Zebrafish embryos are used for evaluating the toxicity of chemical compounds. They develop externally and are sensitive to chemicals, allowing detection of subtle phenotypic changes. The experiment only requires a small amount of compound, which is directly added to the plate containing embryos, making the testing system efficient and cost-effective.
The zebrafish is a widely used vertebrate model organism for the disease and phenotype-based drug discovery. The zebrafish generates many offspring, has transparent embryos and rapid external development. Zebrafish embryos can, therefore, also be used for the rapid evaluation of toxicity of the drugs that are precious and available in small quantities. In the present article, a method for the efficient screening of the toxicity of chemical compounds using 1-5-day post fertilization embryos is described. The embryos are monitored by stereomicroscope to investigate the phenotypic defects caused by the exposure to different concentrations of compounds. Half-maximal lethal concentrations (LC50) of the compounds are also determined. The present study required 3-6 mg of an inhibitor compound, and the whole experiment takes about 8-10 h to be completed by an individual in a laboratory having basic facilities. The current protocol is suitable for testing any compound to identify intolerable toxic or off-target effects of the compound in the early phase of drug discovery and to detect subtle toxic effects that may be missed in the cell culture or other animal models. The method reduces procedural delays and costs of drug development.
Drug development is an expensive process. Before a single chemical compound is approved by the Food and Drug Administration (FDA) and European Medicines Agency (EMA) several thousand compounds are screened at a cost of over one billion dollars1. During the preclinical development, the largest part of this cost is required for the animal testing2. To limit the costs, researchers in the field of drug development need alternative models for the safety screening of chemical compounds3. Therefore, in the early phase of the drug development, it would be very beneficial to use a method that can rapidly evaluate the safety and toxicity of the compounds in a suitable model. There are several protocols that have been used for the toxicity screening of chemical compounds involving animal and cell culture models but there is not a single protocol that is validated and is in common use4,5. Existing protocols using zebrafish vary in length and have been used by individual researchers who evaluated the toxicity as per their convenience requirement6,7,8,9,10,11,12.
In the recent past, the zebrafish has emerged as a convenient model for the evaluation of the toxicity of chemical compounds during embryonic development6,7. The zebrafish has many in-built advantages for the evaluation of chemical compounds13. Even large-scale experiments are amenable, as a zebrafish female can lay batches of 200-300 eggs, which develop rapidly ex vivo, do not need external feeding for up to a week and are transparent. The compounds can be added directly into the water, where they can (depending on the nature of the compound) diffuse through the chorion, and after hatching, through the skin, gills and mouth of larvae. The experiments do not require copious amounts of chemical compounds14 due to the small size of the embryo. Developing zebrafish embryos express most of the proteins required to achieve the normal developmental outcome. Therefore, a zebrafish embryo is a sensitive model to assess whether a potential drug can disturb the function of a protein or signaling molecule that is developmentally significant. The organs of the zebrafish become functional between 2-5 dpf15, and compounds that are toxic during this sensitive period of embryonic development induce phenotypic defects in zebrafish larvae. These phenotypic changes can be readily detected using a simple microscope without invasive techniques11. Zebrafish embryos are widely used in toxicological research due to their much greater biological complexity compared to in vitro drug screening using cell culture models16,17. As a vertebrate, the genetic and physiologic makeup of zebrafish is comparable to humans and hence toxicities of chemical compounds are similar between zebrafish and humans8,18,19,20,21,22. Zebrafish is, thus, a valuable tool in the early phase of drug discovery for the evaluation of toxicity and safety of the chemical compounds.
In the present article, we provide a detailed description of the method used for evaluating the safety and toxicity of carbonic anhydrase (CA) inhibitor compounds using 1-5-day post fertilization (dpf) zebrafish embryos by a single researcher. The protocol involves exposing zebrafish embryos to different concentrations of chemical inhibitor compounds and studying the mortality and phenotypic changes during the embryonic development. At the end of the exposure to the chemical compounds, the LC50 dose of the chemical is determined. The method allows an individual to carry out efficient screening of 1-5 test compounds and takes about 8-10 h depending on the experience of the person with the method (Figure 1). Each of the steps required to assess the toxicity of the compounds is outlined in Figure 2. The evaluation of toxicity of CA inhibitors requires 8 days, and includes setting up of mating pairs (day 1); collection of embryos from breeding tanks, cleaning and transferring them to 28.5 °C incubator (day 2); distribution of the embryos into the wells of a 24-well plate and addition of diluted CA inhibitor compounds (day 3); phenotypic analysis and imaging of larvae (day 4-8), and determination of LC50 dose (day8). This method is rapid and efficient, requires a small amount of the chemical compound and only basic facilities of the laboratory.
The zebrafish core facility at Tampere University has an establishment authorization granted by the National Animal Experiment Board (ESAVI/7975/04.10.05/2016). All the experiments using zebrafish embryos were performed according to the Provincial Government of Eastern Finland, Social and Health Department of Tampere Regional Service Unit protocol # LSLH-2007-7254/Ym-23.
1. Setting Up of Overnight Zebrafish Mating Tanks
2. Collection of Embryos and Preparing Plates for Exposure to the Chemical Compounds
3. Preparations of the Stock Solution of Chemical Compounds and Distribution of Diluted Compound into the Wells
4. Phenotypic Analysis and Imaging of the Embryos Using a Stereomicroscope
The critical part of the evaluation of toxicity is testing different concentrations of one or multiple chemical compounds in a single experiment. In the beginning, select the compounds for evaluation of toxicity, the number of concentrations to test for each compound, and accordingly, make a chart (Figure 3). We used a unique color for each compound to organize the samples (Figure 3). The use of solvent resistant marker and labeling at the bottom or sides of the plates is important to avoid mix-up later. If the compounds induce any phenotypic defects in the larvae exposed to different concentrations of inhibitors, the defects are recorded every 24 h over the period of 1-5 dpf (Figure 4A,B,C,D). The embryos treated with a known CA IX inhibitor at a concentration of 500 μM did not show any apparent phenotypic changes in the 1-5 days of exposure to the chemical compound (Figure 4B). Figure 4C and Figure 4D shows the embryos treated with β-CA inhibitors that induced various phenotypic defects unhatched embryos even at day 3 (arrow head), curved body structure (arrow), unutilized yolk sack and pericardial edema (arrow head) and absence of otolith sacs in the larvae at 5 days after treatment with chemical compound (arrow). In another study, the embryos treated with CA inhibitor (Figure 4E) shows the absence of otolith sacs and swim bladder (arrow heads). In our study, (Figure 4C,D), we documented phenotypic defects (fragile embryos and absence of pigmentation) even after day 1 of exposure to CA inhibitors. The phenotypic analyses showed that some of the inhibitor compounds are lethal and cannot be developed as drugs for human use (Figure 4C,D and Table 1).
The experiments identified a representative compound which induced minimal or no phenotypic changes during embryonic development and showed a high LC50 dose (Figure 5), suggesting that the compound is safe for further characterization and can be potentially developed into a drug candidate for human use16. Looking at still images of larvae exposed to the compound showed no phenotypic defects (Figure 4B). However, the same compound was found to be neurotoxic and induced ataxia in the larvae after 5-days of exposure to the CA inhibitor (Figure 6). This phenotype could only be detected by directly observing the swimming behavior of the zebrafish larvae under the microscope. These studies suggested that the neural development of zebrafish larvae is sensitive to the compound16,17.
Figure 1: Time in hours required for the rapid screening of chemical compounds using zebrafish embryos: In one set of experiments, a person with hands-on experience can screen about 5 chemical compounds (each compound requiring a minimum of 6 dilutions) using zebrafish embryos in 24-well plates. In total, it takes about 8-10 h from the setting up of crosses to performing LC50 determination over a period of 8 days.
Figure 2: Chart showing the breakdown of toxicity evaluation of chemical compounds. Toxicity screening of chemical compounds requires 8 days and can be broken down into five steps. (Day 1) Consists of setting up of zebrafish mating pairs in tanks. (Day 2) Involves collecting embryos from the mating tanks into Petri dishes followed by keeping them at a 28.5 °C incubator for overnight. (Day 3) Examination of embryos using a stereomicroscope and cleaning the embryos. Distribution of the embryos into 24-well plates and adding the dilutions of the test compounds. (Day 4-8) Phenotypic analyses of larvae for developmental defects. Swim pattern study and LC50 determination was performed on the last day of exposure to compounds. Please click here to view a larger version of this figure.
Figure 3: Schematic presentation of experiments involved in toxicity evaluation. The toxicity evaluation consists of preparing tabulated chart containing information about chemical compounds, dilutions of the compounds and parameters to be assessed. Making the dilution of stock solutions to the desired concentrations in 15 mL centrifuge tubes (the dilution from one tube to be added to each row of the 24-well plate). A 24-well plate marked with a water proof marker with the name of the test compound, concentration in each row, and date of exposure. Examination and imaging of embryos by transferring the larvae onto a small Petri dish containing 3% high molecular weight methyl cellulose. Please click here to view a larger version of this figure.
Figure 4: Example of phenotypic analysis of the larvae in the control and test compound treated groups. (A) Phenotypic analyses of the control group larvae not treated with any compound showed no phenotypic defect under a microscope. (B) Larvae treated with 500 μM CA inhibitor (known inhibitor of carbonic anhydrase IX showed no observable phenotypic defects. (C, D) The developing larvae treated with β-CA inhibitor with concentrations of 250 μΜ and 125 μM respectively. The compounds induced phenotypic defects such as curved body, pericardial edema, and unutilized yolk sac (arrows and arrow heads). Panels A and B has been modified from Aspatwar et al16. The panels C, D and E show previously unpublished images, which were obtained using a different microscope. Please click here to view a larger version of this figure.
Figure 5: Determination of lethal concentration 50 (LC50) using 1-5 dpf zebrafish larvae. Toxicity assessment using zebrafish embryos allows researchers to determine the minimum lethal concentration of the chemical compound at the end of the experiment. The LC50 concentration of the compound (a known CA IX inhibitor) was 3.5 mM. The high LC50 concentration allows further characterization of the compound. This figure has been modified from Aspatwar et al.16. Please click here to view a larger version of this figure.
Figure 6: An example of swim pattern analysis in both untreated (A) and inhibitor treated (B) groups of larvae. The zebrafish larvae treated in panel B with 300 μM test inhibitor compound (a known inhibitor of human carbonic anhydrase IX) showed an abnormal (ataxic) movement pattern (arrow heads), suggesting that the compound induces neurotoxicity in the developing embryos. The arrowheads point to the normal curvature of the tail during swimming. In panel A the arrows point to the normal curvature of the tail during swimming. This figure has been modified from Aspatwar et al.16. Please click here to view a larger version of this figure.
CA inhibitor | Toxicity Screening | LC50 | In vivo | Toxic CAIs | Reference |
Carbamates | 24 | Tous | 1a | 3b | 24, Unpublished |
Coumarins | 10 | Tous | – | 2 | Unpublished |
Nitroimidazoles | 2 | Tous | 2 | 2c | 16 |
Sulfonamides | 5 | Tous | – | 3 | 25 |
Total | 41 | Tous | 3 | 10 | – |
aBased on the toxicity screening, the inhibitor was used for inhibition of Mycobacterium marinum in zebrafish model. bLethal inhibitor, cNeurotoxic above 300 μM concentration |
Table 1: A summary of the safety and toxicity of the compounds screened. The toxicity evaluation experiment helps the researcher to reach a conclusion about the safety of the tested chemical compounds. The LC50 concentration allows to define safe concentration for further characterization. A researcher can decide if the compound is lethal even after 24 h of exposure of embryos to the compound under investigation. In our example, a subtle effect on swimming due to neurotoxicity is the significant information, which is helpful for setting up further experiments. Accordingly, based on the toxicity screening, we were able to use safe concentrations of the CA inhibitor for further characterization in vivo24.
In vitro toxicity test using cultured cells can detect survival and morphological studies of the cells providing limited information about the toxicity induced by the test compound. The advantage of toxicity screening of chemical compounds using zebrafish embryos is rapid detection of chemically induced phenotypic changes in a whole animal during embryonic development in a relevant model organism. Approximately 70% of protein-coding human genes have orthologs counterparts in the zebrafish genome25. Genetic pathways controlling the signal transduction and development are highly conserved between human and zebrafish26, and, therefore, chemical compounds are likely to have similar toxic effects in humans25.
Zebrafish are at the forefront of toxicological research and have already been extensively used to detect toxins in water samples and to study the mechanism of action of environmental toxins and their effects on the animal27. In this article, we show the use of developing zebrafish embryos to evaluate the toxicity of potential compounds at the early phase of drug discovery. Our rapid and multifaceted toxicity assessment is based on 1) changes in the phenotype of the organism (hatching, otolith sacs, pericardial edema, yolk sac utilization, notochord development, heartbeat, swim bladder development, movement) during embryonic development over a period of 5 days, and 2) determination of the lethal concentration (LC50). Reasonable hours of hands-on work (8-10 h divided over 8 days) is enough to determine the toxicity profile of a compound using this procedure. For newly synthesized compounds that are available in limited amounts, toxicity can be evaluated using a minimum of 3 mg of the compound. No special equipment is required. The procedure is, thus, a rapid and low-cost way to evaluate the toxic effects of any compound that can potentially be developed into the drug for human use.
The quality of the batch of embryos has a great impact on the outcome of the experiment. The quality of eggs (including the rate of fertilization) is not obvious immediately after collection from the breeding tanks (0-4 hpf). For obtaining only normally developing embryos for the experiments, before adding compounds, we allow the embryos to remain at 28.5 °C for 24 h after the collection from the breeding tanks. After 24 hpf, any dead or unhealthy-looking embryos are discarded. In addition to this, it is advisable to have a mock-treated group of embryos in each experiment to further control for the quality of the batch of eggs used in the experiment as well as to see the baseline mortality to accurately determine LC50.
A mock-treated group is also needed to control for the toxicity of the vehicle of choice. Many chemicals are insoluble in water and DMSO is often used as the vehicle for the delivery of the test compounds. DMSO is generally well tolerated by the embryos in lower (0.1%) concentrations28. Sometimes, the compounds are not completely soluble even in DMSO and the solution appears cloudy making it difficult for the evaluation of the toxicity. In such cases, to get the stock solution of the compound completely soluble and clear, adding a drop of 0.1% NaOH will solve the problem. Appropriate control groups need to be set up for assessing the toxicity of the compound accurately. If other vehicles are used, their inherent toxicity might affect the experiment.
Each well of a 24-well plate contains from 1-10 embryos submerged in a total volume of 1 mL. If the test compound is available only in small amounts, it may be necessary to use up to 10 embryos per well for evaluating its toxicity. It is highly recommended that only 1 embryo per well should be used for each analysis16,24,29. The plate is stored at 28.5 °C incubator for 5 days. Sometimes significant evaporation is observed causing a marked change in the concentration of the compound in a given well16. By sealing the 24-well plates with paraffin films from all sides, placing embryos only in the middle wells and filling the other wells along the rims with water, the problems caused by evaporation can be avoided. In our earlier studies, we did not observe any evaporation of the diluents of the chemicals from 24-well plates24,29. Also, if the compound in question is known to be unstable under ambient temperatures, daily changes of water with fresh compound will be needed for reliable results.
The swim pattern of zebrafish larvae is analyzed after the 5 days of exposure to the compound. The wells of a 24-well plate containing 5 dpf larvae are not ideal for the purpose due to the limited size of the well. Therefore, for accurate analysis of swim pattern, the larvae need to be transferred to a Petri dish containing 50 mL of E3 water and can settle for 2 min before the analysis. In our study, only two inhibitors showed the effect on swim pattern16 among the 52 α-CA and β-CA inhibitors screened for safety and toxicity, based on our experience this test can detect subtle changes including mild ataxic movement of the larvae.
This study demonstrated that the only limitation to the current method is physical dexterity. This concern can be overcome through repetition, as the skill of a person improves with practice. Once the expertise is achieved the evaluation of compounds using zebrafish embryos is ethical, easy, efficient and informative. We, therefore, expect that such a rapid assay using zebrafish embryos will become a popular tool for the in vivo toxicity screening in the early phase of drug development.
The authors have nothing to disclose.
The work was supported by grants from Sigrid Juselius Foundation (SP, MP), Finnish Cultural Foundation (AA, MH), Academy of Finland (SP, MP), Orion Farmos Foundation (MH), Tampere Tuberculosis Foundation (SP, MH and MP) and Jane and Aatos Erkko Foundation (SP and MP). We thank our Italian and French collaborators, Prof. Supuran, and Prof. Winum, for providing carbonic anhydrase inhibitors for safety and toxicity evaluation for anti-TB and anti-cancer drug development purposes. We thank Aulikki Lehmus and Marianne Kuuslahti for the technical assistance. We also thank Leena Mäkinen and Hannaleena Piippo for their help with the zebrafish breeding and collection of embryos. We sincerely thank Harlan Barker for critical evaluation of the manuscript and insightful comments.
24-well plates | Nunc | Thermo Scientific | |
Balance (Weighing scale) | KERN | PLJ3000-2CM | |
Balance (Weighing scale) | Mettler Toledo | AB104-S/PH | |
CaCl2 | JT.Baker | RS421910024 | |
Disecting Probe | Thermo Scientific | 17-467-604 | |
DMSO | Sigma Aldrich, Germany | D4540 | |
Falcon tubes 15 mL | Greiner bio-one | 188271 | |
High molecular weight methylcellulose | Sigma Aldrich, Germany | M0262 | |
Incubator for zebrafish larvae | Termaks | B8000 | |
KCL | Merck | 1.04936.0500 | |
Methyl Blue | Sigma Aldrich, Germany | 28983-56-4 | |
MgSO4 | Sigma Aldrich, Germany | M7506 | |
Microcentrifuge tubes | Starlab | S1615-5500 | |
NaCl | VWR Chemicals | 27810.295 | |
Paraffin Histoplast IM | Thermo Scientific | 8331 | |
Pasteur pipette | Sarstedt | 86.1171 | |
Petri dish | Thermo Scientific | 101R20 | |
Petri plates | Sarstedt | 82.1473 | |
Pipette (1 mL and 200 μL) | Thermo Scientific | 4641230N, 4641210N | |
Plates 24-Well | Thermo Scientific | 142485 | |
Steriomicroscope/Camera | Zeiss | Stemi 2000-C/Axiocam 105 color | |
Vials (1.5 mL) | Fisherbrand | 11569914 | |
Zebrafish AB strains | ZIRC | ZL1 |