solar Cells
  • 07:57Conclusion

Summary

Tadução automática

Tadução automática

A method for fully printable, fullerene-free, highly air-stable, bulk-heterojunction solar cells based on Ti alkoxides as the electron acceptor and the electron-donating polymer fabrication is described here. Moreover, a method for controlling the morphology of the photoactive layer through the molecular bulkiness of the Ti-alkoxide units is reported.

Tags

Keywords: Organic-inorganic HybridBulk-heterojunction Solar CellsTitanium AlkoxidesMorphology ControlPhase-separationPFO-DVTP3HTPTV7ITO Glass SubstrateHydrochloric Acid EtchingUltrasonic CleaningUV-ozone CleaningChlorobenzeneSpin-coatingAnnealing

Article

Embed

ADICIONAR À PLAYLIST

Usage Statistics

Vídeos Relacionados

check_url/pt/54923?article_type=v

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates
check_url/pt/54923?article_type=v

Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light
check_url/pt/54923?article_type=v

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
check_url/pt/54923?article_type=v

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells
check_url/pt/54923?article_type=v

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells
check_url/pt/54923?article_type=v

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics
check_url/pt/54923?article_type=v

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
check_url/pt/54923?article_type=v

Installation Method to Enhance Quality Control for Fiber Reinforced Polymer Spike Anchors
check_url/pt/54923?article_type=v

Developing High Performance GaP/Si Heterojunction Solar Cells
check_url/pt/54923?article_type=v

O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression

Read Article