Sensing of Barrier Tissue Disruption with an Organic Electrochemical Transistor

Summary

The Organic Electrochemical Transistor is integrated with live cells and used to monitor ion flux across the gastrointestinal epithelial barrier. In this study, an increase in ion flux, related to disruption of tight junctions, induced by the presence of the calcium chelator EGTA (ethylene glycol-bis(beta-aminoethyl ether)-N,N,N’,N’-tetra acetic acid), is measured.

Abstract

The gastrointestinal tract is an example of barrier tissue that provides a physical barrier against entry of pathogens and toxins, while allowing the passage of necessary ions and molecules. A breach in this barrier can be caused by a reduction in the extracellular calcium concentration. This reduction in calcium concentration causes a conformational change in proteins involved in the sealing of the barrier, leading to an increase of the paracellular flux. To mimic this effect the calcium chelator ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetra acetic acid (EGTA) was used on a monolayer of cells known to be representative of the gastrointestinal tract. Different methods to detect the disruption of the barrier tissue already exist, such as immunofluorescence and permeability assays. However, these methods are time-consuming and costly and not suited to dynamic or high-throughput measurements. Electronic methods for measuring barrier tissue integrity also exist for measurement of the transepithelial resistance (TER), however these are often costly and complex. The development of rapid, cheap, and sensitive methods is urgently needed as the integrity of barrier tissue is a key parameter in drug discovery and pathogen/toxin diagnostics. The organic electrochemical transistor (OECT) integrated with barrier tissue forming cells has been shown as a new device capable of dynamically monitoring barrier tissue integrity. The device is able to measure minute variations in ionic flux with unprecedented temporal resolution and sensitivity, in real time, as an indicator of barrier tissue integrity. This new method is based on a simple device that can be compatible with high throughput screening applications and fabricated at low cost.

Introduction

The gastrointestinal epithelium is an example of barrier tissue, which controls the passage of molecules between different compartments of the body. The epithelium consists of elongated columnar cells joined together by complexes of proteins that provide a physical barrier¹ against pathogens and toxins, while allowing the passage of water and nutrients required to sustain the body. This selectivity is due to the polarization of the epithelial cells, which creates two different membrane domains: the apical side of the cells exposed to the lumen and the basal side of the cells anchored on the underlying tissues^2,3. Tight junctions (TJ) are complexes of proteins present at the apical portion of epithelial cells and are part of a larger complex known as the apical junction⁴. Ion flow across the barrier tissue may either go via the transcellular (through the cell) or via a paracellular (between two adjacent cells) pathway. The sum of the transport through both pathways is known as the transepithelial resistance. The apical junction is responsible for the regulation of ions and molecules passing across the barrier^5,6 via a specific opening and closing function. A dysfunction or disruption of these protein complexes is often related to disease^7-11. In addition, many enteric pathogens/toxins are known to specifically target this complex, thereby entering the body and leading to diarrhea, most likely as a consequence of massive dysregulation of ion/water flow across the barrier^12-14. Barrier tissue may also be modified by changing the extracellular microenvironment. Cadherin is a critical protein for cell-cell adhesion, and is involved in the formation of the apical junction. Calcium is required for the correct structural conformation of Cadherin, and a decrease in extracellular calcium has been shown to result in the destruction of the cell-cell junction and a subsequent opening of the paracellular pathway between the cells¹⁵. In this study, EGTA (Ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetra acetic acid), a specific calcium chelator, was used to induce a breach in barrier tissue, as it has been shown to have a rapid and drastic effect on paracellular ion flow^16,17. This calcium chelator was used on a confluent and differentiated monolayer of the Caco-2 cell-line. Cultured in cell culture inserts, this cell line is known to develop the characteristics of the gastrointestinal tract and is widely used by the pharmaceutical industry to test the absorption of drugs^18,19.

Methods to monitor barrier tissue integrity are plentiful. These methods are often optical, relying on immunofluorescence staining of particular proteins known to be at the apical junction²⁰, or relying on the quantification of a fluorescent tracer molecule that is normally impermeable to the barrier tissue^21,22. However, label-free methods (i.e. without a fluorophore/chromophore) are preferable as the use of a label can incur artifacts, and often increases cost and assay time. Electrical, label-free monitoring of barrier tissue has recently emerged as a dynamic monitoring method²³. For example recent technological advances in electrical impedance spectroscopy have allowed the development of a commercially available scanning apparatus^24,25 that can measure transepithelial resistance (TER), a measurement of the ion conductance across the cell layer.

Organic electronics has created a unique opportunity to interface the world of electronics and biology^{26,27 28,29} by using conducting polymers that can conduct both electronic and ionic carriers. A new technique to detect breaches in barrier tissue using the OECT^30-32 was recently introduced. This device was validated against existing techniques used to assess barrier tissue integrity, including immunofluorescence, permeability assays using Lucifer yellow, and impedance spectroscopy using the Cellzscope. In the case of all toxic compounds tested, the OECT was found to operate with equal or better sensitivity, and with increased temporal resolution, compared to the above techniques. In this device, PEDOT:PSS, a conducting polymer that has been shown to be stable and biocompatible^33,34, is used as the active material in the transistor channel. The OECT is composed of drain and source electrodes on either side of a conducting polymer channel. This is then placed in contact with an electrolyte, which forms an integral part of the device. A gate electrode is immersed in the electrolyte (Figure 1), and when a positive gate voltage is applied at the gate, cations from the electrolyte are forced into the channel, thus dedoping the conducting polymer and resulting in a change in the source-drain current. The device is thus extremely sensitive to minute changes in ionic flux due to amplification by the transistor. A cell layer grown on a cell culture insert was placed between the gate electrode and the conducting polymer channel. The presence of an intact cell layer acts as barrier for the cations entering into the conducting polymer, therefore, in the presence of an intact monolayer, the drain current decreases (Figure 2: transition from region a to b). In the presence of a toxic compound, the barrier tissue will progressively lose its integrity, letting the cations enter into the polymer film and increasing the drain current (Figure 2: region c). With this technique, the breach in barrier tissue is seen by the modulation of the drain current, corresponding to the modulation of the flux across the monolayer. This device is able to measure minute variations in ionic flux with unprecedented temporal resolution and sensitivity in real time. This technology will be of interest in the domain of toxicology for drug testing, disease diagnostics or basic research as the barrier model can be easily adapted. This method will also help to reduce animal experimentation, as it allows the validation of in vitro models to replace in vivo testing.

Protocol

1. PEDOT:PSS Solution Preparation To 50 ml of PEDOT:PSS, add ethylene glycol (increases conductivity) in a volume ratio of 1:4 (ethylene glycol to PEDOT:PSS), 0.5 μl/ml of Dodecylbenzenesulfonic acid (DBSA) as a surfactant, and 10 mg/ml 3-glycidoxypropyltrimethoxysilane (GOPS) as a cross-linker to promote adhesion of the conducting polymer to the glass slide. 2. OECT Fabrication (Figure 3) Define thermally evaporated gold source and drain contacts …

Representative Results

During the first step of measurement, the drain current may vary somewhat, but in most cases it should remain stable (Figure 2, section a). If the signal is not stable, the transistor should be discarded and replaced. This stability check also ensures that any initial losses in conductivity of the device do not affect the subsequent measurement. After several minutes of measurement, the insert with cells forming barrier tissue is placed on top of the channel. The drain current should immediately decrease…

Discussion

This technique provides a novel method to integrate an organic electrochemical transistor with live cells to measure barrier tissue integrity. The main advantages of this technique are the rapidity and sensitivity, but also the low cost of the device for dynamic monitoring of barrier tissue.

As this method uses live cells, a critical point is to be sure to use a monolayer, which represents an intact barrier layer. The parameters of the barrier should be defined during the characterization of t…

Materials

CLEVIOS PH 1000	HERAUS CLEVIOS
AZ9260 resin	CIPEC SPECIALITIES
Dodecylbenzenesulfonic acid (DBSA)	Acros Organic
3-glycidoxypropyltrimethoxysilane (GOPS)	Sigma Aldrich
24-well Suspended cell Culture insert Millicell  PET 0.4 μm Millipore	Dominique dutscher	51705
24-well cell culture plate BD Falcon	Dominique dutscher	51705
STERICUP-GP PES 0.22 μM	Dominique dutscher	51246
ADVANCED DMEM Marque GIBCO	Fisher scientific	E3434T
FBS HEAT INACT. S.AMERICAN	Fisher scientific	E3387M
PENICILLIN STREPTOMYCIN	Fisher scientific	E3470C
GLUTAMAX	Fisher scientific	E3524T
TRYPSIN 0.05% EDTA	Fisher scientific	E3513N
EGTA (Ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid)	Sigma Aldrich	E4378
ETHYLENE GLYCOL, ANHYDROUS, 99.8%,	Sigma aldrich
Caco-2 cells	ATCC
PDMS	Dow corning	SYLGARD 184 SILICONE ELASTOMER
Au (99.99%)	NEYCO	AU3X6
Chromium (99.95%)	NEYCO
Parylene C	Specialty Coating Systems
Ag/AgCl wire	HARVARD APPARATUS
Photoresist	CIPEC SPECIALITIES	Résine AZ9260