This was purchased as caustic soda at the hardware store, in dry, 99% pure form. As it is widely available, there is no company specified
VeroWhite
Stratasys
The hard material used in the print
TangoBlackPlus
Stratasys
The rubber material used in the print
Support Material
Stratasys
The standard support material used by stratasys
Magill Forceps
GIMA
Infant size. This is for removing the inner molds
Stratasys Connex 350
Stratasys
If this machine is not owned, another option is to have the parts printed through a third party printing firm such as 3D-hubs to get the parts printed and shipped.
Balco Powerblast (Water Jet)
Stratasys
Euro 8-24 Set P (Air Compressor)
iSC
4007292
Syringe with blunt needle
N/A
A 20ml syringe with a 0.5mm diameter blunt needle.
Mimics 17.0 software
Materialise
This software was used to segment the heart model from the MRI. There are sevaral free MRI imaging software tools available such as InVesalius, or Osirix, although they may prove to provide less functionality.
Magics 9.0 software
Materialise
This was used to repair and smooth the .stl files generated by mimics. This smoothing can also be done in most other 3D modeling freeware.
Solidworks
Software used for editting the heart model. Most other freeware CAD software can be used to perform this stage of processing.
Thielen, M., Delbressine, F., Bambang Oetomo, S., Feijs, L. Anatomically Realistic Neonatal Heart Model for Use in Neonatal Patient Simulators. J. Vis. Exp. (144), e56710, doi:10.3791/56710 (2019).