Summary

원자 힘 현미경, 충격 들여 쓰기 및 유변학를 사용하여 뇌 조직의 멀티 스케일 기계 속성을 특성화

Published: September 06, 2016
doi:

Summary

We present a set of techniques to characterize the viscoelastic mechanical properties of brain at the micro-, meso-, and macro-scales.

Abstract

기계 모조품 또는 조직 재생 연구에 대한 여부, 뇌의 특성에 의해 영감 재료를 설계 및 엔지니어, 뇌 조직 자체는 물론 다양한 길이와 시간 규모에서 특징해야합니다. 많은 생물학적 조직과 마찬가지로 뇌 조직은 복잡한 계층 구조를 나타낸다. 그러나 대부분의 다른 조직과는 대조적으로, 뇌는 아빠의 100 단위 정도의 영의 탄성 계수를 E로, 매우 낮은 기계적 강성이다.이 낮은 강성 키 기계적 특성의 실험적 특성에 문제를 표시 할 수 있습니다. 여기, 우리는 서로 다른 길이 스케일과 로딩 속도에서 뇌 조직으로 수화, 준수 생물학적 재료의 탄성 및 점탄성 특성을 측정하도록되어 여러 가지 기계적 특성 분석 기법을 보여줍니다. 마이크로 스케일에서, 우리는 원자 힘 현미경을 사용 들여 쓰기를 사용하여 크리프 준수 및 강제 휴식 실험을 실시하고 있습니다. 메소에서케일, 우리는 진자 기반 계측 압자를 사용하여 충격 압입 실험을 수행합니다. 거시적, 우리는 주파수에 의존 전단 탄성 계수를 정량화하는 평행 판 레오 메타를 실시하고 있습니다. 우리는 또한 각 방법과 관련된 문제 및 제한 사항에 대해 설명합니다. 이 두 기술은 더 뇌의 구조를 이해하는 바이오 고무 물질을 설계하는 데 사용될 수 뇌 조직의 충분히 기계적 특성을 가능하게한다.

Introduction

생물학적 장기를 포함하는 대부분의 부드러운 조직 광물 뼈 재료 또는 설계에 비하여 기계적 및 구조적으로 복잡하고, 저 강성이고, 비선형 및 시간에 따른 변형을 나타낸다. 신체의 다른 조직에 비해 뇌 조직은 아빠 1의 100 단위 정도의 탄성 계수를 E로, 현저하게 준수합니다. 뇌 조직은 독특하고 깍지 회색과도 기능적으로 차이가 백질 영역과 구조적 이질성을 나타낸다. 이해 뇌 조직 역학 부상시 뇌의 반응을 모방하는 기계적 손상의 예측을 용이하게하고, 보호 전략 공학 있도록 재료 및 계산 모델의 설계에 도움이된다. 또한, 이러한 정보는 조직의 재생을위한 설계 목표를 고려​​하는 것이 사용될 수 있고, 더 다중 경화증 및 자폐증과 같은 질병과 관련된 뇌 조직의 구조적 변화를 이해. H의 전에, 우리는 설명하고 중간 -, 마이크로에서 뇌 조직을 포함하여 기계적으로 준수하는 조직의 점탄성 특성을 특성화 할 수있는 여러 가지 실험 방법을 설명하고, 매크로 규모.

마이크로 스케일에서, 우리는 크리프 컴플라이언스를 실시 및 원자 현미경 (AFM)을 이용하여 사용이 가능한 압입 완화 실험 강제. 일반적으로, AFM 기반 압입는 시료 2-4의 탄성률 (강성 또는 순시)를 추정하는데 사용된다. 그러나, 같은 기기는 또한 마이크로 점탄성 (또는 시간 – 속도 – 의존적) 특성 5-10를 측정하는데 사용될 수있다. 도 1에 도시 한 실험의 원리는 시간이 지남에 따라, 뇌 조직에 프로브 외팔보 AFM에 들여 힘 또는 압입 깊이의 특정 크기를 유지하고, 각각 압입 깊이와 힘의 대응 변화를 측정하는 것이다. 이러한 데이터를 사용하여, 우리는 크리프 샘플 콘텐츠를 계산할 수각각 liance J C 및 휴식 계수 G R,.

중규모, 우리는 진자 기반 인스트루먼트 나노 인 덴터를 이용하여 조직 구조 및 수분 레벨을 유지하는 유체 침지 조건에 영향을 들여 실험을 수행 하였다. 실험 장치는도 2에 도시되어있다. 진자가 조직과 접촉하여 요동으로 진동 진자 조직 내 쉴 때까지의 변위가 시간의 함수로서 기록된다 프로브. 프로브 얻어진 감쇠 고조파 진동 운동에서, 우리는 조직 (11, 12)의 (에너지 손실의 속도에 관한)의 최대 침투 깊이 X 최대 에너지 소산 용량 K 및 소산 품질 인자 Q를 계산할 수있다.

매크로 스케일에서, 우리는, 주파수 의존 전단 탄성률을 정량화하는 평행 판 레오 미터를 사용하여. 조직의 저장 탄성률 G '와 손실 탄성률 G "를 지칭 유변학이 유형에서는, 고조파 각 균주를 적용 (전단 변형을 대응하는) 공지의 진폭과 주파수 및 reactional 토크 측정 (및 전단 응력에 대응) 도 3에 도시 된 바와 같이. 상기 측정 된 토크의 결과 진폭 및 위상 지연과 시스템의 기하학적 변수부터는 관심 13,14의인가 주파수 'G'와 G를 계산할 수있다.

Protocol

윤리 정책 : 모든 실험 프로토콜 보스턴 아동 병원의 동물 연구위원회의 승인 및 실험 동물의 관리 및 사용을위한 건강 가이드의 국립 연구소에 부합했다. 1. 마우스 뇌 조직의 취득 절차 (AFM 사용 들여 쓰기 및 영향 들여 쓰기) 쥐를 마취하는 케타민 / 자일 라진 혼합물을 준비합니다. 5 mL의 케타민 (500 ㎎ / ㎖), 1 mL의 자일 라진 (20 ㎎ / ㎖) 7 ml의 0.9 % 식염수 용액을 결?…

Representative Results

그림 4는 각각 가해진 힘 또는 압입 깊이 (그림 4A, D), 부여, 크리프 준수에 대한 시간 응답 (그림 4B, E) 대 대표 들여 쓰기와 힘을 보여줍니다 및 휴식 실험을 강제로. 이러한 데이터는 시스템의 구조를 사용하여 크리프 컴플라이언스 J의 C (t)와 이완 계수 G R (t)에 힘이 뇌 (도 4C, F)의 상이한 영?…

Discussion

본 논문에서는 각 기술은 뇌 조직의 기계적 성질의 다른 측면을 측정합니다. 크리프 준수 및 응력 완화 계수는 시간에 따른 기계적 특성의 측정이다. 저장 및 손실 모듈러스는 속도 의존 기계적 특성을 나타낸다. 충격 압입은 속도 – 종속 기계적 특성을 측정하지만, 에너지 소비의 맥락이다. 조직의 기계적 특성을 특성화 할 때, 모두 AFM 사용 들여 쓰기 및 유변학은 일반적으로 방법을 사용한다. 전…

Declarações

The authors have nothing to disclose.

Acknowledgements

We acknowledge support of this work by the National Multiple Sclerosis Society and Simons Center for the Social Brain. BQ acknowledges support from the U.S. National Defense Science & Engineering Graduate Fellowship program.

Materials

Xylaxine Lloyd Laboratoried perscription drug
Ketamine AnaSed Injections perscription drug
Vibratome (Vibrating blade microtome) Leica VT1200
Hibernate-A Medium Gibco A1247501 CO2-independent neural medium for adult tissue
Atomic Force Microscope, MFP-3D-BIO Asylum Research
Petri Dish Heater Asylum Research
AFM Probe, 0.03 N/m, 10 um radius borosilicate sphere Novascan PT.GS
Cell-Tak Corning 354240 mussel-derived bioadhesive
Sodium Bicarbonate Sigma-Aldrich S5761 alternate suppliers can be used
Sodium Hydroxide, 1N Sigma-Aldrich 59223C alternate suppliers can be used
Instrumented Indenter, NanoTest Vantage Micro Materials Ltd. probe tip needs to be machined (steel flat punch, 1mm diameter, 4-5 mm length)
NanoTest Liquid Cell Micro Materials Ltd.
Parallel Plate Rheometer MCR501 Anton-Parr
PP25  Anton-Parr 25 mm diameter flat measurement plate
Adhesive Sandpaper McMaster-Carr 4184A48 alternate suppliers can be used
Loctite 4013 Instant Adhesive Henkel 20268 alternate suppliers can be used

Referências

  1. van Dommelen, J. A. W., Hrapko, M., Peters, G. W. M. Mechanical Properties of Brain Tissue: Characterisation and Constitutive Modelling. Mechanosensitivity of the Nervous System. , 249-281 (2009).
  2. Liu, F., Tschumperlin, D. J. Micro-mechanical characterization of lung tissue using atomic force microscopy. Journal of Visualized Experiments. (54), e2911 (2011).
  3. Peaucelle, A. AFM-based mapping of the elastic properties of cell walls: at tissue, cellular, and subcellular resolutions. Journal of Visualized Experiments. (89), e51317 (2014).
  4. Thomas, G., Burnham, N. A., Camesano, T. A., Wen, Q. Measuring the mechanical properties of living cells using atomic force microscopy. Journal of Visualized Experiments. (76), e50497 (2013).
  5. Moreno-Flores, S., Benitez, R., Vivanco, M. d. M., Toca-Herrera, J. L. Stress relaxation and creep on living cells with the atomic force microscope: a means to calculate elastic moduli and viscosities of cell components. Nanotechnology. 21, 445101 (2010).
  6. Desprat, N., Richert, A., Simeon, J., Asnacios, A. Creep function of a single living cell. Biophysical Journal. 88 (3), 2224-2233 (2005).
  7. Lu, H., Wang, B., Ma, J., Huang, G., Viswanathan, H. Measurement of creep compliance of solid polymers by nanoindentation. Mechanics Time-Dependent Materials. 7 (3/4), 189-207 (2003).
  8. Cheng, L., Xia, X., Scriven, L. E., Gerberich, W. W. Spherical-tip indentation of viscoelastic material. Mechanics of Materials. 37, 213-226 (2005).
  9. Kalcioglu, Z., Qu, M., Van Vliet, Multiscale characterization of relaxation times of tissue surrogate gels and soft tissues. 7th Army Science Conference Proceedings. , (2010).
  10. Moreno-Flores, S., Benitez, R., Vivanco, M. D., Toca-Herrera, J. L. Stress relaxation microscopy: Imaging local stress in cells. Journal of Biomechanics. 43 (2), 349-354 (2010).
  11. Kalcioglu, Z. I., Qu, M., et al. Dynamic impact indentation of hydrated biological tissues and tissue surrogate gels. Philosophical Magazine. 91 (7-9), 1339-1355 (2011).
  12. Kalcioglu, Z. I., Ra Mrozek, R. a., Mahmoodian, R., VanLandingham, M. R., Lenhart, J. L., Van Vliet, K. J. Tunable mechanical behavior of synthetic organogels as biofidelic tissue simulants. Journal of Biomechanics. 46 (9), 1583-1591 (2013).
  13. Janmey, P. A., Georges, P. C., Hvidt, S. Basic rheology for biologists. Methods in Cell Biology. 83, 3-27 (2007).
  14. Miller, K., Kurtcuoglu, V. . Biomechanics of the Brain. , (2011).
  15. Lévy, R., Maaloum, M. Measuring the spring constant of atomic force microscope cantilevers: thermal fluctuations and other methods. Nanotechnology. 13 (1), 33-37 (2002).
  16. Fuierer, R. Basic Operation Procedures for the Asylum Research MFP-3D Atomic Force Microscope. MFP-3D Procedureal Operation “Manualette”. , (2006).
  17. Elkin, B. S., Ilankovan, A., Morrison, B. Age-dependent regional mechanical properties of the rat hippocampus and cortex. Journal of Biomechanical Engineering. 132, 011010 (2010).
  18. Elkin, B. S., Azeloglu, E. U., Costa, K. D., Morrison, B. Mechanical heterogeneity of the rat hippocampus measured by atomic force microscope indentation. Journal of Neurotrauma. 24 (5), 812-822 (2007).
  19. Lee, E. H., Radok, J. R. M. The Contact Problem for Visooelastic Bodies. Journal of Applied Mechanics. 27 (3), 438-444 (1960).
  20. Lin, D. C., Dimitriadis, E. K., Horkay, F. Robust strategies for automated AFM force curve analysis–I. Non-adhesive indentation of soft, inhomogeneous materials. Journal of Biomechanical Engineering. 129 (3), 430-440 (2007).
  21. Constantinides, G., Kalcioglu, Z. I., McFarland, M., Smith, J. F., Van Vliet, K. J. Probing mechanical properties of fully hydrated gels and biological tissues. Journal of Biomechanics. 41 (15), 3285-3289 (2008).
  22. Shen, F., Tay, T. E., et al. Modified Bilston Nonlinear Viscoelastic Model for Finite Element Head Injury Studies. Journal of Biomechanical Engineering — Transactions of the ASME. 128 (5), 797-801 (2006).
  23. van Dommelen, J. a. W., vander Sande, T. P. J., Hrapko, M., Peters, G. W. M. Mechanical properties of brain tissue by indentation: Interregional variation. Journal of the Mechanical Behavior of Biomedical Materials. 3 (2), 158-166 (2010).
  24. Rother, J., Nöding, H., Mey, I., Janshoff, A. Atomic force microscopy-based microrheology reveals significant differences in the viscoelastic response between malign and benign cell lines. Open biology. 4 (5), 140046 (2014).
  25. Du, P., Lu, H., Zhang, X. Measuring the Young’s Relaxation Modulus of PDMS Using Stress Relaxation Nanoindentation. Symposium DD – Microelectromechanical Systems – Materials and Devices III. 1222 (c), (2009).
  26. Elkin, B. S., Morrison, B. Viscoelastic properties of the P17 and adult rat brain from indentation in the coronal plane. Journal of Biomechanical Engineering. 135, 114507 (2013).
  27. Brands, D. W., Bovendeerd, P. H., Peters, G. W., Wismans, J. S., Paas, M. H., van Bree, J. L. Comparison of the dynamic behavior of brain tissue and two model materials. 43rd Stapp Car Crash Conference Proceedings. , 313-320 (1999).
  28. Hrapko, M., van Dommelen, J. A. W., Peters, G. W. M., Wismans, J. S. H. M. Characterisation of the mechanical behaviour of brain tissue in compression and shear. Biorheology. 45 (6), 663-676 (2008).
  29. Pogoda, K., Chin, L., et al. Compression stiffening of brain and its effect on mechanosensing by glioma cells. New Journal of Physics. 16 (7), 075002 (2014).
  30. Peters, G. W. M., Meulman, J. H., Sauren, A. A. H. J. The applicability of the time/temperature superposition principle to brain tissue. Biorheology. 34 (2), 127-138 (1997).
check_url/pt/54201?article_type=t

Play Video

Citar este artigo
Canovic, E. P., Qing, B., Mijailovic, A. S., Jagielska, A., Whitfield, M. J., Kelly, E., Turner, D., Sahin, M., Van Vliet, K. J. Characterizing Multiscale Mechanical Properties of Brain Tissue Using Atomic Force Microscopy, Impact Indentation, and Rheometry. J. Vis. Exp. (115), e54201, doi:10.3791/54201 (2016).

View Video