Journal
/
Engineering
/
Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component
JoVE Journal
Engineering
A subscription to JoVE is required to view this content.  Sign in or start your free trial.
JoVE Journal Engineering
Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component

DOI:
10.3791/50459-v

•

08:31 min

•

November 02, 2013

•

, ,
1Department of Physics,University of California, Irvine, 2Department of Chemistry,University of California, Irvine

Chapters

  • 00:05Title
  • 01:19Catalyzing Sacrificial Fibers
  • 03:45Microvascular Gas Exchange Unit Fabrication
  • 06:56Results: Fabrication of Microvascular Structure in a Resin
  • 08:03Conclusion

Summary

Automatic Translation

Automatic Translation

The Vaporization of a Sacrificial Component (VaSC) process is used to fabricate microvascular structures. This procedure uses sacrificial poly(lactic) acid fibers to form hollow microchannels with precise 3D geometric positioning provided by laser micromachined guide plates.

Tags

3D MicrostructuresVaporization Of Sacrificial ComponentVascular StructuresSnOx-embedded PLA FibersDepolymerizationMicrochannel FabricationAligned Fiber PatterningComplex 3D Microstructure Design

Article

Embed

ADD TO PLAYLIST

Usage Statistics

Related Videos

check_url/50459?article_type=v

Fabrication, Densification, and Replica Molding of 3D Carbon Nanotube Microstructures
check_url/50459?article_type=v

Synthesis of Phase-shift Nanoemulsions with Narrow Size Distributions for Acoustic Droplet Vaporization and Bubble-enhanced Ultrasound-mediated Ablation
check_url/50459?article_type=v

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques
check_url/50459?article_type=v

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions
check_url/50459?article_type=v

Fabrication Process of Silicone-based Dielectric Elastomer Actuators
check_url/50459?article_type=v

Using Synchrotron Radiation Microtomography to Investigate Multi-scale Three-dimensional Microelectronic Packages
check_url/50459?article_type=v

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow
check_url/50459?article_type=v

Challenges in Rheological Characterization of Highly Concentrated Suspensions — A Case Study for Screen-printing Silver Pastes
check_url/50459?article_type=v

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
check_url/50459?article_type=v

Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver

Read Article