Photogrammetric Three-dimensional Modeling and Printing of Cetacean Skeleton using an Omura's Whale Stranded in Hong Kong Waters as an Example

Summary

The bone morphology of a semi-degreased baleen whale was documented by photogrammetry with a DSLR camera to generate three-dimensional (3D) models by computer, which were 3D printed as half-sized replicas of the original for display and educational purposes.

Abstract

The preparation of cetacean, in particular baleen whale, skeletons presents a great challenge due to their high lipid content and uncommon size. Documentation of the skeletal morphology is important to produce accurate and reliable models for both research and educational purposes. In this paper, we used a 10.8-meter long Omura’s whale stranded in Hong Kong waters in 2014 as an example for the illustration. This rare and enormous specimen was defleshed, macerated, and sun-dried to yield the skeleton for research and public display. Morphology of each bone was then documented by photogrammetry. The complex contour of the skeleton made automated photoshoot inadequate and 3 manual methods were used on bones of different sizes and shapes. The captured photos were processed to generate three-dimensional (3D) models of 166 individual bones. The skeleton was printed half-size with polylactic acid for display purposes, which was easier to maintain than the actual cetacean bones with high residual fat content. The printed bones reflected most anatomical features of the specimen, including the bowing out rostral region and the caudal condylar facet that articulated with Ce1, yet the foramina on the parieto-squamosal suture, which are diagnostic character of Balaenoptera omurai, and an indented groove on the frontal bone at the posterior end of the lateral edge were not clearly presented. Extra photoshoots or 3D surface scanning should be performed on areas with meticulous details to improve precision of the models. The electronic files of the 3D skeleton were published online to reach a global audience and facilitate scientific collaboration among researchers worldwide.

Introduction

Cetacean strandings offer valuable opportunities to learn about their life history, biological health and profile, as well as the effect of anthropogenic actions to the ecosystem. Three-dimensional (3D) representation and modeling allow accurate representation of morphometric measurements that can be used for biomechanical calculations and give insights on various physiological behaviors¹. Morphological adaptations have allowed these animals to survive in the ocean, while some pathologies observed in stranded cetaceans could reveal their biological health and profile, anthropogenic and non-anthropogenic circumstances or cause of death^2,3. Bone lesion followed by traumatic collision may remain unhealed since the animals are required to swim continuously under tremendous underwater pressure⁴. In marine mammals, compression and non-fatal gas embolism may decrease blood supply to the bones and cause barotraumas⁵. Adverse bone remodeling may result in both pain and decreased spinal mobility that compromises their survival upon predation or other threats. Increases in the reporting of mortality and morbidity in cetaceans worldwide also indicated the possible decline in ocean health^6,7. Recognizing the importance of the ocean and the inextricable links between human health and cetacean and ecosystem health has led to the ‘One Ocean−One Health’ research paradigm⁸.

On March 31st 2014, an Omura’s whale (Balaenoptera omurai) stranded near Hung Shek Mun, Plover Cove Country Park, Hong Kong. It was a 10.8-meter adult female, and only a few of these species have been found in the Indo-Pacific region since it was first discovered in 2003⁹. The beaching of a whale of this size is not common in Hong Kong, therefore, this event presented an opportunity to preserve the skeleton for research and educational purposes. The beached animal was dissected and defleshed at the site of discovery, with the majority of external muscles and internal organs removed. Gross necropsy revealed that the carcass was in an advanced state of autolysis but had multiple deep lacerations crisscrossing the body, the most severe of them centered on the right pectoral fin with a deep transverse laceration extending throughout the bone, demonstrating a certain degree of confident linkage of entanglement evidence with an observed condition of the mortality. The skeletal remains were transported to a location in Lantau island by the Agriculture, Fisheries, and Conservation Department of the Government of the Hong Kong Special Administrative Region, where maggots were utilized to consume the soft tissues. The bones were degreased by water maceration for 2 months with manual scrubbing. Despite a significant amount of bone fat being extracted, the skeleton, in particular the skull and rib edges, remained brown in color. The residual fat was difficult to remove and if left untreated, would attract rodents, deteriorate, and render the specimen unfit for presentation. Even with perfect conservation conditions, animal bones can still be decomposed by various dust-inhabiting microorganisms¹⁰. It was decided to have the morphology of the semi-degreased skeleton digitally documented and then 3D printed with durable materials as a sanitary replica of the original.

Biological specimen 3D models can be generated by several means, including medical imaging, surface scanning, and photogrammetry. Medical imaging modalities like Computed Tomography (CT) and Magnetic Resonance Imaging produce multiplanar images that include both external and internal features, but lack color and texture. CT has been utilized to document the anatomy or pathology of flukes, baleen, and cranium of various species, revealing their unique adaptation in locomotion, foraging, and neurodevelopment^{11,12,13,14,15,16}. Surface scanning projects either laser or structure light on the object, where the pattern of reflection is converted to geometric data by trigonometric triangulation to generate a surface model. Photogrammetry records a series of slightly overlapping photos of the target. Either the camera rotates around the object, or the object is rotated on a turntable upon shooting. The process is repeated with different camera angles and heights before the object is turned over to capture the underside likewise. Photos are imported into a modeling software, which calculates location and distance of each feature in 3D space to produce point clouds. The geometric information is processed by triangulation of the point clouds to generate polygonal meshes, which can be edited and manufactured. 3D reconstruction can reflect accurate measurements of scanned surfaces and volumes¹⁷.

Photogrammetry was considered a suitable approach for 3D documentation of the Omura’s whale skeleton in view of its low equipment cost, adequate output quality, and flexibility in dealing with bones of largely variable sizes and shapes. For instance, the whale skull measured 2.6 meters, which made miniature methods like laser 3D surface scanning unfeasible. The equipment required for photogrammetry is readily accessible – only a digital camera with high capture resolution (>5 megapixels) and a modeling software, which is much cheaper than the optic or laser scanners for 3D surface scanning. In addition, 3D surface scanning requires the scanner to be connected to a reasonably high-performance computer during data collection, both of which require an independent power supply. 3D surface scanning is inapplicable when a power source is absent, for instance in case of very large specimens with limited transportability, or when the original whale carcass is to be scanned on-site. For photogrammetry, only a digital camera, a tripod, and a supporting apparatus such as a turntable are needed. Photogrammetry is therefore a more affordable option with high portability for small research groups to start with.

Digital models are transformed into physical products by 3D printing. Layers of melted poly-lactic acid (PLA) are stacked and solidified to reproduce the whale skeleton. The realistic replica, printed half-size, can be used for public display and educational purposes. For students and layman in general, touching anatomical models can help them appreciate the animal not only visually but also by sensation. For professionals like young clinicians and scientists, it can be difficult to understand complicated structures from 2D pictures¹⁸. Traditionally, biological specimens undergo plastination to become educational adjuncts, yet the process is quite complicated, resource-demanding, and time-consuming. Carcasses may possess biological hazards, and only one model is generated from each specimen. 3D documentation and printing offer interactive experiences that are more enjoyable than textbooks or virtual animations. Even virtual dissection cannot offer the benefits of tangible manipulation and is thus unpopular among students¹⁹. With 3D printing technology, multiple copies of a rare specimen can be replicated, held in hand, and studied closely from different angles, without undesirable odor or the fear of breaking them²⁰. The product can be customized, for example scaled down for easy manipulation or printed in different colors for aesthetic illustration. The 3D models can also be digitally edited to restore broken or missing parts which allows greater versatility. 3D documentation and printing also facilitate knowledge sharing among researchers. A skeletal remain can be digitally recorded, shared online, and printed on demand. Specimens can be “prototyped” and distributed overseas as a standard parcel instead of a biological sample, which requires special quarantine or legal documentation. Electronic 3D models comprising key metrics of the whale bones are also shared online with other institutes to facilitate scientific collaborations among researchers worldwide.

Protocol

1. Preparation Assemble the semi-degreased whale skeleton. Designate a code for each piece of bone. The code will be used in the photoshoot, 3D model generation, and 3D printing. 2. Photogrammetry Camera and tripod settings Use a standard lens with focal length of 24-70 mm, diameter of 77-82 mm, and f number of 2.8 L. Avoid wide-angle lenses. Use a compatible tripod with adjustable height of 40-150 cm. …

Representative Results

In this study, 166 pieces of bone were scanned individually and the 1 mm resolution 3D models were saved in .STL format. The stereolithography format records surface geometry of 3D objects without color or texture, which is common for 3D printing. The complete 3D model of the Omura’s whale skeleton was uploaded online for public access (https://www.cityu.edu.hk/cvmls/omura). The skull was printed with a professional 3D printer due to its large size. The rest of the skeleton was printed with an in-house 3D pr…

Discussion

Skeletons for exhibition should be oil-free and odorless. Whale bones are notoriously oily, which makes their preparation exceptionally challenging. A juvenile blue whale stranded in 1998 had its skeletal remains exhibited in the New Bedford Whaling Museum, Massachusetts. Despite tremendous treatment by professionals, the bones remained yellowish with an unpleasant odor, and has been oozing oil continuously for over 20 years²¹. With little experience in handling whales in Hong Kong, great effort w…

Materials

EF 24-70mm 1:2.8 L II USM	Canon	NA	Camera lens
EOS 5DSR	Canon	NA	Camera
ideaMaker 3.6.1	Raise 3D	NA	3D printing software
MVKBFRL-LIVEUS	Manfrotto	NA	Camera tripod
N2 Plus	Raise 3D	NA	3D printer
Agisoft Metashape 1.6.4 (Professional Edition)	Agisoft	NA	3D modeling software
Poly-lactic acid	Raise 3D	NA	3D printing material
Precision 9010 CPU: 2 x Xeon E5-2620 v3	Dell	NA	Computer