We present a protocol to perform subtractive patterning of live cell monolayers on a surface. This is achieved by local and selective lysis of adherent cells using a microfluidic probe (MFP). The cell lysate retrieved from local regions can be used for downstream analysis, enabling molecular profiling studies.
The microfluidic probe (MFP) facilitates performing local chemistry on biological substrates by confining nanoliter volumes of liquids. Using one particular implementation of the MFP, the hierarchical hydrodynamic flow confinement (hHFC), multiple liquids are simultaneously brought in contact with a substrate. Local chemical action and liquid shaping using the hHFC, is exploited to create cell patterns by locally lysing and removing cells. By utilizing the scanning ability of the MFP, user-defined patterns of cell monolayers are created. This protocol enables rapid, real-time and spatially controlled cell patterning, which can allow selective cell-cell and cell-matrix interaction studies.
In their native environment, cells in biological tissues perceive a range of biochemical and physical cues directing their growth, organization, and development. Understanding these cues requires selective investigation of cell-cell and cell-matrix interactions. This necessitates the development of methods for patterning cell monolayers. Methods to geometrically separate different cell types in culture (patterning) enable broad studies of physical and chemical cues in cell biology. Most of the current approaches for patterning cell layers1–4 depend on depositing cell-adhesion proteins on surfaces or using microfabricated stencils for selective growth on substrates. In contrast, here we present a method to rapidly pattern cell monolayers in situ, i.e., cells in culture, by removing cells in selected regions of the monolayer. Methods that perform such subtractive patterning5–9 usually require specialized substrates, surface treatment, complex operation, physical contact or ablation using a laser, inadvertently affecting the live cells. We here use a microfluidic probe (MFP)10,11, a non-contact scanning microfluidic technology that hydrodynamically confines a liquid on a substrate. One important component of the MFP is the microfabricated head containing microchannels (Figure 1). The associated platform consists of syringe pumps for liquid control, stages for scanning control and an inverted microscope for visualization and feedback (Figure 2). In its basic configuration, the MFP head comprises two microchannels with apertures at the apex, one for injecting a processing liquid and the other for aspirating the injected processing liquid together with some immersion liquid (Figure 3A). During MFP operation, the apex is at a fixed distance from the substrate. When the aspiration flow rate (Qa) is sufficiently higher than the injection flow rate (Qi), i.e., Qa:Qi≥ 2.5, the processing liquid is confined on the substrate. This results in a hydrodynamic flow confinement (HFC). The region in which the processing liquid is in direct contact with the substrate is termed the footprint. For typical operating conditions, the flow of the processing liquid within the HFC is characterized by a low Reynolds number (Re ≈ 10-2) and a high Péclet number (Pe ≈ 102). This implies liquid flows in laminar regime with convection being the primary mode of mass transfer of chemical species. The numerical and analytical models for flow confinement are described elsewhere12–14.
In this paper, we use the approach of simultaneously confining multiple processing liquids, which is called hierarchical HFC (hHFC)14. To implement hHFC with the MFP, two additional apertures are needed to provide a secondary source of injection and aspiration. This enables us to confine one liquid within a second liquid. The inner (processing) liquid benefits from being shielded from stray debris on the substrate by the outer (shielding) liquid. In addition, hHFC allows operation in two modes: (i) the nested mode, in which the processing liquid in the inner HFC contacts the surface (Figure 3B), and (ii) the pinched mode, in which the inner liquid loses contact and only the outer liquid is in contact with the substrate (Figure 3C). Switching between the two modes allows users to effect or stop processing the substrate and is achieved by controlling the head-to-surface gap or by changing the ratio between the injection flows (Qi2/Qi1). For a given channel geometry, the footprint of the processing liquid on the substrate can be controlled by modulating flow conditions (Figure 3D). Sodium hydroxide (NaOH) is used as the inner processing liquid to lyse the cells, and the lysate is continuously aspirated from the surface. Because the chemical effects of the processing liquid are localized to the inner HFC footprint, the adjacent cells remain unperturbed, which allows spatiotemporal studies of cell-cell interactions. The scanning functionality of the MFP allows the creation of user-defined geometries of cell patterns (Figure 4). Further, the choice of NaOH as processing liquid accommodates downstream DNA analysis (Figure 7).
We present a versatile protocol for the subtractive patterning of cell monolayers that enables rapid generation of spatially defined cell patterns. Selective lysis of cell monolayers is performed using NaOH as the processing liquid in the hHFC. The NaOH instantaneously denatures the proteins contained in the cell membrane. We recommend the use of 50 mM concentration of NaOH to ensure downstream processing of the lysate. This concentration can be increased for more rapid cell removal, provided lysate downstream processing is not an objective. The hHFC ensures that the unprocessed surrounding areas of the cell monolayer remain unaffected and are available for either expanding the pattern or probing other properties of the cells.
The rate of cell removal is a function of both the chemistry and shear presented by the flow. We choose an operating range of flow rates to have chemistry dominant cell removal. Scanning velocities of 10 – 20 µm/sec using a NaOH injection flow rate of 6 – 8 µl/min are used to facilitate 'rapid' subtractive patterning. The rapid rate of cell removal addresses some challenges faced by surface printing based patterning approaches20,21. These methods require a mechanism to limit growth of cells in spatially defined areas, for example, by selective deposition of cell adhesion proteins via micro-contact printing and subsequent seeding of cells to obtain the pattern. They are limited by low throughput and require several sequential steps for pattern generation as well as a new stencil/stamp for each pattern. The described method does not require selective growth of cells on defined areas, and overcomes several limitations by performing subtractive patterning in contrast to printing, while not requiring any additional treatment of the cell culture substrate.
With the protocol outlined in this paper, the throughput of patterning cell monolayers is increased, while obtaining immediate visual feedback of the pattern generated. This facilitates real-time modification of the patterns. Such control might be crucial in scenarios in which cell viability on a given surface is not homogeneous. Another advantage of the method is that the same head and chemistry can be used to generate multiple patterns, thereby reducing the number of steps involved in generating a patterned cell monolayer.
The dimensions of the channels in the head and the head geometry can be scaled according to the requirements of the application, thus allowing control over the resolution of the patterning. All experiments in the current work were performed using an MFP head with fixed aperture dimensions, specifically with inner apertures at 100 × 100 µm and outer apertures at 200 × 100 µm. This design with larger outer apertures was chosen to ensure continuous operation of the hHFC without clogging of the apertures by stray cell debris. We have tested heads with inner aperture dimensions 50 × 50 µm and 50 µm spacing between them, with successful results in cell removal. Use of smaller apertures, down to 10 × 10 µm with 10 µm spacing, would permit scaling to a smaller footprint size (~ 30 × 30 µm), thus enabling a higher resolution in patterning. We observed operational issues with aperture sizes smaller than 10 µm due to clogging from particulates. Because of such operational difficulties, 100 µm is the current limit of resolution and thus a limitation of the described technique. However, we can address this using the liquid shaping ability of the hHFC. We have demonstrated that the resolution of cell removal can be tuned for a given set of aperture dimensions by controlling QI2/QI1 (Figure 4b) and the apex-to-substrate gap10,14. The stages used in the current work has a minimum step size of 100 nm. A combination of these controllable parameters can improve the spatial resolution of cell removal in terms of the footprint size and scanning distance.
If patterned co-cultures are desired to study specific cell-cell interactions between different cell types, sequential seeding and patterning can be performed using the protocol described. Finally, amplifiable DNA of high quality can be obtained from the lysate, as evident by the singular peak in the DNA melt curve (see Figure 7). We evaluated a DNA quantity of around 1.6 ng from a single footprint (about 300 cells) using qPCR, which is close to theoretical expectation (6-8 pg/cell). This indicates a quantity of the extracted DNA suitable for several downstream processes while obviating use of any DNA isolation methods. This opens up avenues for DNA-analysis-based local probing of cultured cells. The capability of hHFC to shape liquids can also be used to deposit live cells and proteins on activated surfaces, which in combination with the subtractive patterning and sequential co-culturing presented in this protocol enables the creation of complex cell and cell-matrix patterns on culture substrates. The versatility and the control provided by hHFC-based subtractive patterning of cell monolayers and the possibility of performing DNA analysis on the extracted cells, provides a powerful new tool set to biologists to perform spatially resolved studies involving cell interactions.
The authors have nothing to disclose.
This work was supported by the European Research Council (ERC) Starting Grant, under the 7th Framework Program (Project No. 311122, BioProbe). We thank Dr. Julien Autebert and Marcel Buerge for technical assistance and discussions during the development of the protocol and the platform. Prof. Petra Dittrich (ETH Zurich), Prof. Bradley Nelson (ETH Zurich), Dr. Bruno Michel and Dr. Walter Riess are acknowledged for their continuous support.
Materials | |||
Microfluidic Probe (MFP) | NA | NA | Silicon/glass hybrid probe head with channels patterned in silicon. Fabrication done in-house at IBM Research – Zürich |
Lab Tek II Chamber slides with 2 chambers | ThermoFisher scientific, USA | 154461 | 2 Chamber chamber slides for cell culture with each chamber providing an area of 4 cm^2 and capable of holding upto 3 ml of media volume |
Name | Company | Catalog Number | Comments |
Chemicals and cell lines used | |||
Sodium Hydroxide, Tris-Cl, Ethylenediaminetetraaceticacid, Rhodamine B | SigmaAldrich chemicals, USA | S5881, 252859, E9884, R6626 | Chemicals used for processing and shielding liquids |
Proteinase K | Qiagen, Germany | 19131 | protease to digest denatuired proteins |
Deconex 16 Plus | Bohrer Chemie, Switzerland | NA | Universal cleaning agent for labaratory consumables. Used for non stringent cleaning. |
DNA away | ThermoFisher scientific, USA | 7010 | Surface decontaminant that denatures DNA and DNAases. |
DMEM, high glucose, GLUTAMAX supplement | ThermoFisher scientific, USA | 10566-016 | Culturing medium for epithelial cells. |
CellTracker Green CMFDA dye | ThermoFisher scientific, USA | C7025 | Membrane permeant live cell labeling dye. Dye active for 72 hours. |
CellTracker Orange CMRA dye | ThermoFisher scientific, USA | C34551 | |
β-actin genomic primers for qPCR | Integrated DNA technologies, USA | NA | Custom oligos used for DNA quality validation and qPCR. |
MCF7 breast carcinoma cells | ATCC, USA | ATCC HTB-22 | Cell lines used to produce co-cultures. |
MDA-MB-231 breast carcinoma cells | ATCC, USA | ATCC HTB-26 | |
Name | Company | Catalog Number | Comments |
Equipment and fluidic connections | |||
Motorized high precision stages | Custom machined components. Linear axis motors from LANG GmBH, Germany | Customized linear axis stages from LT series | 3 × LT for 3 axes. LSTEP controller used for interfacing stages and PC through RS 232 port. |
Syringes | Hamilton, Switzerland | 1700 TLLX series | Interchangeable with syringes provided by other manufacturers with a 250-500 µl range. |
Nemesys low pressure syringe pumps | cetoni GmbH, Germany | NA | Component of pumping station. |
Circular M1-connector | Dolomite microfluidics, United Kingdom | 3000051 | Interface between vias in MFP head and tubing |
Tilt/rotation stage Goniometer | OptoSigma, USA | KKD-25C | Goniometer to adjust coplanarity of MFP apex |
DS Fi2 HD color camera (CCD) | Nikon, Switzerland | NA | Controlled using DS-U3 controller unit |
Name | Company | Catalog Number | Comments |
Software | |||
Win – Commander | LANG GmBH, Germany | NA | Stage control software. |
Qmix Elements | cetoni GmbH, Germany | NA | Pump control software. |
NIS Elements | Nikon, Switzerland | NA | Basic research module for image acquisition and analysis. |