14.12:
Assessing Blood pressure in the Leg
Steps for measuring blood pressure in the leg include the following.
Start by performing hand hygiene.
To measure BP in the thigh, assist the patient to a prone or supine position with a slightly flexed knee to ensure easy access to the artery.
Gently feel the pulse of the popliteal artery, position the cuff above the popliteal fossa, and place the stethoscope over the popliteal fossa.
To measure BP in the calf, help the patient to a prone or supine position with a slightly flexed knee and palpate the dorsalis pedis or posterior tibial artery pulse.
Apply the cuff over the lower half of the calf one inch above the malleoli and place the stethoscope at the malleoli.
Close and tighten the valve to avoid air leaks.
Slowly inflate the cuff until the first korotkoff sound indicates systolic blood pressure. Gradually deflate and observe where the sound disappears, indicating diastolic blood pressure.
Deflate and remove the cuff. Assist the patient to a comfortable position.
Replace equipment after cleaning. Wash hands and record the findings.
14.12:
Assessing Blood pressure in the Leg
Proper measurement of leg blood pressure is a critical skill for healthcare providers, ensuring precise and reliable readings. When performed correctly, this procedure informs patient care and enhances the efficacy of interventions. The following text outlines step-by-step guidelines to measure blood pressure in the leg, providing clarity and ease of understanding for practitioners.
Preparation:
- • Begin the procedure with comprehensive hand hygiene, using bactericidal soap or an alcohol-based rub to reduce the transmission of infectious agents.
Patient Positioning and Cuff Placement for Thigh Measurement:
- • Position the patient prone to access the popliteal artery unobstructed.
- • If prone positioning is not feasible, a supine position with the knee slightly flexed is acceptable.
- • Ensure the patient's legs are not crossed to prevent artificially elevated blood pressure readings.
- • Remove any clothing that may constrict the thigh, as this could impede the proper expansion of the cuff and distort the reading.
- • After palpating the popliteal pulse, place the blood pressure cuff on the lower third of the thigh. Align the cuff's markers directly over the artery and position it one inch above the knee's crease to ensure effective artery compression during inflation.
Cuff Placement for Calf Measurement:
- • Palpate the dorsalis pedis or posterior tibial pulse in the calf. Position the cuff over the lower calf, one inch above the ankle bones or malleoli, ensuring it is at the proper height for accurate pressure application.
Stethoscope Positioning:
- • Place the stethoscope's diaphragm just below the cuff's lower edge to avoid muffling the Korotkoff sounds, which are crucial for determining blood pressure.
Inflation and Deflation Technique:
- • Securely close the sphygmomanometer's valve and inflate the cuff quickly to a pressure exceeding the expected systolic reading to ensure complete artery occlusion for accurate systolic pressure measurement.
- • Slowly deflate the cuff, listening carefully for the first Korotkoff sound to identify the systolic pressure. Maintain a slow deflation rate to accurately capture the moment the sound ceases, indicating the diastolic pressure.
Post-Procedure Care:
- • Immediately after measurement, fully deflate the cuff and help the patient into a comfortable position.
- • Clean and store the equipment to maintain sanitation standards.
- • Perform hand hygiene to minimize the risk of contamination.
- • Record the measured blood pressure values in the patient's record or the designated vital signs chart, ensuring accurate documentation of the patient's health status.