Antoine Rouilly LABORATORY OF AGRO-INDUSTRIAL CHEMISTRY ÉCOLE NATIONALE SUPÉRIEURE DES INGÉNIEURS EN ARTS CHIMIQUES ET TECHNOLOGIQUES (ENSIACET)INRAE & TOULOUSE UNIVERSITY, FRANCE Biography Publications Institution JoVE Articles Antoine Rouilly Antoine Rouilly is an associate professor in Toulouse University and does his research work in the Laboratory of Industrial Chemistry. He is since 2014 the scientific head of one of the lab topic “Biopolymer Processing”, gathering the work of a team of 5 permanent research staffs and 5-10 PhD and Master students. He studied organic chemistry Toulouse, and graduated in 1998 with Degree of Chemical Engineer (BSc) at the École Nationale Supérieure de Chimie de Toulouse (ENSCT). He obtained his Ph.D. in 2002 from the Toulouse University, with a thesis on the injection-molding of two specific agricultural by-products : sunflower oilcake and sugar beet pulp, performed at the Laboratory of Agro-industrial Chemistry, Toulouse. He obtained his habilitation to supervise researches (HDR) in 2018.Antoine Rouilly’s scientific interest concerns mainly the processing of biopolymers for non-food applications leading to 100% natural materials called agromaterials. The processes used range from twin-screw extrusion to injection-molding and uniaxial compression. His major scientific question is linked to the biopolymer-water interactions and the state of adsorbed water under temperature and pressure. To improve the properties of agromaterials and better control all the process, he has also worked a lot on physical-chemstry characterization of biopolymers through mechanical, thermal and surface analyses. In the last years, he has been engaged in several national and international research projects and industrial contracts.His Ph.D. work has been awarded with the “Le Monde” thesis prize in 2002. Publications Natural Fibre Polymer Composites-A game changer for the aviation sectorJOURNAL OF CLEANER PRODUCTION. 2021 | Pubmed ID: Flax Fiber for Technical textile: a consequential life cycle inventoryJOURNAL OF CLEANER PRODUCTION. 2021 | Pubmed ID: Influence of flax fibers on network formation of DGEBA/DETA matrixCOMPOSITES INTERFACE. 2021 | Pubmed ID: Optimization of vacuum coating conditions to improve oil retention in Trout feedAQUACULTURE ENGINEERING. 2020 | Pubmed ID: Twin-screw extrusion encapsulation of MCT-oil in a maltodextrin matrix using compatibilizing biopolymersCOLLOIDS AND SURFACES B : BIOINTERFACES. 2020 | Pubmed ID: Thermo-compression of cellulose nanofibrilsCELLULOSE. 2020 | Pubmed ID: Cellulose consolidation under high-pressure and high-temperature uniaxial compressionCELLULOSE. 2019 | Pubmed ID: Influence of homogenization technique and blend ratio on chitosan/alginate polyelectrolyte complex propertiesJOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING. 2018 | Pubmed ID: Characterization of Non-Derivatized Cellulose Samples by Size Exclusion Chromatography in Tetrabutylammonium Fluoride/Dimethylsulfoxide (TBAF/DMSO)MOLECULES. 2017 | Pubmed ID: Synthesis of graft-copolymers from palm cellulose and solketal acrylate and their characterizationINDUSTRIAL CROPS AND PRODUCTS. 2017 | Pubmed ID: Comparison of two wheat bran extracts in the sheet extrusion processINDUSTRIAL CROPS AND PRODUCTS. 2016 | Pubmed ID: Structural modifications of cellulose samples after dissolution into various solvent systemsANALYTICAL AND BIOANALYTICAL CHEMISTRY. 2016 | Pubmed ID: The properties of cellulose insulation applied via the wet spray processBUILDING AND ENVIRONMENT. 2016 | Pubmed ID: Influence of DE-value on the physicochemical properties of maltodextrin samples for melt extrusion processesCARBOHYDRATE POLYMERS. 2016 | Pubmed ID: Review of melt-extrusion encapsulation processesPOLYMER REVIEWS. 2016 | Pubmed ID: Extruded versus solvent cast blends of poly(vinyl alcohol-co-ethylene) and biopolymers isolated from municipal biowasteJOURNAL OF APPLIED POLYMER SCIENCE. 2016 | Pubmed ID: A review on the properties of cellulose #bre insulationBUILDING AND ENVIRONMEN . 2016 | Pubmed ID: Chitosan and cystatin/lysozyme preparation as protective edible films componentsINTERNATIONAL JOURNAL OF POLYMER SCIENCE. 2015 | Pubmed ID: Inverse gas chromatography a tool to follow physicochemical modifi cations of pharmaceutical solids : Crystal habit and particles size surface effectsINTERNATIONAL JOURNAL OF PHARMACEUTICS. 2015 | Pubmed ID: High pressure driven solvent-free heterogeneous phase esterification of celluloseBIORESOURCES. 2015 | Pubmed ID: Binderless materials obtained by thermo-compressive process of lignocellulosic fibers : a comprehensive reviewBIORESOURCES. 2015 | Pubmed ID: Physicochemical characterization of d-mannitol polymorphs : The challenging surface energy determination by inverse gas chromatography in the infinite dilution regionINTERNATIONAL JOURNAL OF PHARMACEUTICS. 2014 | Pubmed ID: The Pressure-Volume-Temperature relationship of CelluloseCELLULOSE. 2013 | Pubmed ID: Effect of temperature on high pressure cellulose compressionCELLULOSE. 2013 | Pubmed ID: Influence of citric acid and water on thermoplastic wheat flour/poly(lactic acid) blends. II : Effect on barrier propertiesINDUSTRIAL CROPS AND PRODUCTS. 2013 | Pubmed ID: High pressure compression-molding of α -cellulose and effects of operating conditions. Advances in cellulosic materialsMATERIALS. 2013 | Pubmed ID: Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereofMATERIALS & DESIGN. 2013 | Pubmed ID: Influence of citric acid and water on thermoplastic wheat flour/poly(lactic acid) blends. I : Thermal, mechanical and morphological propertiesINDUSTRIAL CROPS AND PRODUCTS. 2012 | Pubmed ID: Thermo-mechanical processing of sugar beet pulp. III. Study of extruded films improvement with various plasticizers and cross-linkersBIORESOURCE TECHNOLOGY. 2009 | Pubmed ID: Film extrusion of sunflower protein isolatePOLYMER ENGINEERING AND SCIENCE. 2006 | Pubmed ID: Thermo-mechanical processing of sugar beet pulp. II. Thermal and rheological properties of thermoplasticSBP. CARBOHYDRATE POLYMERS. 2006 | Pubmed ID: New natural injection moldable composite material from sunflower oil cakeBIORESOURCE TECHNOLOGY. 2006 | Pubmed ID: Thermo-mechanical processing of sugar beet pulp. I. Twin-screw extrusion processCARBOHYDRATE POLYMERS. 2006 | Pubmed ID: Synthesis and properties of composites of starch and chemically modified natural rubberPOLYMER. 2004 | Pubmed ID: Rheological studies, production, and characterization of injection-molded plastics from sunflower protein isolateINDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH. 2003 | Pubmed ID: Thermal denaturation of sunflower globulins in low moisture conditionsTHERMOCHIMICA ACTA. 2003 | Pubmed ID: Effect of various plasticizers on the mechanical properties, water resistance and aging on thermomoulded films made from sunflower proteinINDUSTRIAL CROPS AND PRODUCTS. 2003 | Pubmed ID: Effects of additives on the mechanical properties, hydrophobicity and water uptake of thermo-moulded films produced from sunflower protein isolatePOLYMER. 2002 | Pubmed ID: Agro-materials : a bibliographic reviewJOURNAL OF MACROMOLECULAR SCIENCE PART C : POLYMER REVIEWS. 2002 | Pubmed ID: DSC study on the thermal properties of sunflower proteins according to their water contentPOLYMER. 2001 | Pubmed ID: Twin-Screw Extrusion Process to Produce Renewable Fiberboards Philippe Evon1, Laurent Labonne1, Saif Ullah Khan1,2,3, Pierre Ouagne3, Pierre-Yves Pontalier1, Antoine Rouilly1 1Laboratoire de Chimie Agro-industrielle (LCA), Université de Toulouse, INRAE, INPT, 2Balochistan University of Information Technology, Engineering and Management Sciences, 3Laboratoire Génie de Production (LGP), Université de Toulouse, INPT JoVE 62072 Ingegneria
Twin-Screw Extrusion Process to Produce Renewable Fiberboards Philippe Evon1, Laurent Labonne1, Saif Ullah Khan1,2,3, Pierre Ouagne3, Pierre-Yves Pontalier1, Antoine Rouilly1 1Laboratoire de Chimie Agro-industrielle (LCA), Université de Toulouse, INRAE, INPT, 2Balochistan University of Information Technology, Engineering and Management Sciences, 3Laboratoire Génie de Production (LGP), Université de Toulouse, INPT JoVE 62072 Ingegneria