12.5:
Modes of Operations of BJT
A bipolar junction transistor has four modes of operation, depending upon the voltage polarities at the emitter-base junction and the collector-base junction.
In the active mode, the emitter-base junction is forward-biased, allowing electron injection from the emitter to the base. The base-collector junction is reverse-biased, blocking the flow of majority carriers.
In this mode, the transistor operates as an amplifier, with a small base current controlling a larger collector current.
In the saturation mode, both junctions are forward-biased. This mode corresponds to a small biasing voltage and a large output current, effectively acting as a closed switch.
The cut-off mode occurs when both junctions are reverse-biased, resulting in no current flow between the terminals. The transistor acts as an open switch.
In the inverted mode, the emitter-base junction is reverse-biased, while the collector-base junction is forward-biased. It is often called the inverted active mode, where the collector becomes the emitter and vice versa.
This mode has lower current gain due to reduced "emitter efficiency" caused by lower collector doping compared to base doping.
12.5:
Modes of Operations of BJT
A Bipolar Junction Transistor (BJT) is a versatile component in electronics, functioning in four distinct modes based on the biasing of its junctions: active, saturation, cut-off, and inverted modes.
Active Mode: The most common mode for amplification, the active mode features a forward-biased emitter-base junction and a reverse-biased base-collector junction. This setup enables electrons to be injected from the emitter to the base while blocking the majority carriers at the collector. The outcome is significant amplification, with a small base current manipulating a considerably larger collector current.
Saturation Mode: In this mode, the emitter-base and base-collector junctions are forward-biased. The saturation mode is analogous to a closed switch, with minimal voltage bias and maximal current output. This mode is typical in switching operations where the transistor needs to conduct a high current across its terminals.
Cut-off Mode: Here, both junctions are reverse-biased, effectively halting any current flow through the transistor, similar to an open switch. This mode stops current flow, which is critical in digital circuits for representing an 'off' state.
Inverted Mode: Uncommon in most applications, the inverted mode involves a reverse-biased emitter-base junction and a forward-biased collector-base junction. This arrangement reverses the roles of the collector and emitter. The inverted mode is characterized by lower current gain, primarily due to the lesser efficiency of the collector acting as an emitter due to its lower doping levels compared to the base.
Each mode of operation enables the BJT to perform various functions in electronic circuits, from amplification in the active mode to switching functions in saturation and cut-off modes, thereby highlighting the component's adaptability and importance in electronic design and functionality.