Summary

Fabricação de White Light-emitting células eletroquímicas com emissão estável de Exciplexes

Published: November 15, 2016
doi:

Summary

The authors present a method for fabricating stable white-light-emitting electrochemical cells utilizing emission from exciplexes formed between a blue-emitting fluorene polymer and aromatic amines.

Abstract

Os autores apresentam uma abordagem para a fabricação de emissão de luz branca estável a partir de células electroquímicas polímero emissor de luz (PLECS) possuindo uma camada activa que consiste de poli-azul fluorescente (9,9-di-n-dodecylfluorenyl-2,7-di-ilo) ( PFD) e moléculas trifenilamina π-conjugados. Esta emissão de luz branca origina de exciplexes formados entre PFD e aminas em estados electronicamente excitado. Um dispositivo contendo PFD, 4,4 ', 4' '- tris [2-naftilo (fenil) amino] trifenilamina (2-TNATA), poli (óxido de etileno) e K 2 CF 3 SO 3 mostrou a emissão de luz branca com Commission Internationale de l'éclairage (CIE) coordenadas (0,33, 0,43) e um índice de restituição cromática (CRI) de Ra = 73 em uma voltagem aplicada de 3,5 V. medições de tensão constante mostrou que a CIE coordenadas (0,27, 0,37), Ra de 67, e a cor da emissão observada imediatamente após a aplicação de uma tensão de 5 V eram quase inalterado e estável depois300 seg.

Introduction

Research and development of polymer light-emitting electrochemical cells (PLECs) have expanded in recent years.1-15 PLECs are similar to organic light-emitting diodes (OLEDs) in that both are surface emitting organic devices and are expected to find their way into future lighting applications. OLEDs are already on the market, but the cost is still high, one reason being that OLEDs need a complicated device structure with multiple layers. In contrast, PLECs have a very simple device structure which consists of a single active layer (emitting layer) between a pair of electrodes. This means that PLECs are suited to mass production processes such as roll-to-roll printing and coating.

A PLEC has an active layer consisting of a fluorescent π-conjugated polymer (FCP). The FCP can be electrochemically doped with a polymer electrolyte (a mixture of an ion conducting polymer and a salt). The FCP is p-doped on the anode side and n-doped on the cathode side during operation, and generates excitons which emit light between the p- and n-doped regions. Therefore, the emission color reflects the exciton emission (=fluorescence) wavelength of the FCP.

Stable white light emission is important for lighting applications, and color mixing techniques which employ two or more emitters have been widely used to achieve this.10-14 Recently, we presented a different approach for obtaining stable white light emission, using an active layer which contains blue-fluorescent poly(9,9-di-n-dodecylfluorenyl-2,7-diyl) (PFD) and π-conjugated aromatic amines15. This white light emission comes from exciplexes formed between PFD and amine molecules in excited states. Exciplex emission has a broader spectrum compared to the exciton emission from the PDF and/or amines, which gives it a color close to that of natural light. This translates to a higher color rendering index (CRI), which is preferable for lighting applications.

In this article, the authors describe the procedure used to fabricate the exciplex based LECs and show the stability of their white light emission.

Protocol

1. Preparação de Soluções de camada Activo Solução camada ativa para os dispositivos PFD amina dopado NOTA: O PFD, 4,4 ', 4' '- tris [2-naftilo (fenil) amino] trifenilamina (2-TNATA), 9,9-dimetil-N, N' -di (1-naftil) – N , N '-difenil-9H-fluoreno-2,7-diamina (DMFL-NPB), poli (óxido de etileno) (PEO), foram utilizados como recebidos. O trifluorometanossulfonato de potássio (K 2 CF 3 SO 3) foi seco sob vácuo …

Representative Results

A eletroluminescência (EL) espectros foram usadas para calcular as coordenadas CIE e valores CRI (Figuras 2, 4, 5). As imagens fotográficas dos dispositivos emissores de luz foram recolhidas para se verificar a brancura da emissão (Figura 3). Os espectros de EL dos dispositivos PFD amina dopado e não dopado o dispositivo de DFP são mostrados na Figura 2. O dispositivo PFD…

Discussion

A LEC tem uma camada activa contendo PFD hidrofóbico e aminas aromáticas, e óxido de polietileno hidrófilo e KCF 3 SO 3. Uma vez que estes materiais têm solubilidades muito diferentes, uma preparação cuidadosa da solução de revestimento por rotação é crítico para evitar a solvatação incompleta. Cada um deve ser primeiro dissolvido separadamente e completamente em solventes de solvatação com capacidade suficiente, então as soluções são misturadas em conjunto para formar uma mist…

Disclosures

The authors have nothing to disclose.

Acknowledgements

Este trabalho foi parcialmente financiado por um Grant-in-Aid para a Investigação Científica (No. 24.225.003). Este trabalho foi apoiado financeiramente pela JX Nippon Oil & Energy Corporation.

Materials

Poly(9,9-di-n-dodecylfluorenyl-2,7-diyl) (PFD) Aldrich 571660
4,4’,4’’-Tris[2-naphthyl(phenyl)amino]triphenylamine (2-TNATA) Aldrich 768669
9,9-Dimethyl-N,N’-di(1-naphthyl)-N,N’-diphenyl-9H-fluorene-2,7-diamine (DMFL-NPB) Aldrich
Poly(ethylene oxide) (PEO) Aldrich 182028
Potassium tirifluoromethansulfonate (KCF3SO3) Aldrich 422843 dried under vacuum at 200 °C for 2 hr prior to use
Chloroform Kanto Chemical Co. 08097-25 dehydrated
Cyclohexanone Kanto Chemical Co. 07555-00
SCAT 20-X (detergent) Daiichi Kogyo Seiyaku diluted with water
Acetone Kanto Chemical Co. 01866-25 Electronic grage
2-propanol Kanto Chemical Co. 32439-75 Electronic grage
13mm GD/X Disposable Filter Device PVDF Filter Media, Polypropylene Housing Whatman 6872-1304
UV/O3 Treating Unit SEN Lights Co.  SSP16-110
Spectral Photo Detector Otsuka Electronics MCPD 9800
Voltage Current Source Monitor  ADCMT 6241A 
Evaporation Mask  Tokyo Process Service Co., Ltd. NA The evaporation mask was wet-etched to create openings for patterned deposition of aluminum. The size of the mask is 100 mm x 100 mm x 0.2 mm-thick.

References

  1. Pei, Q., Yu, G., Zhang, C., Yang, Y., Heeger, A. J. Polymer light-emitting electrochemical cells. Science. 269 (5227), 1086-1088 (1995).
  2. Sun, Q., Li, Y., Pei, Q. Polymer light-emitting electrochemical cells for high-efficiency low-voltage electroluminescent devices. J. Disp. Technol. 3 (2), 211-224 (2007).
  3. Meier, S. B., et al. Light-emitting electrochemical cells: recent progress and future prospects. Mater. Today. 17 (5), 217-223 (2014).
  4. Edman, L., et al. Single-component light-emitting electrochemical cell fabricated from cationic polyfluorene: Effect of film morphology on device performance. J. Appl. Phys. 98 (4), 044502 (2005).
  5. Fang, J., Matyba, P., Edman, L. The Design and Realization of Flexible, Long-Lived Light-Emitting Electrochemical Cells. Adv. Funct. Mater. 19 (16), 2671-2676 (2009).
  6. Yu, Z., et al. Stabilizing the Dynamic p− i− n Junction in Polymer Light-Emitting Electrochemical Cells. J. Phys. Chem. Lett. 2 (5), 367-372 (2011).
  7. Sandström, A., Dam, H. F., Krebs, F. C., Edman, L. Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating. Nat. Commun. 3, 1002 (2012).
  8. Liang, J., Li, L., Niu, X., Yu, Z., Pei, Q. Elastomeric polymer light-emitting devices and displays. Nat. Photonics. 7 (10), 817-824 (2013).
  9. Yang, Y., Pei, Q. Efficient blue-green and white light-emitting electrochemical cells based on poly 9, 9-bis (3, 6-dioxaheptyl)-fluorene-2, 7-diyl. J. Appl. Phys. 81 (7), 3294-3298 (1997).
  10. Tang, S., Buchholz, H. A., Edman, L. White Light from a Light-Emitting Electrochemical Cell: Controlling the Energy-Transfer in a Conjugated Polymer/Triplet-Emitter Blend. ACS Appl. Mater. Iterfaces. 7 (46), 25955-25960 (2015).
  11. Nishikitani, Y., Takizawa, D., Nishide, H., Uchida, S., Nishimura, S. White Polymer Light-Emitting Electrochemical Cells Fabricated Using Energy Donor and Acceptor Fluorescent π-Conjugated Polymers Based on Concepts of Band-Structure Engineering. J. Phys. Chem. C. 119 (52), 28701-28710 (2015).
  12. Sun, M., Zhong, C., Li, F., Cao, Y., Pei, Q. A Fluorene− Oxadiazole Copolymer for White Light-Emitting Electrochemical Cells. Macromolecules. 43 (4), 1714-1718 (2010).
  13. Tang, S., Pan, J., Buchholz, H., Edman, L. White Light-Emitting Electrochemical Cell. ACS Appl. Mater. Interfaces. 3 (9), 3384-3388 (2011).
  14. Tang, S., Pan, J., Buchholz, H. A., Edman, L. White light from a single-emitter light-emitting electrochemical cell. J. Am. Chem. Soc. 135 (9), 3647-3652 (2013).
  15. Nishikitani, Y., et al. White polymer light-emitting electrochemical cells using emission from exciplexes with long intermolecular distances formed between polyfluorene and π-conjugated amine molecules. J. Appl. Phys. 118 (22), 225501 (2015).
  16. Tang, S., Mindemark, J., Araujo, C. M. G., Brandell, D., Edman, L. Identifying Key Properties of Electrolytes for Light-Emitting Electrochemical Cells. Chem. Mater. 26 (17), 5083-5088 (2014).

Play Video

Cite This Article
Uchida, S., Takizawa, D., Ikeda, S., Takeuchi, H., Nishimura, S., Nishide, H., Nishikitani, Y. Fabrication of White Light-emitting Electrochemical Cells with Stable Emission from Exciplexes. J. Vis. Exp. (117), e54628, doi:10.3791/54628 (2016).

View Video